Thanks for ur answer,
Well, the problem is, that in "location" always appears
"(a)200.52.29.189" (IP changed ;-)... which isn't the local IP-Address... so
it doesn't work.
Sebastian
Iqbal <iqbal(a)gigo.co.uk> schrieb am 28.04.05 20:09:01:
sip orxy settings, should be your sip server, then call will go through
there, it will use the location entries to see what other sip phone has
been connected and then send to that IP address
Iqbal
Sebastian Kühner wrote:
>Hello,
>
>I'm new here... and I have question very simple (I hope).
>
>I have a local network. Ser is running on 192.168.1.223 and I have two Softphones
connectes with ser (192.168.1.100 and 192.168.1.51). There is no problem to call the
Softphones like <user1>(a)192.168.1.100 or <user2>(a)192.168.1.51 ... using their
IP-Addresses.
>
>But I want to call the users like this: <user1>(a)192.168.1.223 or
<user2>(a)192.168.1.223 ... using the IP-Address of the Sip Express Router.
>
>What do I have to put to my ser.cfg file????
>
>Thanks!!!
>
>Sebastian
>______________________________________________________________
>Verschicken Sie romantische, coole und witzige Bilder per SMS!
>Jetzt bei WEB.DE FreeMail:
http://f.web.de/?mc=021193
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>.
>
>
>
_______________________________________________________________
Fruhlings-Aktion: Gratis DSL-Modems zur freien Auswahl
Nur bis 30. April bei WEB.DE DSL!
https://dsl.web.de/?mc=021193