Hi Guys, Hope all are well? sorry to post but Im just trying to get something working where Im trying to convert a php function script into the kamailio.cfg. Im getting there but wonder how I can group results of sets of avps with another avp. Say I have these variables; $(avp(NTgrp)) = 'SB100_000361@1.2.3.4|SB100_000213@1.2.3.5|SB100_000225@1.2.3.6|SB100_000361@1.2.3.7|SB100_000213@1.2.3.8';$(avp(Prio)) = '1|1|1|2|2';$(avp(Wgt)) = '10000|10000|80000|30000|70000';$(avp(CInc)) = '0|0|1|0|1';$(avp(WTot))= '100000|100000|100000|100000|100000'; I then run a while script to split up their variables via the delimiter | in user; $var(j)=0;while($var(j)<$var(count)) {$(avp(NTgrpP))=$(avp(NTgrp){s.select,$var(j),|});$(avp(PrioP))=$(avp(Prio){s.select,$var(j),|});$(avp(WgtP))=$(avp(Wgt){s.select,$var(j),|});$(avp(CIncP))=$(avp(CInc){s.select,$var(j),|});$(avp(WTotP))=$(avp(WTot){s.select,$var(j),|});xlog("L_INFO"," Now Each time we have $(avp(NTgrpP)) $(avp(PrioP)) $(avp(WgtP)) $(avp(CIncP)) $(avp(WTotP))\n");$var(j)=$var(j)+1;} This then results in;INFO: <script>: Now Each time we have SB100_000223@1.2.3.4 1 10000 0 100000INFO: <script>: Now Each time we have SB100_000225@1.2.3.5 1 10000 0 100000INFO: <script>: Now Each time we have SB100_000386@1.2.3.6 1 80000 0 100000INFO: <script>: Now Each time we have SB100_000213@1.2.3.7 2 30000 0 100000INFO: <script>: Now Each time we have SB100_000361@1.2.3.8 2 70000 0 100000 Now what Id like to do is group them via priorities so I can do some further functional checks on them when in same priority group, as you can see there are 3 results at priority 1 and 2 at priority 2. Is there away I can create something of a multi-array using the AVP $(avp(PrioP)) I just created so I can group by priority? As in php I would do something like; $multi_arr[$prio_arr[$p]][] = array( "ntgrp" => $ntgrp_arr[$p], "prio" => $prio_arr[$p], "wght" => $wght_arr[$p], "cinc" => $cinc_arr[$p], "wtot" => $wtot_arr[$p], ); } Any help would be great. Many thanks Jon
Jon,
For complex, nonscalar structures where members can be other AVP nonscalars, you might wish to consider XAVPs instead:
http://www.kamailio.org/wiki/cookbooks/4.3.x/pseudovariables#xavp_id_-_xavps
Otherwise, you're playing life on hard mode. ;-)
-- Alex
On 10/23/2015 01:00 PM, Jonathan Hunter wrote:
Hi Guys,
Hope all are well?
sorry to post but Im just trying to get something working where Im trying to convert a php function script into the kamailio.cfg.
Im getting there but wonder how I can group results of sets of avps with another avp.
Say I have these variables;
$(avp(NTgrp)) = 'SB100_000361@1.2.3.4|SB100_000213@1.2.3.5|SB100_000225@1.2.3.6|SB100_000361@1.2.3.7|SB100_000213@1.2.3.8'; $(avp(Prio)) = '1|1|1|2|2'; $(avp(Wgt)) = '10000|10000|80000|30000|70000'; $(avp(CInc)) = '0|0|1|0|1'; $(avp(WTot))= '100000|100000|100000|100000|100000'; I then run a while script to split up their variables via the delimiter | in user;
$var(j)=0; while($var(j)<$var(count)) { $(avp(NTgrpP))=$(avp(NTgrp){s.select,$var(j),|}); $(avp(PrioP))=$(avp(Prio){s.select,$var(j),|}); $(avp(WgtP))=$(avp(Wgt){s.select,$var(j),|}); $(avp(CIncP))=$(avp(CInc){s.select,$var(j),|}); $(avp(WTotP))=$(avp(WTot){s.select,$var(j),|}); xlog("L_INFO"," Now Each time we have $(avp(NTgrpP)) $(avp(PrioP)) $(avp(WgtP)) $(avp(CIncP)) $(avp(WTotP))\n"); $var(j)=$var(j)+1; }
This then results in; INFO: <script>: Now Each time we have SB100_000223@1.2.3.4 1 10000 0 100000 INFO: <script>: Now Each time we have SB100_000225@1.2.3.5 1 10000 0 100000 INFO: <script>: Now Each time we have SB100_000386@1.2.3.6 1 80000 0 100000 INFO: <script>: Now Each time we have SB100_000213@1.2.3.7 2 30000 0 100000 INFO: <script>: Now Each time we have SB100_000361@1.2.3.8 2 70000 0 100000
Now what Id like to do is group them via priorities so I can do some further functional checks on them when in same priority group, as you can see there are 3 results at priority 1 and 2 at priority 2.
Is there away I can create something of a multi-array using the AVP $(avp(PrioP)) I just created so I can group by priority?
As in php I would do something like;
$multi_arr[$prio_arr[$p]][] = array( "ntgrp" => $ntgrp_arr[$p], "prio" => $prio_arr[$p], "wght" => $wght_arr[$p], "cinc" => $cinc_arr[$p], "wtot" => $wtot_arr[$p], ); }
Any help would be great.
Many thanks
Jon
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Alex, Thanks for the fast response! I dont like hard mode, my lifes tough enough :) Will try the XAVPs. Thanks Jon
To: sr-users@lists.sip-router.org From: abalashov@evaristesys.com Date: Fri, 23 Oct 2015 13:07:27 -0400 Subject: Re: [SR-Users] Multi-Array with AVPs
Jon,
For complex, nonscalar structures where members can be other AVP nonscalars, you might wish to consider XAVPs instead:
http://www.kamailio.org/wiki/cookbooks/4.3.x/pseudovariables#xavp_id_-_xavps
Otherwise, you're playing life on hard mode. ;-)
-- Alex
On 10/23/2015 01:00 PM, Jonathan Hunter wrote:
Hi Guys,
Hope all are well?
sorry to post but Im just trying to get something working where Im trying to convert a php function script into the kamailio.cfg.
Im getting there but wonder how I can group results of sets of avps with another avp.
Say I have these variables;
$(avp(NTgrp)) = 'SB100_000361@1.2.3.4|SB100_000213@1.2.3.5|SB100_000225@1.2.3.6|SB100_000361@1.2.3.7|SB100_000213@1.2.3.8'; $(avp(Prio)) = '1|1|1|2|2'; $(avp(Wgt)) = '10000|10000|80000|30000|70000'; $(avp(CInc)) = '0|0|1|0|1'; $(avp(WTot))= '100000|100000|100000|100000|100000'; I then run a while script to split up their variables via the delimiter | in user;
$var(j)=0; while($var(j)<$var(count)) { $(avp(NTgrpP))=$(avp(NTgrp){s.select,$var(j),|}); $(avp(PrioP))=$(avp(Prio){s.select,$var(j),|}); $(avp(WgtP))=$(avp(Wgt){s.select,$var(j),|}); $(avp(CIncP))=$(avp(CInc){s.select,$var(j),|}); $(avp(WTotP))=$(avp(WTot){s.select,$var(j),|}); xlog("L_INFO"," Now Each time we have $(avp(NTgrpP)) $(avp(PrioP)) $(avp(WgtP)) $(avp(CIncP)) $(avp(WTotP))\n"); $var(j)=$var(j)+1; }
This then results in; INFO: <script>: Now Each time we have SB100_000223@1.2.3.4 1 10000 0 100000 INFO: <script>: Now Each time we have SB100_000225@1.2.3.5 1 10000 0 100000 INFO: <script>: Now Each time we have SB100_000386@1.2.3.6 1 80000 0 100000 INFO: <script>: Now Each time we have SB100_000213@1.2.3.7 2 30000 0 100000 INFO: <script>: Now Each time we have SB100_000361@1.2.3.8 2 70000 0 100000
Now what Id like to do is group them via priorities so I can do some further functional checks on them when in same priority group, as you can see there are 3 results at priority 1 and 2 at priority 2.
Is there away I can create something of a multi-array using the AVP $(avp(PrioP)) I just created so I can group by priority?
As in php I would do something like;
$multi_arr[$prio_arr[$p]][] = array( "ntgrp" => $ntgrp_arr[$p], "prio" => $prio_arr[$p], "wght" => $wght_arr[$p], "cinc" => $cinc_arr[$p], "wtot" => $wtot_arr[$p], ); }
Any help would be great.
Many thanks
Jon
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alex Balashov | Principal | Evariste Systems LLC 303 Perimeter Center North, Suite 300 Atlanta, GA 30346 United States
Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi Alex and guys, Are there any further examples of XAVPs used in this manner? So associate a number of variables by another variable? I am trying with a number of scenarios but the penny is yet to drop! Sorry! Jon
From: hunterj91@hotmail.com To: sr-users@lists.sip-router.org Date: Fri, 23 Oct 2015 17:13:47 +0000 Subject: [SR-Users] Multi-Array with AVPs
Alex, Thanks for the fast response! I dont like hard mode, my lifes tough enough :) Will try the XAVPs. Thanks Jon
To: sr-users@lists.sip-router.org From: abalashov@evaristesys.com Date: Fri, 23 Oct 2015 13:07:27 -0400 Subject: Re: [SR-Users] Multi-Array with AVPs
Jon,
For complex, nonscalar structures where members can be other AVP nonscalars, you might wish to consider XAVPs instead:
http://www.kamailio.org/wiki/cookbooks/4.3.x/pseudovariables#xavp_id_-_xavps
Otherwise, you're playing life on hard mode. ;-)
-- Alex
On 10/23/2015 01:00 PM, Jonathan Hunter wrote:
Hi Guys,
Hope all are well?
sorry to post but Im just trying to get something working where Im trying to convert a php function script into the kamailio.cfg.
Im getting there but wonder how I can group results of sets of avps with another avp.
Say I have these variables;
$(avp(NTgrp)) = 'SB100_000361@1.2.3.4|SB100_000213@1.2.3.5|SB100_000225@1.2.3.6|SB100_000361@1.2.3.7|SB100_000213@1.2.3.8'; $(avp(Prio)) = '1|1|1|2|2'; $(avp(Wgt)) = '10000|10000|80000|30000|70000'; $(avp(CInc)) = '0|0|1|0|1'; $(avp(WTot))= '100000|100000|100000|100000|100000'; I then run a while script to split up their variables via the delimiter | in user;
$var(j)=0; while($var(j)<$var(count)) { $(avp(NTgrpP))=$(avp(NTgrp){s.select,$var(j),|}); $(avp(PrioP))=$(avp(Prio){s.select,$var(j),|}); $(avp(WgtP))=$(avp(Wgt){s.select,$var(j),|}); $(avp(CIncP))=$(avp(CInc){s.select,$var(j),|}); $(avp(WTotP))=$(avp(WTot){s.select,$var(j),|}); xlog("L_INFO"," Now Each time we have $(avp(NTgrpP)) $(avp(PrioP)) $(avp(WgtP)) $(avp(CIncP)) $(avp(WTotP))\n"); $var(j)=$var(j)+1; }
This then results in; INFO: <script>: Now Each time we have SB100_000223@1.2.3.4 1 10000 0 100000 INFO: <script>: Now Each time we have SB100_000225@1.2.3.5 1 10000 0 100000 INFO: <script>: Now Each time we have SB100_000386@1.2.3.6 1 80000 0 100000 INFO: <script>: Now Each time we have SB100_000213@1.2.3.7 2 30000 0 100000 INFO: <script>: Now Each time we have SB100_000361@1.2.3.8 2 70000 0 100000
Now what Id like to do is group them via priorities so I can do some further functional checks on them when in same priority group, as you can see there are 3 results at priority 1 and 2 at priority 2.
Is there away I can create something of a multi-array using the AVP $(avp(PrioP)) I just created so I can group by priority?
As in php I would do something like;
$multi_arr[$prio_arr[$p]][] = array( "ntgrp" => $ntgrp_arr[$p], "prio" => $prio_arr[$p], "wght" => $wght_arr[$p], "cinc" => $cinc_arr[$p], "wtot" => $wtot_arr[$p], ); }
Any help would be great.
Many thanks
Jon
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alex Balashov | Principal | Evariste Systems LLC 303 Perimeter Center North, Suite 300 Atlanta, GA 30346 United States
Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
when adding an xavp structure, use:
$xavp(a=>b) = "...";
Now, adding another fieldx to the structure:
$xavp(a[0]=>c) = "..."; $xavp(a[0]=>d) = "...";
Pushing another new structure means starting from beginning:
$xavp(a=>b) = "...";
The previous structure will be available at index 1:
$xavp(a[1]=>b) = "...";
As alternative, maybe it is easier to return (or pack) all those attributes in a json document and then use jansson module to navigate through it via json-path mechanism.
Cheers, Daniel
On 24/10/15 21:38, Jonathan Hunter wrote:
Hi Alex and guys,
Are there any further examples of XAVPs used in this manner?
So associate a number of variables by another variable?
I am trying with a number of scenarios but the penny is yet to drop!
Sorry!
Jon
From: hunterj91@hotmail.com To: sr-users@lists.sip-router.org Date: Fri, 23 Oct 2015 17:13:47 +0000 Subject: [SR-Users] Multi-Array with AVPs
Alex,
Thanks for the fast response!
I dont like hard mode, my lifes tough enough :)
Will try the XAVPs.
Thanks
Jon
To: sr-users@lists.sip-router.org From: abalashov@evaristesys.com Date: Fri, 23 Oct 2015 13:07:27 -0400 Subject: Re: [SR-Users] Multi-Array with AVPs
Jon,
For complex, nonscalar structures where members can be other AVP nonscalars, you might wish to consider XAVPs instead:
http://www.kamailio.org/wiki/cookbooks/4.3.x/pseudovariables#xavp_id_-_xavps
Otherwise, you're playing life on hard mode. ;-)
-- Alex
On 10/23/2015 01:00 PM, Jonathan Hunter wrote:
Hi Guys,
Hope all are well?
sorry to post but Im just trying to get something working where Im trying to convert a php function script into the kamailio.cfg.
Im getting there but wonder how I can group results of sets of
avps with
another avp.
Say I have these variables;
$(avp(NTgrp)) =
'SB100_000361@1.2.3.4|SB100_000213@1.2.3.5|SB100_000225@1.2.3.6|SB100_000361@1.2.3.7|SB100_000213@1.2.3.8';
$(avp(Prio)) = '1|1|1|2|2'; $(avp(Wgt)) = '10000|10000|80000|30000|70000'; $(avp(CInc)) = '0|0|1|0|1'; $(avp(WTot))= '100000|100000|100000|100000|100000'; I then run a while script to split up their variables via the
delimiter
| in user;
$var(j)=0; while($var(j)<$var(count)) { $(avp(NTgrpP))=$(avp(NTgrp){s.select,$var(j),|}); $(avp(PrioP))=$(avp(Prio){s.select,$var(j),|}); $(avp(WgtP))=$(avp(Wgt){s.select,$var(j),|}); $(avp(CIncP))=$(avp(CInc){s.select,$var(j),|}); $(avp(WTotP))=$(avp(WTot){s.select,$var(j),|}); xlog("L_INFO"," Now Each time we have $(avp(NTgrpP)) $(avp(PrioP)) $(avp(WgtP)) $(avp(CIncP)) $(avp(WTotP))\n"); $var(j)=$var(j)+1; }
This then results in; INFO: <script>: Now Each time we have SB100_000223@1.2.3.4 1 10000
0 100000
INFO: <script>: Now Each time we have SB100_000225@1.2.3.5 1 10000
0 100000
INFO: <script>: Now Each time we have SB100_000386@1.2.3.6 1 80000
0 100000
INFO: <script>: Now Each time we have SB100_000213@1.2.3.7 2 30000
0 100000
INFO: <script>: Now Each time we have SB100_000361@1.2.3.8 2 70000
0 100000
Now what Id like to do is group them via priorities so I can do some further functional checks on them when in same priority group, as you can see there are 3 results at priority 1 and 2 at priority 2.
Is there away I can create something of a multi-array using the AVP $(avp(PrioP)) I just created so I can group by priority?
As in php I would do something like;
$multi_arr[$prio_arr[$p]][] = array( "ntgrp" => $ntgrp_arr[$p], "prio" => $prio_arr[$p], "wght" => $wght_arr[$p], "cinc" => $cinc_arr[$p], "wtot" => $wtot_arr[$p], ); }
Any help would be great.
Many thanks
Jon
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Alex Balashov | Principal | Evariste Systems LLC 303 Perimeter Center North, Suite 300 Atlanta, GA 30346 United States
Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Sorry Daniel, missed off list! Hi Daniel,Great thanks for that response, I have been working with AVPs and Im almost there.I will certainly check out the jansson module, is that new to 4.3 as Im currently on 4.2?In terms of AVPs, if you have an array structure in place, I appreciate it pushes entries up the stack, but can you set a specific index value to an AVP?As I basically want to move the first entry in the Array and move it to the end, ie I have;$(avp(Pgrp1)[0]);$(avp(Pgrp1)[1]);$(avp(Pgrp1)[2]);Can I swap [0] with [2] without setting entries to null and rebuilding the avp from scratch?ThanksJon To: sr-users@lists.sip-router.org From: miconda@gmail.com Date: Wed, 28 Oct 2015 15:39:15 +0100 Subject: Re: [SR-Users] Multi-Array with AVPs
Hello,
when adding an xavp structure, use:
$xavp(a=>b) = "...";
Now, adding another fieldx to the structure:
$xavp(a[0]=>c) = "...";
$xavp(a[0]=>d) = "...";
Pushing another new structure means starting from beginning:
$xavp(a=>b) = "...";
The previous structure will be available at index 1:
$xavp(a[1]=>b) = "...";
As alternative, maybe it is easier to return (or pack) all those attributes in a json document and then use jansson module to navigate through it via json-path mechanism.
Cheers,
Daniel
On 24/10/15 21:38, Jonathan Hunter wrote:
Hi Alex and guys,
Are there any further examples of XAVPs used in this manner?
So associate a number of variables by another variable?
I am trying with a number of scenarios but the penny is yet to drop!
Sorry!
Jon
From: hunterj91@hotmail.com
To: sr-users@lists.sip-router.org
Date: Fri, 23 Oct 2015 17:13:47 +0000
Subject: [SR-Users] Multi-Array with AVPs
Alex,
Thanks for the fast response!
I dont like hard mode, my lifes tough enough :)
Will try the XAVPs.
Thanks
Jon
> To: sr-users@lists.sip-router.org
> From: abalashov@evaristesys.com
> Date: Fri, 23 Oct 2015 13:07:27 -0400
> Subject: Re: [SR-Users] Multi-Array with AVPs
>
> Jon,
>
> For complex, nonscalar structures where members can be other AVP
> nonscalars, you might wish to consider XAVPs instead:
>
> http://www.kamailio.org/wiki/cookbooks/4.3.x/pseudovariables#xavp_id_-_xavps
>
> Otherwise, you're playing life on hard mode. ;-)
>
> -- Alex
>
> On 10/23/2015 01:00 PM, Jonathan Hunter wrote:
>
> > Hi Guys,
> >
> > Hope all are well?
> >
> > sorry to post but Im just trying to get something working where Im
> > trying to convert a php function script into the kamailio.cfg.
> >
> > Im getting there but wonder how I can group results of sets of avps with
> > another avp.
> >
> > Say I have these variables;
> >
> > $(avp(NTgrp)) =
> > 'SB100_000361@1.2.3.4|SB100_000213@1.2.3.5|SB100_000225@1.2.3.6|SB100_000361@1.2.3.7|SB100_000213@1.2.3.8';
> > $(avp(Prio)) = '1|1|1|2|2';
> > $(avp(Wgt)) = '10000|10000|80000|30000|70000';
> > $(avp(CInc)) = '0|0|1|0|1';
> > $(avp(WTot))= '100000|100000|100000|100000|100000';
> > I then run a while script to split up their variables via the delimiter
> > | in user;
> >
> > $var(j)=0;
> > while($var(j)<$var(count)) {
> > $(avp(NTgrpP))=$(avp(NTgrp){s.select,$var(j),|});
> > $(avp(PrioP))=$(avp(Prio){s.select,$var(j),|});
> > $(avp(WgtP))=$(avp(Wgt){s.select,$var(j),|});
> > $(avp(CIncP))=$(avp(CInc){s.select,$var(j),|});
> > $(avp(WTotP))=$(avp(WTot){s.select,$var(j),|});
> > xlog("L_INFO"," Now Each time we have $(avp(NTgrpP)) $(avp(PrioP))
> > $(avp(WgtP)) $(avp(CIncP)) $(avp(WTotP))\n");
> > $var(j)=$var(j)+1;
> > }
> >
> > This then results in;
> > INFO: <script>: Now Each time we have SB100_000223@1.2.3.4 1 10000 0 100000
> > INFO: <script>: Now Each time we have SB100_000225@1.2.3.5 1 10000 0 100000
> > INFO: <script>: Now Each time we have SB100_000386@1.2.3.6 1 80000 0 100000
> > INFO: <script>: Now Each time we have SB100_000213@1.2.3.7 2 30000 0 100000
> > INFO: <script>: Now Each time we have SB100_000361@1.2.3.8 2 70000 0 100000
> >
> > Now what Id like to do is group them via priorities so I can do some
> > further functional checks on them when in same priority group, as you
> > can see there are 3 results at priority 1 and 2 at priority 2.
> >
> > Is there away I can create something of a multi-array using the AVP
> > $(avp(PrioP)) I just created so I can group by priority?
> >
> > As in php I would do something like;
> >
> > $multi_arr[$prio_arr[$p]][] = array(
> > "ntgrp" => $ntgrp_arr[$p],
> > "prio" => $prio_arr[$p],
> > "wght" => $wght_arr[$p],
> > "cinc" => $cinc_arr[$p],
> > "wtot" => $wtot_arr[$p],
> > );
> > }
> >
> > Any help would be great.
> >
> > Many thanks
> >
> > Jon
> >
> >
> >
> > _______________________________________________
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> > sr-users@lists.sip-router.org
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> >
>
>
> --
> Alex Balashov | Principal | Evariste Systems LLC
> 303 Perimeter Center North, Suite 300
> Atlanta, GA 30346
> United States
>
> Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct)
> Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
On 29/10/15 09:40, Jonathan Hunter wrote:
Sorry Daniel, missed off list!
Hi Daniel,
Great thanks for that response, I have been working with AVPs and Im almost there.
I will certainly check out the jansson module, is that new to 4.3 as Im currently on 4.2?
iirc, is in 4.3, but probably works to just take the module and run it through 4.2 instance.
In terms of AVPs, if you have an array structure in place, I appreciate it pushes entries up the stack, but can you set a specific index value to an AVP?
You will need to do copy operations using different names if you use AVPs. If you use XAVPs, then you can set a value using index directly.
As I basically want to move the first entry in the Array and move it to the end, ie I have;
$(avp(Pgrp1)[0]); $(avp(Pgrp1)[1]); $(avp(Pgrp1)[2]);
Can I swap [0] with [2] without setting entries to null and rebuilding the avp from scratch?
Not with avp, but with xavp -- you can just add x in front of those avps in your config file.
Cheers, Daniel
Thanks
Jon
To: sr-users@lists.sip-router.org From: miconda@gmail.com Date: Wed, 28 Oct 2015 15:39:15 +0100 Subject: Re: [SR-Users] Multi-Array with AVPs
Hello,
when adding an xavp structure, use:
$xavp(a=>b) = "...";
Now, adding another fieldx to the structure:
$xavp(a[0]=>c) = "..."; $xavp(a[0]=>d) = "...";
Pushing another new structure means starting from beginning:
$xavp(a=>b) = "...";
The previous structure will be available at index 1:
$xavp(a[1]=>b) = "...";
As alternative, maybe it is easier to return (or pack) all those attributes in a json document and then use jansson module to navigate through it via json-path mechanism.
Cheers, Daniel
On 24/10/15 21:38, Jonathan Hunter wrote:
Hi Alex and guys, Are there any further examples of XAVPs used in this manner? So associate a number of variables by another variable? I am trying with a number of scenarios but the penny is yet to drop! Sorry! Jon From: hunterj91@hotmail.com <mailto:hunterj91@hotmail.com> To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> Date: Fri, 23 Oct 2015 17:13:47 +0000 Subject: [SR-Users] Multi-Array with AVPs Alex, Thanks for the fast response! I dont like hard mode, my lifes tough enough :) Will try the XAVPs. Thanks Jon > To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > From: abalashov@evaristesys.com <mailto:abalashov@evaristesys.com> > Date: Fri, 23 Oct 2015 13:07:27 -0400 > Subject: Re: [SR-Users] Multi-Array with AVPs > > Jon, > > For complex, nonscalar structures where members can be other AVP > nonscalars, you might wish to consider XAVPs instead: > > http://www.kamailio.org/wiki/cookbooks/4.3.x/pseudovariables#xavp_id_-_xavps > > Otherwise, you're playing life on hard mode. ;-) > > -- Alex > > On 10/23/2015 01:00 PM, Jonathan Hunter wrote: > > > Hi Guys, > > > > Hope all are well? > > > > sorry to post but Im just trying to get something working where Im > > trying to convert a php function script into the kamailio.cfg. > > > > Im getting there but wonder how I can group results of sets of avps with > > another avp. > > > > Say I have these variables; > > > > $(avp(NTgrp)) = > > 'SB100_000361@1.2.3.4 <mailto:SB100_000361@1.2.3.4>|SB100_000213@1.2.3.5 <mailto:SB100_000213@1.2.3.5>|SB100_000225@1.2.3.6 <mailto:SB100_000225@1.2.3.6>|SB100_000361@1.2.3.7 <mailto:SB100_000361@1.2.3.7>|SB100_000213@1.2.3.8 <mailto:SB100_000213@1.2.3.8>'; > > $(avp(Prio)) = '1|1|1|2|2'; > > $(avp(Wgt)) = '10000|10000|80000|30000|70000'; > > $(avp(CInc)) = '0|0|1|0|1'; > > $(avp(WTot))= '100000|100000|100000|100000|100000'; > > I then run a while script to split up their variables via the delimiter > > | in user; > > > > $var(j)=0; > > while($var(j)<$var(count)) { > > $(avp(NTgrpP))=$(avp(NTgrp){s.select,$var(j),|}); > > $(avp(PrioP))=$(avp(Prio){s.select,$var(j),|}); > > $(avp(WgtP))=$(avp(Wgt){s.select,$var(j),|}); > > $(avp(CIncP))=$(avp(CInc){s.select,$var(j),|}); > > $(avp(WTotP))=$(avp(WTot){s.select,$var(j),|}); > > xlog("L_INFO"," Now Each time we have $(avp(NTgrpP)) $(avp(PrioP)) > > $(avp(WgtP)) $(avp(CIncP)) $(avp(WTotP))\n"); > > $var(j)=$var(j)+1; > > } > > > > This then results in; > > INFO: <script>: Now Each time we have SB100_000223@1.2.3.4 <mailto:SB100_000223@1.2.3.4> 1 10000 0 100000 > > INFO: <script>: Now Each time we have SB100_000225@1.2.3.5 <mailto:SB100_000225@1.2.3.5> 1 10000 0 100000 > > INFO: <script>: Now Each time we have SB100_000386@1.2.3.6 <mailto:SB100_000386@1.2.3.6> 1 80000 0 100000 > > INFO: <script>: Now Each time we have SB100_000213@1.2.3.7 <mailto:SB100_000213@1.2.3.7> 2 30000 0 100000 > > INFO: <script>: Now Each time we have SB100_000361@1.2.3.8 <mailto:SB100_000361@1.2.3.8> 2 70000 0 100000 > > > > Now what Id like to do is group them via priorities so I can do some > > further functional checks on them when in same priority group, as you > > can see there are 3 results at priority 1 and 2 at priority 2. > > > > Is there away I can create something of a multi-array using the AVP > > $(avp(PrioP)) I just created so I can group by priority? > > > > As in php I would do something like; > > > > $multi_arr[$prio_arr[$p]][] = array( > > "ntgrp" => $ntgrp_arr[$p], > > "prio" => $prio_arr[$p], > > "wght" => $wght_arr[$p], > > "cinc" => $cinc_arr[$p], > > "wtot" => $wtot_arr[$p], > > ); > > } > > > > Any help would be great. > > > > Many thanks > > > > Jon > > > > > > > > _______________________________________________ > > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > > sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > > -- > Alex Balashov | Principal | Evariste Systems LLC > 303 Perimeter Center North, Suite 300 > Atlanta, GA 30346 > United States > > Tel: +1-800-250-5920 (toll-free) / +1-678-954-0671 (direct) > Web: http://www.evaristesys.com/, http://www.csrpswitch.com/ > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla http://twitter.com/#!/miconda http://twitter.com/#%21/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com Kamailio Advanced Training, Nov 30-Dec 2, Berlin - http://asipto.com/kat
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Alex Balashov -
Daniel-Constantin Mierla -
Jonathan Hunter