21 Jan
2019
21 Jan
'19
10:23 p.m.
Hi all,
Question. I'm executing uri_param() function to look for our customized
Request-URI parameters generated by our client. However, it keeps saying
the param is not there even though my client logs shows the param was
generated. Below is an example Request-URI from a test call I made:
sips:<some long string>@sjomainkamavip50.fuzemeeting.com:443;FN=
sjomainfn92.a.fuzemeeting.com;BR=sjomainfn91.a.fuzemeeting.com;AK=<some
key>;transport=wss"
And here is my line of code to check it:
if(uri_param("AK") ||uri_param("ak")) {
xlog("L_INFO", "[CSeq $cs] AK value
detected");
} else {
xlog("L_INFO", "[CSeq $cs] AK value not
detected. Aborting call");
drop();
}
Am I misusing this function somehow?
I'm running 5.1.2.
Thanks
Regards,
--
Andy Chen
--
*Confidentiality Notice: The information contained in this e-mail and any
attachments may be confidential. If you are not an intended recipient, you
are hereby notified that any dissemination, distribution or copying of this
e-mail is strictly prohibited. If you have received this e-mail in error,
please notify the sender and permanently delete the e-mail and any
attachments immediately. You should not retain, copy or use this e-mail or
any attachment for any purpose, nor disclose all or any part of the
contents to any other person. Thank you.*
21 Jan
21 Jan
10:28 p.m.
Andrew,
I believe per docs it finds a param with no value, so it may not match
if there is a value on that attribute.
On Mon, Jan 21, 2019 at 1:24 PM Andrew Chen <achen(a)fuze.com> wrote:
Hi all,
Question. I'm executing uri_param() function to look for our customized
Request-URI parameters generated by our client. However, it keeps saying
the param is not there even though my client logs shows the param was
generated. Below is an example Request-URI from a test call I made:
sips:<some long string>@sjomainkamavip50.fuzemeeting.com:443;FN=
sjomainfn92.a.fuzemeeting.com;BR=sjomainfn91.a.fuzemeeting.com;AK=<some
key>;transport=wss"
And here is my line of code to check it:
if(uri_param("AK") ||uri_param("ak")) {
xlog("L_INFO", "[CSeq $cs] AK value
detected");
} else {
xlog("L_INFO", "[CSeq $cs] AK value not
detected. Aborting call");
drop();
}
Am I misusing this function somehow?
I'm running 5.1.2.
Thanks
Regards,
--
Andy Chen
*Confidentiality Notice: The information contained in this e-mail and any
attachments may be confidential. If you are not an intended recipient, you
are hereby notified that any dissemination, distribution or copying of this
e-mail is strictly prohibited. If you have received this e-mail in error,
please notify the sender and permanently delete the e-mail and any
attachments immediately. You should not retain, copy or use this e-mail or
any attachment for any purpose, nor disclose all or any part of the
contents to any other person. Thank you.*
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
10:33 p.m.
Andrew,
Also - my brain is still waking up but -- I would make sure you are not
confusing inner param vs outer param, i.e.
<sips:foo@bar.com;inner=IN>;outer=OUT
- just another thought or common possibility I see happening, but given
that you are specifically stating request-uri this may not be applicable.
On Mon, Jan 21, 2019 at 1:28 PM Brandon Armstead <brandon(a)cryy.com> wrote:
Andrew,
I believe per docs it finds a param with no value, so it may not match
if there is a value on that attribute.
On Mon, Jan 21, 2019 at 1:24 PM Andrew Chen <achen(a)fuze.com> wrote:
Hi all,
Question. I'm executing uri_param() function to look for our customized
Request-URI parameters generated by our client. However, it keeps saying
the param is not there even though my client logs shows the param was
generated. Below is an example Request-URI from a test call I made:
sips:<some long string>@sjomainkamavip50.fuzemeeting.com:443;FN=
sjomainfn92.a.fuzemeeting.com;BR=sjomainfn91.a.fuzemeeting.com;AK=<some
key>;transport=wss"
And here is my line of code to check it:
if(uri_param("AK") ||uri_param("ak")) {
xlog("L_INFO", "[CSeq $cs] AK value
detected");
} else {
xlog("L_INFO", "[CSeq $cs] AK value not
detected. Aborting call");
drop();
}
Am I misusing this function somehow?
I'm running 5.1.2.
Thanks
Regards,
--
Andy Chen
*Confidentiality Notice: The information contained in this e-mail and any
attachments may be confidential. If you are not an intended recipient, you
are hereby notified that any dissemination, distribution or copying of
this
e-mail is strictly prohibited. If you have received this e-mail in error,
please notify the sender and permanently delete the e-mail and any
attachments immediately. You should not retain, copy or use this e-mail or
any attachment for any purpose, nor disclose all or any part of the
contents to any other person. Thank you.*
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
10:37 p.m.
Andrew,
Perhaps try something like this:
if(!($(ru{uri.param,ak}) == "")){
// ak has a value
} else {
// ak has no value
}
On Mon, Jan 21, 2019 at 1:28 PM Brandon Armstead <brandon(a)cryy.com> wrote:
Andrew,
I believe per docs it finds a param with no value, so it may not match
if there is a value on that attribute.
On Mon, Jan 21, 2019 at 1:24 PM Andrew Chen <achen(a)fuze.com> wrote:
Hi all,
Question. I'm executing uri_param() function to look for our customized
Request-URI parameters generated by our client. However, it keeps saying
the param is not there even though my client logs shows the param was
generated. Below is an example Request-URI from a test call I made:
sips:<some long string>@sjomainkamavip50.fuzemeeting.com:443;FN=
sjomainfn92.a.fuzemeeting.com;BR=sjomainfn91.a.fuzemeeting.com;AK=<some
key>;transport=wss"
And here is my line of code to check it:
if(uri_param("AK") ||uri_param("ak")) {
xlog("L_INFO", "[CSeq $cs] AK value
detected");
} else {
xlog("L_INFO", "[CSeq $cs] AK value not
detected. Aborting call");
drop();
}
Am I misusing this function somehow?
I'm running 5.1.2.
Thanks
Regards,
--
Andy Chen
*Confidentiality Notice: The information contained in this e-mail and any
attachments may be confidential. If you are not an intended recipient, you
are hereby notified that any dissemination, distribution or copying of
this
e-mail is strictly prohibited. If you have received this e-mail in error,
please notify the sender and permanently delete the e-mail and any
attachments immediately. You should not retain, copy or use this e-mail or
any attachment for any purpose, nor disclose all or any part of the
contents to any other person. Thank you.*
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
11:06 p.m.
Thanks Brandon for your responses. For some reason I misunderstood the use
of uri_param and thought that would just check if the param "ak" would
exist.
Yeah I did something like what you just mentioned except I'm not checking
for blank value, but checking to make sure the param exists.
if(uri =~ "(AK|ak)") {
...
}
On Mon, Jan 21, 2019 at 4:38 PM Brandon Armstead <brandon(a)cryy.com> wrote:
Andrew,
Perhaps try something like this:
if(!($(ru{uri.param,ak}) == "")){
// ak has a value
} else {
// ak has no value
}
On Mon, Jan 21, 2019 at 1:28 PM Brandon Armstead <brandon(a)cryy.com> wrote:
--
Andy Chen
Sr. Telephony Lead Engineer
415 516 5535 (M)
achen@ <achen(a)thinkingphones.com>fuze.com
--
*Confidentiality Notice: The information contained in this e-mail and any
attachments may be confidential. If you are not an intended recipient, you
are hereby notified that any dissemination, distribution or copying of this
e-mail is strictly prohibited. If you have received this e-mail in error,
please notify the sender and permanently delete the e-mail and any
attachments immediately. You should not retain, copy or use this e-mail or
any attachment for any purpose, nor disclose all or any part of the
contents to any other person. Thank you.*
Andrew,
I believe per docs it finds a param with no value, so it may not match
if there is a value on that attribute.
On Mon, Jan 21, 2019 at 1:24 PM Andrew Chen <achen(a)fuze.com> wrote:
Kamailio (SER) - Users
Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi all,
Question. I'm executing uri_param() function to look for our customized
Request-URI parameters generated by our client. However, it keeps saying
the param is not there even though my client logs shows the param was
generated. Below is an example Request-URI from a test call I made:
sips:<some long string>@sjomainkamavip50.fuzemeeting.com:443;FN=
sjomainfn92.a.fuzemeeting.com;BR=sjomainfn91.a.fuzemeeting.com;AK=<some
key>;transport=wss"
And here is my line of code to check it:
if(uri_param("AK") ||uri_param("ak")) {
xlog("L_INFO", "[CSeq $cs] AK value
detected");
} else {
xlog("L_INFO", "[CSeq $cs] AK value not
detected. Aborting call");
drop();
}
Am I misusing this function somehow?
I'm running 5.1.2.
Thanks
Regards,
--
Andy Chen
*Confidentiality Notice: The information contained in this e-mail and any
attachments may be confidential. If you are not an intended recipient,
you
are hereby notified that any dissemination, distribution or copying of
this
e-mail is strictly prohibited. If you have received this e-mail in error,
please notify the sender and permanently delete the e-mail and any
attachments immediately. You should not retain, copy or use this e-mail
or
any attachment for any purpose, nor disclose all or any part of the
contents to any other person. Thank you.*
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
1928
days inactive
1928
days old
4 comments
2 participants
participants (2)
-
Andrew Chen -
Brandon Armstead