Hello,
One hint more - Thanks! Now I've put modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock")
... but the same error. The file /var/run/rtpproxy.sock exists
----- Original Message ----- From: "maka" icokan@gmail.com To: "Sebastian Kühner" skuehner@veraza.com Sent: Wednesday, July 20, 2005 11:31 AM Subject: Re: [Serusers] rtp proxy
hya,
have you tried adding
modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock")
to your ser.cfg?
On 7/20/05, Sebastian Kühner skuehner@veraza.com wrote:
Hi!
Yes, I started rtpproxy with "rtpproxy" in the command line. (it's in /usr/local/bin)
Sorry, I should have sent you the ser config:
# ------------- nat helper parameters #We will you flag 6 to mark NATed contacts modparam("registrar", "nat_flag", 6)
# Enable NAT pinging modparam("nathelper", "natping_interval", 60)
# Ping only contacts that are known to be # behind NAT modparam("nathelper", "ping_nated_only", 1)
... and at the beginning of the routing:
# special handling for NATed clients; first, nat test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding used); also, # the received test should, if complete, should check all # vias for presence of received if (nat_uac_test("3")) { # allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP,
rewriting\n");
# This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart smart enough to be symmetric. In some phones, like # it takes a configuration option. With Cisco 7960, it is # called NAT_Enable=Yes, with kphone it is called # "symmetric media" and "symmetric signaling". (The latter # not part of public released yet.) fix_nated_contact(); # Rewrite contact with source IP of
signalling
if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed };};
... and at the "end":
if (isflagset(6)) { force_rtp_proxy(); t_on_reply("1"); append_hf("P-Behind-NAT: Yes\r\n"); };
if (!t_relay()) { sl_reply_error(); break; };
onreply_route[1] { if (status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); }; }
Thanks for your help!
Sebastian
----- Original Message ----- From: "harry gaillac" gaillacharry@yahoo.fr To: "Sebastian Kühner" skuehner@veraza.com Sent: Wednesday, July 20, 2005 11:06 AM Subject: Re: [Serusers] rtp proxy
which params do you set in ser.cfg for nathelper do you start rtpproxy?
harry --- Sebastian Kühner skuehner@veraza.com a écrit :
Hi!
Sorry, but I didn't find anything about "compiling" and "nathelper". Where can I find that? I looked at the iptel webpage and in the README of the module.
Has anyone experiences with nathelper, ser-0.9.0 and rtpproxy? I get the same error messages...
ERROR: send_rtpp_command: can't connect to RTP proxy WARNING: rtpp_test: can't get version of the RTP proxy
I compiled it like this: ./configure make make install
Thanks!
Sebastian
----- Original Message ----- From: "harry gaillac" gaillacharry@yahoo.fr To: "Sebastian Kühner" skuehner@veraza.com Sent: Wednesday, July 20, 2005 10:45 AM Subject: Re: [Serusers] rtp proxy
look at
http://developer.berlios.de/cvs/?group_id=480
cvs
-d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser
login cvs -z3
-d:pserver:anonymous@cvs.ser.berlios.de:/cvsroot/ser
co rtpproxy
Read nathelper module and rtpproxy code before compiling !
You won't find good docs -:(
Harry
--- Sebastian Kühner skuehner@veraza.com a écrit
:
Thanks for your answer!
How can I download them? Do I have to click to
all
that files now to download?
----- Original Message ----- From: "harry gaillac" gaillacharry@yahoo.fr To: "Sebastian Kühner" skuehner@veraza.com Sent: Wednesday, July 20, 2005 10:21 AM Subject: RE: [Serusers] rtp proxy
hello,
Look here for the latest rtpproxy :
http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/rtpproxy/
Check config for nathelper module
harry --- Sebastian Kühner skuehner@veraza.com a
écrit
:
> Hi all, > > I want to implement a rtpproxy, but after > installation and implementation in > ser I get the follwing error messages: > > ERROR: send_rtpp_command: can't connect to
RTP
proxy
> 18(5422) WARNING: rtpp_test: can't get
version
of
> the RTP proxy > 18(5422) WARNING: rtpp_test: support for RTP > proxyhas been disabled > temporarily > 19(5423) ERROR: send_rtpp_command: can't
connect
to
> RTP proxy > 19(5423) WARNING: rtpp_test: can't get
version
of
> the RTP proxy > 19(5423) WARNING: rtpp_test: support for RTP > proxyhas been disabled > temporarily > 0(5378) ERROR: send_rtpp_command: can't
connect
to
> RTP proxy > 0(5378) WARNING: rtpp_test: can't get
version
of
> the RTP proxy > 0(5378) WARNING: rtpp_test: support for RTP > proxyhas been disabled > temporarily > > Where can I get the newest rtpproxy (for ser
0.9.0)?
> I wanted to enter at > the ftp-site of iptel, but I think it's
down.
> > Thanks! > > Sebastian > > >
> Serusers mailing list > serusers@lists.iptel.org >
http://lists.iptel.org/mailman/listinfo/serusers
>
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec
le
nouveau Yahoo! Messenger
Téléchargez cette version sur
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le
nouveau Yahoo! Messenger
Téléchargez cette version sur
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo!
Messenger
Téléchargez cette version sur http://fr.messenger.yahoo.com
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Sebastian Kühner