Hi, two small questions this time :-)
1.) From 1.2.x modules dok, default rpid_avp for auth is: modparam("auth", "rpid_avp", "$avp(s:rpid)")
However setting this gives a failure:
parse_avp_name: error - use type (s: or i:) in front of avp name Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:init_rpid_avp: invalid rpid AVP specs "$avp(s:rpid)" Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:mod_init: failed to process rpid AVPs Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: init_mod(): Error while initializing module auth
The "old" way still works: modparam("auth","rpid_avp","s:rpid")
2.) Earlier I had modparam("tm","fr_inv_timer_avp","s:inv_timeout")
and: avp_db_load("$tu",s:inv_timeout) [inv_timeout attribute in database]
What would be the equivalent with the new avp configuration?
br hw
Hello,
On 03/08/07 22:39, Helge Waastad wrote:
Hi, two small questions this time :-)
1.) From 1.2.x modules dok, default rpid_avp for auth is: modparam("auth", "rpid_avp", "$avp(s:rpid)")
However setting this gives a failure:
parse_avp_name: error - use type (s: or i:) in front of avp name Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:init_rpid_avp: invalid rpid AVP specs "$avp(s:rpid)" Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:mod_init: failed to process rpid AVPs Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: init_mod(): Error while initializing module auth
The "old" way still works: modparam("auth","rpid_avp","s:rpid")
just tested again on my laptop, and works ok with:
modparam("auth", "rpid_avp", "$avp(s:rpid)")
Have you got the latest SVN version? Please send "openser -V" to see the SVN revision, if you compiled from sources.
2.) Earlier I had modparam("tm","fr_inv_timer_avp","s:inv_timeout")
and: avp_db_load("$tu",s:inv_timeout) [inv_timeout attribute in database]
What would be the equivalent with the new avp configuration?
in 1.2.0 is:
modparam("tm","fr_inv_timer_avp","$avp(s:inv_timeout)")
avp_db_load("$tu","$avp(s:inv_timeout)");
Cheers, Daniel
br hw
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi, and thx.
openser -V:
version: openser 1.2.0 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 1746 2007-03-05 16:06:58Z miconda $ main.c compiled on 20:06:51 Mar 5 2007 with gcc 3.4.6
br hw
On tor, 2007-03-08 at 23:05 +0200, Daniel-Constantin Mierla wrote:
Hello,
On 03/08/07 22:39, Helge Waastad wrote:
Hi, two small questions this time :-)
1.) From 1.2.x modules dok, default rpid_avp for auth is: modparam("auth", "rpid_avp", "$avp(s:rpid)")
However setting this gives a failure:
parse_avp_name: error - use type (s: or i:) in front of avp name Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:init_rpid_avp: invalid rpid AVP specs "$avp(s:rpid)" Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:mod_init: failed to process rpid AVPs Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: init_mod(): Error while initializing module auth
The "old" way still works: modparam("auth","rpid_avp","s:rpid")
just tested again on my laptop, and works ok with:
modparam("auth", "rpid_avp", "$avp(s:rpid)")
Have you got the latest SVN version? Please send "openser -V" to see the SVN revision, if you compiled from sources.
2.) Earlier I had modparam("tm","fr_inv_timer_avp","s:inv_timeout")
and: avp_db_load("$tu",s:inv_timeout) [inv_timeout attribute in database]
What would be the equivalent with the new avp configuration?
in 1.2.0 is:
modparam("tm","fr_inv_timer_avp","$avp(s:inv_timeout)")
avp_db_load("$tu","$avp(s:inv_timeout)");
Cheers, Daniel
br hw
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hello,
svnrevision: unknown
says that you didn't compile openser in the source tree downloaded from SVN. Also, you changed the version, simply 1.2.0 wasn't set yet on SVN :-), so it is hard for me to guess when you got the sources. The best is to get again the sources from SVN and test one more.
Cheers, Daniel
On 03/08/07 23:11, Helge Waastad wrote:
Hi, and thx.
openser -V:
version: openser 1.2.0 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 1746 2007-03-05 16:06:58Z miconda $ main.c compiled on 20:06:51 Mar 5 2007 with gcc 3.4.6
br hw
On tor, 2007-03-08 at 23:05 +0200, Daniel-Constantin Mierla wrote:
Hello,
On 03/08/07 22:39, Helge Waastad wrote:
Hi, two small questions this time :-)
1.) From 1.2.x modules dok, default rpid_avp for auth is: modparam("auth", "rpid_avp", "$avp(s:rpid)")
However setting this gives a failure:
parse_avp_name: error - use type (s: or i:) in front of avp name Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:init_rpid_avp: invalid rpid AVP specs "$avp(s:rpid)" Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:mod_init: failed to process rpid AVPs Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: init_mod(): Error while initializing module auth
The "old" way still works: modparam("auth","rpid_avp","s:rpid")
just tested again on my laptop, and works ok with:
modparam("auth", "rpid_avp", "$avp(s:rpid)")
Have you got the latest SVN version? Please send "openser -V" to see the SVN revision, if you compiled from sources.
2.) Earlier I had modparam("tm","fr_inv_timer_avp","s:inv_timeout")
and: avp_db_load("$tu",s:inv_timeout) [inv_timeout attribute in database]
What would be the equivalent with the new avp configuration?
in 1.2.0 is:
modparam("tm","fr_inv_timer_avp","$avp(s:inv_timeout)")
avp_db_load("$tu","$avp(s:inv_timeout)");
Cheers, Daniel
br hw
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi, sure will do. Then I guess it'll work. I'll let you know.
br hw
On tor, 2007-03-08 at 23:18 +0200, Daniel-Constantin Mierla wrote:
Hello,
svnrevision: unknown
says that you didn't compile openser in the source tree downloaded from SVN. Also, you changed the version, simply 1.2.0 wasn't set yet on SVN :-), so it is hard for me to guess when you got the sources. The best is to get again the sources from SVN and test one more.
Cheers, Daniel
On 03/08/07 23:11, Helge Waastad wrote:
Hi, and thx.
openser -V:
version: openser 1.2.0 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 1746 2007-03-05 16:06:58Z miconda $ main.c compiled on 20:06:51 Mar 5 2007 with gcc 3.4.6
br hw
On tor, 2007-03-08 at 23:05 +0200, Daniel-Constantin Mierla wrote:
Hello,
On 03/08/07 22:39, Helge Waastad wrote:
Hi, two small questions this time :-)
1.) From 1.2.x modules dok, default rpid_avp for auth is: modparam("auth", "rpid_avp", "$avp(s:rpid)")
However setting this gives a failure:
parse_avp_name: error - use type (s: or i:) in front of avp name Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:init_rpid_avp: invalid rpid AVP specs "$avp(s:rpid)" Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:mod_init: failed to process rpid AVPs Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: init_mod(): Error while initializing module auth
The "old" way still works: modparam("auth","rpid_avp","s:rpid")
just tested again on my laptop, and works ok with:
modparam("auth", "rpid_avp", "$avp(s:rpid)")
Have you got the latest SVN version? Please send "openser -V" to see the SVN revision, if you compiled from sources.
2.) Earlier I had modparam("tm","fr_inv_timer_avp","s:inv_timeout")
and: avp_db_load("$tu",s:inv_timeout) [inv_timeout attribute in database]
What would be the equivalent with the new avp configuration?
in 1.2.0 is:
modparam("tm","fr_inv_timer_avp","$avp(s:inv_timeout)")
avp_db_load("$tu","$avp(s:inv_timeout)");
Cheers, Daniel
br hw
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi, I did a fresh svn co.
Still svnversion: unknown (what should it be?)
But now the rpid avp for auth works.
br hw
On tor, 2007-03-08 at 23:18 +0200, Daniel-Constantin Mierla wrote:
Hello,
svnrevision: unknown
says that you didn't compile openser in the source tree downloaded from SVN. Also, you changed the version, simply 1.2.0 wasn't set yet on SVN :-), so it is hard for me to guess when you got the sources. The best is to get again the sources from SVN and test one more.
Cheers, Daniel
On 03/08/07 23:11, Helge Waastad wrote:
Hi, and thx.
openser -V:
version: openser 1.2.0 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 1746 2007-03-05 16:06:58Z miconda $ main.c compiled on 20:06:51 Mar 5 2007 with gcc 3.4.6
br hw
On tor, 2007-03-08 at 23:05 +0200, Daniel-Constantin Mierla wrote:
Hello,
On 03/08/07 22:39, Helge Waastad wrote:
Hi, two small questions this time :-)
1.) From 1.2.x modules dok, default rpid_avp for auth is: modparam("auth", "rpid_avp", "$avp(s:rpid)")
However setting this gives a failure:
parse_avp_name: error - use type (s: or i:) in front of avp name Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:init_rpid_avp: invalid rpid AVP specs "$avp(s:rpid)" Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:mod_init: failed to process rpid AVPs Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: init_mod(): Error while initializing module auth
The "old" way still works: modparam("auth","rpid_avp","s:rpid")
just tested again on my laptop, and works ok with:
modparam("auth", "rpid_avp", "$avp(s:rpid)")
Have you got the latest SVN version? Please send "openser -V" to see the SVN revision, if you compiled from sources.
2.) Earlier I had modparam("tm","fr_inv_timer_avp","s:inv_timeout")
and: avp_db_load("$tu",s:inv_timeout) [inv_timeout attribute in database]
What would be the equivalent with the new avp configuration?
in 1.2.0 is:
modparam("tm","fr_inv_timer_avp","$avp(s:inv_timeout)")
avp_db_load("$tu","$avp(s:inv_timeout)");
Cheers, Daniel
br hw
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hello,
how do you build openser? Simply "make" in the source tree? Chech if you have svnversion on your system then.
Cheers, Daniel
On 03/09/07 10:51, Helge Waastad wrote:
Hi, I did a fresh svn co.
Still svnversion: unknown (what should it be?)
But now the rpid avp for auth works.
br hw
On tor, 2007-03-08 at 23:18 +0200, Daniel-Constantin Mierla wrote:
Hello,
svnrevision: unknown
says that you didn't compile openser in the source tree downloaded from SVN. Also, you changed the version, simply 1.2.0 wasn't set yet on SVN :-), so it is hard for me to guess when you got the sources. The best is to get again the sources from SVN and test one more.
Cheers, Daniel
On 03/08/07 23:11, Helge Waastad wrote:
Hi, and thx.
openser -V:
version: openser 1.2.0 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 1746 2007-03-05 16:06:58Z miconda $ main.c compiled on 20:06:51 Mar 5 2007 with gcc 3.4.6
br hw
On tor, 2007-03-08 at 23:05 +0200, Daniel-Constantin Mierla wrote:
Hello,
On 03/08/07 22:39, Helge Waastad wrote:
Hi, two small questions this time :-)
1.) From 1.2.x modules dok, default rpid_avp for auth is: modparam("auth", "rpid_avp", "$avp(s:rpid)")
However setting this gives a failure:
parse_avp_name: error - use type (s: or i:) in front of avp name Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:init_rpid_avp: invalid rpid AVP specs "$avp(s:rpid)" Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:mod_init: failed to process rpid AVPs Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: init_mod(): Error while initializing module auth
The "old" way still works: modparam("auth","rpid_avp","s:rpid")
just tested again on my laptop, and works ok with:
modparam("auth", "rpid_avp", "$avp(s:rpid)")
Have you got the latest SVN version? Please send "openser -V" to see the SVN revision, if you compiled from sources.
2.) Earlier I had modparam("tm","fr_inv_timer_avp","s:inv_timeout")
and: avp_db_load("$tu",s:inv_timeout) [inv_timeout attribute in database]
What would be the equivalent with the new avp configuration?
in 1.2.0 is:
modparam("tm","fr_inv_timer_avp","$avp(s:inv_timeout)")
avp_db_load("$tu","$avp(s:inv_timeout)");
Cheers, Daniel
br hw
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi, I'm running make dist and building using rpmbuild.
If I build in source tree, svnversion comes out allright.
br hw
On fre, 2007-03-09 at 11:12 +0200, Daniel-Constantin Mierla wrote:
Hello,
how do you build openser? Simply "make" in the source tree? Chech if you have svnversion on your system then.
Cheers, Daniel
On 03/09/07 10:51, Helge Waastad wrote:
Hi, I did a fresh svn co.
Still svnversion: unknown (what should it be?)
But now the rpid avp for auth works.
br hw
On tor, 2007-03-08 at 23:18 +0200, Daniel-Constantin Mierla wrote:
Hello,
svnrevision: unknown
says that you didn't compile openser in the source tree downloaded from SVN. Also, you changed the version, simply 1.2.0 wasn't set yet on SVN :-), so it is hard for me to guess when you got the sources. The best is to get again the sources from SVN and test one more.
Cheers, Daniel
On 03/08/07 23:11, Helge Waastad wrote:
Hi, and thx.
openser -V:
version: openser 1.2.0 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 1746 2007-03-05 16:06:58Z miconda $ main.c compiled on 20:06:51 Mar 5 2007 with gcc 3.4.6
br hw
On tor, 2007-03-08 at 23:05 +0200, Daniel-Constantin Mierla wrote:
Hello,
On 03/08/07 22:39, Helge Waastad wrote:
Hi, two small questions this time :-)
1.) From 1.2.x modules dok, default rpid_avp for auth is: modparam("auth", "rpid_avp", "$avp(s:rpid)")
However setting this gives a failure:
parse_avp_name: error - use type (s: or i:) in front of avp name Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:init_rpid_avp: invalid rpid AVP specs "$avp(s:rpid)" Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: ERROR:auth:mod_init: failed to process rpid AVPs Mar 8 21:33:46 proxy-02 /usr/sbin/openser[16128]: init_mod(): Error while initializing module auth
The "old" way still works: modparam("auth","rpid_avp","s:rpid")
just tested again on my laptop, and works ok with:
modparam("auth", "rpid_avp", "$avp(s:rpid)")
Have you got the latest SVN version? Please send "openser -V" to see the SVN revision, if you compiled from sources.
2.) Earlier I had modparam("tm","fr_inv_timer_avp","s:inv_timeout")
and: avp_db_load("$tu",s:inv_timeout) [inv_timeout attribute in database]
What would be the equivalent with the new avp configuration?
in 1.2.0 is:
modparam("tm","fr_inv_timer_avp","$avp(s:inv_timeout)")
avp_db_load("$tu","$avp(s:inv_timeout)");
Cheers, Daniel
br hw
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
Daniel-Constantin Mierla -
Helge Waastad