19 Feb
2019
19 Feb
'19
9:27 a.m.
Can you check via rpc and looking at database tables if dialog record is
there?
Cheers,
Daniel
On Tue, 19 Feb 2019, 08:44 <jenus(a)cyberchaos.nl wrote:
Daniel,
Yes the uac_replace_from is called from a branch route.
Jan
Daniel-Constantin Mierla schreef op 2019-02-19 08:26:
I do not recall any relevant changes recently in
this part of the code,
so likely to be same result for 5.2.
With restore_dlg set to 1, dialog variables are used for storing the
headers. When do you call uac_replace_from()/_to()? Is it in a
branch_route?
Cheers,
Daniel
On 19.02.19 08:07, jenus(a)cyberchaos.nl wrote:
Forgot to mention, i'm running kamailio
5.1.7, did not test yet with
the latest 5.2 release.
Jan
jenus(a)cyberchaos.nl schreef op 2019-02-18 15:22:
> Hello,
>
> I'm running into a issue with restore_mode auto when i enable
> restore_dlg in the uac module. I have a feature where i reroute calls
> for a subscriber when it is offline. When routing calls to the
> subscriber i check the exit status of "lookup("location")" and
> re-route the call. This works fine. It seems to fail when i hit the
> failure route (subscriber has a usrloc entry but does not respond).
> In
> the failure route i append_branch and reroute the call.
>
> The rerouting works fine, but when i receive the ACK on the 200OK on
> the re-routed call the "restore" feature seems to fail and i end up
> with a header like:
>
> To:
> <sip:+<null>@voip-dev.domain.nl
;tag=5B8ABC8A-5C6ABE83000EBF35-AB202700
>> in the ACK.
>>
>> If i disable restore_dlg feature from the UAC module it adds the
>> vsf/vst to the Record-Route header and all works fine.
>>
>> Do i need to do something special when i create a new branch and use
>> the restore_dlg feature?
>>
>>
>> Thanks,
>>
>> Jan Hazenberg
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users 
19 Feb
19 Feb
10:09 a.m.
New subject: Issue with UAC restore_mode when restore_dlg is enabled
Just chekked this, dialog records are created for the call.
Jan
Daniel-Constantin Mierla schreef op 2019-02-19 09:27:
Can you check via rpc and looking at database tables
if dialog record
is there?
Cheers,
Daniel
On Tue, 19 Feb 2019, 08:44 <jenus(a)cyberchaos.nl wrote:
Daniel,
Yes the uac_replace_from is called from a branch route.
Jan
Daniel-Constantin Mierla schreef op 2019-02-19 08:26:
Links:
------
[1] http://voip-dev.domain.nl I do not recall any relevant changes recently in
this part of the
code,
so likely to be same result for 5.2.
With restore_dlg set to 1, dialog variables are used for storing
the
headers. When do you call
uac_replace_from()/_to()? Is it in a
branch_route?
Cheers,
Daniel
On 19.02.19 08:07, jenus(a)cyberchaos.nl wrote:
> Forgot to mention, i'm running kamailio 5.1.7, did not test yet
with
> the latest 5.2 release.
>
> Jan
>
>
> jenus(a)cyberchaos.nl schreef op 2019-02-18 15:22:
>> Hello,
>>
>> I'm running into a issue with restore_mode auto when i enable
>> restore_dlg in the uac module. I have a feature where i reroute
calls
>> for a subscriber when it is offline. When
routing calls to the
>> subscriber i check the exit status of "lookup("location")"
and
>> re-route the call. This works fine. It seems to fail when i hit
the
>> failure route (subscriber has a usrloc
entry but does not
respond).
>> In
>> the failure route i append_branch and reroute the call.
>>
>> The rerouting works fine, but when i receive the ACK on the
200OK on
>> the re-routed call the
"restore" feature seems to fail and i end
up
>> with a header like:
>>
>> To:
>> <sip:+<null>@voip-dev.domain.nl
[1]>;tag=5B8ABC8A-5C6ABE83000EBF35-AB202700
>> in the ACK.
>>
>> If i disable restore_dlg feature from the UAC module it adds the
>> vsf/vst to the Record-Route header and all works fine.
>>
>> Do i need to do something special when i create a new branch and
use
>>> the restore_dlg feature?
>>>
>>>
>>> Thanks,
>>>
>>> Jan Hazenberg
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users(a)lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
10:17 a.m.
New subject: Issue with UAC restore_mode when restore_dlg is enabled
And the _uac_to and _uac_fu seem to contain the correct data. But in the
_uac_tonew i see the <null> value.
_uac_tonew: sip:+<null>@voip-dev.domain.nl
}
{
_uac_funew: sip:KPNtest1@voip-dev.domain.nl
}
{
Jan
Daniel-Constantin Mierla schreef op 2019-02-19 09:27:
Can you check via rpc and looking at database tables
if dialog record
is there?
Cheers,
Daniel
On Tue, 19 Feb 2019, 08:44 <jenus(a)cyberchaos.nl wrote:
Daniel,
Yes the uac_replace_from is called from a branch route.
Jan
Daniel-Constantin Mierla schreef op 2019-02-19 08:26:
Links:
------
[1] http://voip-dev.domain.nl I do not recall any relevant changes recently in
this part of the
code,
so likely to be same result for 5.2.
With restore_dlg set to 1, dialog variables are used for storing
the
headers. When do you call
uac_replace_from()/_to()? Is it in a
branch_route?
Cheers,
Daniel
On 19.02.19 08:07, jenus(a)cyberchaos.nl wrote:
> Forgot to mention, i'm running kamailio 5.1.7, did not test yet
with
> the latest 5.2 release.
>
> Jan
>
>
> jenus(a)cyberchaos.nl schreef op 2019-02-18 15:22:
>> Hello,
>>
>> I'm running into a issue with restore_mode auto when i enable
>> restore_dlg in the uac module. I have a feature where i reroute
calls
>> for a subscriber when it is offline. When
routing calls to the
>> subscriber i check the exit status of "lookup("location")"
and
>> re-route the call. This works fine. It seems to fail when i hit
the
>> failure route (subscriber has a usrloc
entry but does not
respond).
>> In
>> the failure route i append_branch and reroute the call.
>>
>> The rerouting works fine, but when i receive the ACK on the
200OK on
>> the re-routed call the
"restore" feature seems to fail and i end
up
>> with a header like:
>>
>> To:
>> <sip:+<null>@voip-dev.domain.nl
[1]>;tag=5B8ABC8A-5C6ABE83000EBF35-AB202700
>> in the ACK.
>>
>> If i disable restore_dlg feature from the UAC module it adds the
>> vsf/vst to the Record-Route header and all works fine.
>>
>> Do i need to do something special when i create a new branch and
use
>>> the restore_dlg feature?
>>>
>>>
>>> Thanks,
>>>
>>> Jan Hazenberg
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users(a)lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1899
days inactive
1899
days old
2 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
jenus＠cyberchaos.nl