29 Jun
2022
29 Jun
'22
5:24 a.m.
Hello,
I have kamailio in local network behind NAT. Kamailio have one interface
eth1 with ip 10.130.0.23
UserAgent - (internet) - (178.0.0.169)router_with_NAT - (LAN) -
kamailio+rtpproxy - pbx
I made two listeners:
listen=udp:10.130.0.23:5070 #to pbx in lan (I don`t want to put via header
with 178.0.0.169)
listen=udp:10.130.0.23:5060 advertise 178.0.0.169:5060 #to internet
(UserAgent need to get via header with 178.0.0.169 )
mhomed = 1 # I think It not useful for my case
UserAgent send Register and Invite to 178.0.0.169:5060, Kamailio get it on
udp:10.130.0.23:5060
Kamailio Relay it to udp:10.130.0.23:5070
My pbx get requests from udp:10.130.0.23:5070 with via header 10.130.0.23
Responses to UserAgent go from udp:10.130.0.23:5060 with via 178.0.0.169
In RELAY block:
if ($Ru == «udp:10.130.0.23:5070») {
#set_send_socket(«udp:10.130.0.23:5060»);
$fs = «udp:10.130.0.23:5060»;
#force_send_socket(«udp:10.130.0.23:5060»);
} else {
#set_send_socket(«udp:10.130.0.23:5070»);
$fs = «udp:10.130.0.23:5070»;
}
#$fs = «udp:10.130.0.23:5070»;
if (!t_relay()) {
sl_reply_error();
}
route[REGISTRAR] {
if ($rd == "mydomain.ru" || $rd == "mydomain2.ru") {
set_send_socket("udp:10.130.0.23:5070");
}
}
It works for requests from UserAgent to PBX. But INVITE from my pbx to
UserAgent goes only through udp:10.130.0.23:5070 , Kamailio realy it to
internet from udp:10.130.0.23:5070
I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper():
error accessing branch [0])
I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs =
«udp:10.130.0.23:5070»;
Why I can`t relay outgoing requests to internet through another socket?
--
Best regards,
Alex
11:50 a.m.
I use this with NATed Kamailio and Asterisk for "transparent" registrations:
if (is_method("REGISTER")) {
add_path();
}
if ($Ri=="LAN_IP") {
$fs="udp:WAN_IP:5060";
} else {
$fs="udp:LAN_IP:5060";
}
AFAIK FreeSwitch supports Path as well but Yate doesn't
ср, 29 июн. 2022 г. в 12:25, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
Hello,
I have kamailio in local network behind NAT. Kamailio have one interface
eth1 with ip 10.130.0.23
UserAgent - (internet) - (178.0.0.169)router_with_NAT - (LAN) -
kamailio+rtpproxy - pbx
I made two listeners:
listen=udp:10.130.0.23:5070 #to pbx in lan (I don`t want to put via
header with 178.0.0.169)
listen=udp:10.130.0.23:5060 advertise 178.0.0.169:5060 #to internet
(UserAgent need to get via header with 178.0.0.169 )
mhomed = 1 # I think It not useful for my case
UserAgent send Register and Invite to 178.0.0.169:5060, Kamailio get it
on udp:10.130.0.23:5060
Kamailio Relay it to udp:10.130.0.23:5070
My pbx get requests from udp:10.130.0.23:5070 with via header 10.130.0.23
Responses to UserAgent go from udp:10.130.0.23:5060 with via 178.0.0.169
In RELAY block:
if ($Ru == «udp:10.130.0.23:5070») {
#set_send_socket(«udp:10.130.0.23:5060»);
$fs = «udp:10.130.0.23:5060»;
#force_send_socket(«udp:10.130.0.23:5060»);
} else {
#set_send_socket(«udp:10.130.0.23:5070»);
$fs = «udp:10.130.0.23:5070»;
}
#$fs = «udp:10.130.0.23:5070»;
if (!t_relay()) {
sl_reply_error();
}
route[REGISTRAR] {
if ($rd == "mydomain.ru" || $rd == "mydomain2.ru") {
set_send_socket("udp:10.130.0.23:5070");
}
}
It works for requests from UserAgent to PBX. But INVITE from my pbx to
UserAgent goes only through udp:10.130.0.23:5070 , Kamailio realy it to
internet from udp:10.130.0.23:5070
I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper():
error accessing branch [0])
I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs =
«udp:10.130.0.23:5070»;
Why I can`t relay outgoing requests to internet through another socket?
--
Best regards,
Alex
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1 Jul
1 Jul
8:17 a.m.
Hello,
Are you ips (LAN_IP and WAN_IP) on sepparate interfaces?
I use add_path for Register requests. It insert header Path:
<sip:10.130.0.23:5070;lr>
My pbx calls to User-Agent throught 10.130.0.23:5070. INVITE(from kamailio)
go out to internet from 10.130.0.23:5070
This line "$fs = «udp:10.130.0.23:5060»;" don`t work, It produces an error:
(pv [pv_branch.c:62]: pv_get_branchx_helper(): error accessing branch [0])
ср, 29 июн. 2022 г. в 18:55, ZZ Wave <zzwave(a)gmail.com>om>:
I use this with NATed Kamailio and Asterisk for
"transparent"
registrations:
if (is_method("REGISTER")) {
add_path();
}
if ($Ri=="LAN_IP") {
$fs="udp:WAN_IP:5060";
} else {
$fs="udp:LAN_IP:5060";
}
AFAIK FreeSwitch supports Path as well but Yate doesn't
ср, 29 июн. 2022 г. в 12:25, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
--
С уважением,
Якимкин Алексей
Hello,
I have kamailio in local network behind NAT. Kamailio have one interface
eth1 with ip 10.130.0.23
UserAgent - (internet) - (178.0.0.169)router_with_NAT - (LAN) -
kamailio+rtpproxy - pbx
I made two listeners:
listen=udp:10.130.0.23:5070 #to pbx in lan (I don`t want to put via
header with 178.0.0.169)
listen=udp:10.130.0.23:5060 advertise 178.0.0.169:5060 #to internet
(UserAgent need to get via header with 178.0.0.169 )
mhomed = 1 # I think It not useful for my case
UserAgent send Register and Invite to 178.0.0.169:5060, Kamailio get it
on udp:10.130.0.23:5060
Kamailio Relay it to udp:10.130.0.23:5070
My pbx get requests from udp:10.130.0.23:5070 with via header
10.130.0.23
Responses to UserAgent go from udp:10.130.0.23:5060 with via 178.0.0.169
In RELAY block:
if ($Ru == «udp:10.130.0.23:5070») {
#set_send_socket(«udp:10.130.0.23:5060»);
$fs = «udp:10.130.0.23:5060»;
#force_send_socket(«udp:10.130.0.23:5060»);
} else {
#set_send_socket(«udp:10.130.0.23:5070»);
$fs = «udp:10.130.0.23:5070»;
}
#$fs = «udp:10.130.0.23:5070»;
if (!t_relay()) {
sl_reply_error();
}
route[REGISTRAR] {
if ($rd == "mydomain.ru" || $rd == "mydomain2.ru") {
set_send_socket("udp:10.130.0.23:5070");
}
}
It works for requests from UserAgent to PBX. But INVITE from my pbx to
UserAgent goes only through udp:10.130.0.23:5070 , Kamailio realy it to
internet from udp:10.130.0.23:5070
I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper():
error accessing branch [0])
I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs =
«udp:10.130.0.23:5070»;
Why I can`t relay outgoing requests to internet through another socket?
--
Best regards,
Alex
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8 Jul
8 Jul
8:31 a.m.
I`ve solved this issue. The condition if ($Ru == «*udp*:10.130.0.23:5070»)
was wrong.
Here is the correct code:
if ($Ru eq "sip:10.130.0.23:5070") {
$fs = "udp:10.130.0.23:5060";
} else {
$fs = "udp:10.130.0.23:5070";
}
пт, 1 июл. 2022 г. в 15:17, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
Hello,
Are you ips (LAN_IP and WAN_IP) on sepparate interfaces?
I use add_path for Register requests. It insert header Path:
<sip:10.130.0.23:5070;lr>
My pbx calls to User-Agent throught 10.130.0.23:5070. INVITE(from
kamailio) go out to internet from 10.130.0.23:5070
This line "$fs = «udp:10.130.0.23:5060»;" don`t work, It produces an
error:
(pv [pv_branch.c:62]: pv_get_branchx_helper(): error accessing branch [0])
ср, 29 июн. 2022 г. в 18:55, ZZ Wave <zzwave(a)gmail.com>om>:
--
С уважением,
Якимкин Алексей
I use this with NATed Kamailio and Asterisk for
"transparent"
registrations:
if (is_method("REGISTER")) {
add_path();
}
if ($Ri=="LAN_IP") {
$fs="udp:WAN_IP:5060";
} else {
$fs="udp:LAN_IP:5060";
}
AFAIK FreeSwitch supports Path as well but Yate doesn't
ср, 29 июн. 2022 г. в 12:25, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
--
С уважением,
Якимкин Алексей
Hello,
I have kamailio in local network behind NAT. Kamailio have one
interface eth1 with ip 10.130.0.23
UserAgent - (internet) - (178.0.0.169)router_with_NAT - (LAN) -
kamailio+rtpproxy - pbx
I made two listeners:
listen=udp:10.130.0.23:5070 #to pbx in lan (I don`t want to put via
header with 178.0.0.169)
listen=udp:10.130.0.23:5060 advertise 178.0.0.169:5060 #to internet
(UserAgent need to get via header with 178.0.0.169 )
mhomed = 1 # I think It not useful for my case
UserAgent send Register and Invite to 178.0.0.169:5060, Kamailio get it
on udp:10.130.0.23:5060
Kamailio Relay it to udp:10.130.0.23:5070
My pbx get requests from udp:10.130.0.23:5070 with via header
10.130.0.23
Responses to UserAgent go from udp:10.130.0.23:5060 with
via 178.0.0.169
In RELAY block:
if ($Ru == «udp:10.130.0.23:5070») {
#set_send_socket(«udp:10.130.0.23:5060»);
$fs = «udp:10.130.0.23:5060»;
#force_send_socket(«udp:10.130.0.23:5060»);
} else {
#set_send_socket(«udp:10.130.0.23:5070»);
$fs = «udp:10.130.0.23:5070»;
}
#$fs = «udp:10.130.0.23:5070»;
if (!t_relay()) {
sl_reply_error();
}
route[REGISTRAR] {
if ($rd == "mydomain.ru" || $rd == "mydomain2.ru") {
set_send_socket("udp:10.130.0.23:5070");
}
}
It works for requests from UserAgent to PBX. But INVITE from my pbx to
UserAgent goes only through udp:10.130.0.23:5070 , Kamailio realy it
to internet from udp:10.130.0.23:5070
I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper():
error accessing branch [0])
I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs =
«udp:10.130.0.23:5070»;
Why I can`t relay outgoing requests to internet through another socket?
--
Best regards,
Alex
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
29 Jul
29 Jul
12:15 p.m.
Yes they're on separate i/f each, Kamailio works like SIP "NAT/firewall
box" between LAN and internet.
Check a port in $fs, 5060 or 5070, or show your cfg with $fs
пт, 1 июл. 2022 г. в 15:19, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
Hello,
Are you ips (LAN_IP and WAN_IP) on sepparate interfaces?
I use add_path for Register requests. It insert header Path:
<sip:10.130.0.23:5070;lr>
My pbx calls to User-Agent throught 10.130.0.23:5070. INVITE(from
kamailio) go out to internet from 10.130.0.23:5070
This line "$fs = «udp:10.130.0.23:5060»;" don`t work, It produces an
error:
(pv [pv_branch.c:62]: pv_get_branchx_helper(): error accessing branch [0])
ср, 29 июн. 2022 г. в 18:55, ZZ Wave <zzwave(a)gmail.com>om>:
I use this with NATed Kamailio and Asterisk for
"transparent"
registrations:
if (is_method("REGISTER")) {
add_path();
}
if ($Ri=="LAN_IP") {
$fs="udp:WAN_IP:5060";
} else {
$fs="udp:LAN_IP:5060";
}
AFAIK FreeSwitch supports Path as well but Yate doesn't
ср, 29 июн. 2022 г. в 12:25, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
--
С уважением,
Якимкин Алексей
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello,
I have kamailio in local network behind NAT. Kamailio have one
interface eth1 with ip 10.130.0.23
UserAgent - (internet) - (178.0.0.169)router_with_NAT - (LAN) -
kamailio+rtpproxy - pbx
I made two listeners:
listen=udp:10.130.0.23:5070 #to pbx in lan (I don`t want to put via
header with 178.0.0.169)
listen=udp:10.130.0.23:5060 advertise 178.0.0.169:5060 #to internet
(UserAgent need to get via header with 178.0.0.169 )
mhomed = 1 # I think It not useful for my case
UserAgent send Register and Invite to 178.0.0.169:5060, Kamailio get it
on udp:10.130.0.23:5060
Kamailio Relay it to udp:10.130.0.23:5070
My pbx get requests from udp:10.130.0.23:5070 with via header
10.130.0.23
Responses to UserAgent go from udp:10.130.0.23:5060 with
via 178.0.0.169
In RELAY block:
if ($Ru == «udp:10.130.0.23:5070») {
#set_send_socket(«udp:10.130.0.23:5060»);
$fs = «udp:10.130.0.23:5060»;
#force_send_socket(«udp:10.130.0.23:5060»);
} else {
#set_send_socket(«udp:10.130.0.23:5070»);
$fs = «udp:10.130.0.23:5070»;
}
#$fs = «udp:10.130.0.23:5070»;
if (!t_relay()) {
sl_reply_error();
}
route[REGISTRAR] {
if ($rd == "mydomain.ru" || $rd == "mydomain2.ru") {
set_send_socket("udp:10.130.0.23:5070");
}
}
It works for requests from UserAgent to PBX. But INVITE from my pbx to
UserAgent goes only through udp:10.130.0.23:5070 , Kamailio realy it
to internet from udp:10.130.0.23:5070
I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper():
error accessing branch [0])
I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs =
«udp:10.130.0.23:5070»;
Why I can`t relay outgoing requests to internet through another socket?
--
Best regards,
Alex
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
12:16 p.m.
Grats :)
пт, 8 июл. 2022 г. в 15:33, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
I`ve solved this issue. The condition if ($Ru ==
«*udp*:10.130.0.23:5070»)
was wrong.
Here is the correct code:
if ($Ru eq "sip:10.130.0.23:5070") {
$fs = "udp:10.130.0.23:5060";
} else {
$fs = "udp:10.130.0.23:5070";
}
пт, 1 июл. 2022 г. в 15:17, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
Hello,
Are you ips (LAN_IP and WAN_IP) on sepparate interfaces?
I use add_path for Register requests. It insert header Path:
<sip:10.130.0.23:5070;lr>
My pbx calls to User-Agent throught 10.130.0.23:5070. INVITE(from
kamailio) go out to internet from 10.130.0.23:5070
This line "$fs = «udp:10.130.0.23:5060»;" don`t work, It produces an
error:
(pv [pv_branch.c:62]: pv_get_branchx_helper(): error accessing branch [0])
ср, 29 июн. 2022 г. в 18:55, ZZ Wave <zzwave(a)gmail.com>om>:
--
С уважением,
Якимкин Алексей
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
I use this with NATed Kamailio and Asterisk for
"transparent"
registrations:
if (is_method("REGISTER")) {
add_path();
}
if ($Ri=="LAN_IP") {
$fs="udp:WAN_IP:5060";
} else {
$fs="udp:LAN_IP:5060";
}
AFAIK FreeSwitch supports Path as well but Yate doesn't
ср, 29 июн. 2022 г. в 12:25, Алексей Якимкин <ayakimkin(a)gmail.com>om>:
--
С уважением,
Якимкин Алексей
Hello,
I have kamailio in local network behind NAT. Kamailio have one
interface eth1 with ip 10.130.0.23
UserAgent - (internet) - (178.0.0.169)router_with_NAT - (LAN) -
kamailio+rtpproxy - pbx
I made two listeners:
listen=udp:10.130.0.23:5070 #to pbx in lan (I don`t want to put via
header with 178.0.0.169)
listen=udp:10.130.0.23:5060 advertise 178.0.0.169:5060 #to internet
(UserAgent need to get via header with 178.0.0.169 )
mhomed = 1 # I think It not useful for my case
UserAgent send Register and Invite to 178.0.0.169:5060, Kamailio get
it on udp:10.130.0.23:5060
Kamailio Relay it to udp:10.130.0.23:5070
My pbx get requests from udp:10.130.0.23:5070 with via header
10.130.0.23
Responses to UserAgent go from udp:10.130.0.23:5060 with
via 178.0.0.169
In RELAY block:
if ($Ru == «udp:10.130.0.23:5070») {
#set_send_socket(«udp:10.130.0.23:5060»);
$fs = «udp:10.130.0.23:5060»;
#force_send_socket(«udp:10.130.0.23:5060»);
} else {
#set_send_socket(«udp:10.130.0.23:5070»);
$fs = «udp:10.130.0.23:5070»;
}
#$fs = «udp:10.130.0.23:5070»;
if (!t_relay()) {
sl_reply_error();
}
route[REGISTRAR] {
if ($rd == "mydomain.ru" || $rd == "mydomain2.ru") {
set_send_socket("udp:10.130.0.23:5070");
}
}
It works for requests from UserAgent to PBX. But INVITE from my pbx to
UserAgent goes only through udp:10.130.0.23:5070 , Kamailio realy it
to internet from udp:10.130.0.23:5070
I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper():
error accessing branch [0])
I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs =
«udp:10.130.0.23:5070»;
Why I can`t relay outgoing requests to internet through another socket?
--
Best regards,
Alex
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only
to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
641
days inactive
671
days old
6 comments
3 participants
participants (3)
-
M S -
ZZ Wave -
Алексей Якимкин