31 Jul
2006
31 Jul
'06
11:55 p.m.
All,
I have just installed the RPM,
openser-1.1.0-rhel3.0.i386.rpm
<http://openser.org/pub/openser/latest/packages/rhel-3.0/openser-1.1.0-r
hel3.0.i386.rpm> , on my Linux box (Linux ... 2.4.21-4.EL #1 Fri Oct 3
18:13:58 EDT 2003 i686 i686 i386 GNU/Linux), and I am having some big
problems on startup- Openser never seems to really finish starting.
/var/log/messages shows:
Jan 25 04:09:08 plat-proxy openser: 0(1567) init_tcp: using sigio_rt as
the io watch method (auto detected)
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: statistics manager
successfully initialized
Jan 25 04:09:08 plat-proxy openser: 0(0) StateLess module -
initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) TM - initializing...
Jan 25 04:09:08 plat-proxy openser: 0(0)
Jan 25 04:09:08 plat-proxy openser: Maxfwd module- initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) TextOPS - initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: udp_init: SO_RCVBUF is
initially 65535
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: udp_init: SO_RCVBUF is
finally 131070
Jan 25 04:09:08 plat-proxy openser: 0(0) WARNING: using only the first
listen address (no fork)
Jan 25 04:09:08 plat-proxy openser: 2(1569) INFO: fifo process
starting: 1569
Jan 25 04:09:08 plat-proxy openser: 2(1569) INFO:open_uac_fifo: fifo
server up at /tmp/openser_fifo...
Jan 25 04:09:12 plat-proxy openser: 2(1569) INFO: no fifo_db_url given
- fifo DB commands disabled!
And that's all.
Did I miss a step? I cant find any references to db_url in my Config
file, and I am using the default one (plus debug variables).
Can anyone offer some help? Thanks!
Louis
This e-mail and any attachment is for authorised use by the intended recipient(s) only. It
may contain proprietary material, confidential information and/or be subject to legal
privilege. It should not be copied, disclosed to, retained or used by, any other party. If
you are not an intended recipient then please promptly delete this e-mail and any
attachment and all copies and inform the sender. Thank you.
31 Jul
31 Jul
11:59 p.m.
Hello,
actually openser started very fine. Those messages are during start up
routine. Once openser starts, no other mesages are printed to syslog
until SIP messages are processed - it stays in listen mode.
To check if it runs or not, just do:
ps auxw | grep openser
Cheers,
Daniel
On 07/31/06 23:55, Alexander, Louis wrote:
All,
I have just installed the RPM, openser-1.1.0-rhel3.0.i386.rpm
<http://openser.org/pub/openser/latest/packages/rhel-3.0/openser-1.1.0-rhel3.0.i386.rpm>,
on my Linux box (Linux … 2.4.21-4.EL #1 Fri Oct 3 18:13:58 EDT 2003 i686 i686 i386
GNU/Linux), and I am having some big problems on startup- Openser never seems to really
finish starting. /var/log/messages shows:
Jan 25 04:09:08 plat-proxy openser: 0(1567) init_tcp: using sigio_rt as the io watch
method (auto detected)
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: statistics manager successfully
initialized
Jan 25 04:09:08 plat-proxy openser: 0(0) StateLess module - initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) TM - initializing...
Jan 25 04:09:08 plat-proxy openser: 0(0)
Jan 25 04:09:08 plat-proxy openser: Maxfwd module- initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) TextOPS - initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: udp_init: SO_RCVBUF is initially 65535
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: udp_init: SO_RCVBUF is finally 131070
Jan 25 04:09:08 plat-proxy openser: 0(0) WARNING: using only the first listen address
(no fork)
Jan 25 04:09:08 plat-proxy openser: 2(1569) INFO: fifo process starting: 1569
Jan 25 04:09:08 plat-proxy openser: 2(1569) INFO:open_uac_fifo: fifo server up at
/tmp/openser_fifo...
Jan 25 04:09:12 plat-proxy openser: 2(1569) INFO: no fifo_db_url given - fifo DB
commands disabled!
And that’s all.
Did I miss a step? I cant find any references to db_url in my Config file, and I am
using the default one (plus debug variables).
Can anyone offer some help? Thanks!
Louis
This e-mail and any attachment is for authorised use by the intended
recipient(s) only. It may contain proprietary material, confidential
information and/or be subject to legal privilege. It should not be
copied, disclosed to, retained or used by, any other party. If you are
not an intended recipient then please promptly delete this e-mail and
any attachment and all copies and inform the sender. Thank you.
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
1 Aug
1 Aug
5:50 p.m.
I have traced through the /etc/init.d/openser script and it seems that the
following line is being executed
initlog -q -c /usr/sbin/openser
This call to initlog never returns (unless i add & at the end, which im not
sure is correct)
I browsed through the manpage for initlog, and didn't see anything out of
the ordinary. Is this call to initlog supposed to return? If not, then how
can the rest of the init.d script execute?
Thanks
Louis
-----Original Message-----
From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro]
Sent: Monday, July 31, 2006 4:59 PM
To: Alexander, Louis
Cc: users(a)openser.org
Subject: Re: [Users] OpenSER 1.1.0 Hangs on Startup
Hello,
actually openser started very fine. Those messages are during start up
routine. Once openser starts, no other mesages are printed to syslog
until SIP messages are processed - it stays in listen mode.
To check if it runs or not, just do:
ps auxw | grep openser
Cheers,
Daniel
On 07/31/06 23:55, Alexander, Louis wrote:
All,
I have just installed the RPM,
openser-1.1.0-rhel3.0.i386.rpm
<http://openser.org/pub/openser/latest/packages/rhel-3.0/openser-1.1.0-rhel3
.0.i386.rpm>, on my Linux box (Linux . 2.4.21-4.EL #1 Fri Oct 3 18:13:58 EDT
2003 i686 i686 i386 GNU/Linux), and I am having some big problems on
startup- Openser never seems to really finish starting. /var/log/messages
shows:
Jan 25 04:09:08 plat-proxy openser: 0(1567) init_tcp: using sigio_rt as
the io
watch method (auto detected)
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO:
statistics manager
successfully initialized
Jan 25 04:09:08 plat-proxy openser: 0(0) StateLess
module - initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) TM - initializing...
Jan 25 04:09:08 plat-proxy openser: 0(0)
Jan 25 04:09:08 plat-proxy openser: Maxfwd module- initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) TextOPS - initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: udp_init: SO_RCVBUF is
initially
65535
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO:
udp_init: SO_RCVBUF is
finally 131070
Jan 25 04:09:08 plat-proxy openser: 0(0) WARNING:
using only the first
listen address (no fork)
Jan 25 04:09:08 plat-proxy openser: 2(1569) INFO:
fifo process starting:
1569
Jan 25 04:09:08 plat-proxy openser: 2(1569)
INFO:open_uac_fifo: fifo
server up at /tmp/openser_fifo...
Jan 25 04:09:12 plat-proxy openser: 2(1569) INFO: no
fifo_db_url given -
fifo DB commands disabled!
And that's all.
Did I miss a step? I cant find any references to db_url in my Config
file, and I
am using the default one (plus debug variables).
Can anyone offer some help? Thanks!
Louis
This e-mail and any attachment is for authorised use by the intended
recipient(s) only. It may contain proprietary material, confidential
information and/or be subject to legal privilege. It should not be
copied, disclosed to, retained or used by, any other party. If you are
not an intended recipient then please promptly delete this e-mail and
any attachment and all copies and inform the sender. Thank you.
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
2 Aug
2 Aug
6:57 p.m.
After I put the call to initlog in the background, openser is listening, but
doesn't appear to be executing any routing logic. My register requests are
falling on deaf ears so to speak. Can anyone offer any help or suggestions
on this very remedial question?
Thanks
Louis
-----Original Message-----
From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf
Of Louis Alexander
Sent: Tuesday, August 01, 2006 10:51 AM
To: daniel(a)voice-system.ro
Cc: users(a)openser.org
Subject: RE: [Users] OpenSER 1.1.0 Hangs on Startup
I have traced through the /etc/init.d/openser script and it seems that the
following line is being executed
initlog -q -c /usr/sbin/openser
This call to initlog never returns (unless i add & at the end, which im not
sure is correct)
I browsed through the manpage for initlog, and didn't see anything out of
the ordinary. Is this call to initlog supposed to return? If not, then how
can the rest of the init.d script execute?
Thanks
Louis
-----Original Message-----
From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro]
Sent: Monday, July 31, 2006 4:59 PM
To: Alexander, Louis
Cc: users(a)openser.org
Subject: Re: [Users] OpenSER 1.1.0 Hangs on Startup
Hello,
actually openser started very fine. Those messages are during start up
routine. Once openser starts, no other mesages are printed to syslog
until SIP messages are processed - it stays in listen mode.
To check if it runs or not, just do:
ps auxw | grep openser
Cheers,
Daniel
On 07/31/06 23:55, Alexander, Louis wrote:
All,
I have just installed the RPM,
openser-1.1.0-rhel3.0.i386.rpm
<http://openser.org/pub/openser/latest/packages/rhel-3.0/openser-1.1.0-rhel3
.0.i386.rpm>, on my Linux box (Linux . 2.4.21-4.EL #1 Fri Oct 3 18:13:58 EDT
2003 i686 i686 i386 GNU/Linux), and I am having some big problems on
startup- Openser never seems to really finish starting. /var/log/messages
shows:
Jan 25 04:09:08 plat-proxy openser: 0(1567) init_tcp: using sigio_rt as
the io
watch method (auto detected)
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO:
statistics manager
successfully initialized
Jan 25 04:09:08 plat-proxy openser: 0(0) StateLess
module - initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) TM - initializing...
Jan 25 04:09:08 plat-proxy openser: 0(0)
Jan 25 04:09:08 plat-proxy openser: Maxfwd module- initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) TextOPS - initializing
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO: udp_init: SO_RCVBUF is
initially
65535
Jan 25 04:09:08 plat-proxy openser: 0(0) INFO:
udp_init: SO_RCVBUF is
finally 131070
Jan 25 04:09:08 plat-proxy openser: 0(0) WARNING:
using only the first
listen address (no fork)
Jan 25 04:09:08 plat-proxy openser: 2(1569) INFO:
fifo process starting:
1569
Jan 25 04:09:08 plat-proxy openser: 2(1569)
INFO:open_uac_fifo: fifo
server up at /tmp/openser_fifo...
Jan 25 04:09:12 plat-proxy openser: 2(1569) INFO: no
fifo_db_url given -
fifo DB commands disabled!
And that's all.
Did I miss a step? I cant find any references to db_url in my Config
file, and I
am using the default one (plus debug variables).
Can anyone offer some help? Thanks!
Louis
This e-mail and any attachment is for authorised use by the intended
recipient(s) only. It may contain proprietary material, confidential
information and/or be subject to legal privilege. It should not be
copied, disclosed to, retained or used by, any other party. If you are
not an intended recipient then please promptly delete this e-mail and
any attachment and all copies and inform the sender. Thank you.
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6693
days inactive
6695
days old
3 comments
3 participants
participants (3)
-
Alexander, Louis -
Daniel-Constantin Mierla -
Louis Alexander