[Serusers] SER & Radius Acct - sr-users

19 Mar 2004

Hi List,

Is the Radius HOWTO (http://www.iptel.org/ser/doc/ser_radius/ser_radius.html)
is correct when it stated that 
"
 To enable RADIUS accounting simply use radius_log_flag and
radius_log_missed_flag parameters instead of log_flag  and log_missed_flag.
Mark transactions that should be logged with flags configured in the parameters. "

but in README under ser/sip_router/modules/acc, I don't find any export
parameter "radius_log_flag", and when I did as in Radius HOWTO (as above) I
received :
0(7757) set_mod_param_regex: parameter <radius_log_flag> not found in module
<acc>
 0(7757) parse error (43,38-39): Can't set module parameter
ERROR: bad config file (1 errors)

But without it, I received:
acc - initializing
 0(7767) ERROR: acc: init_child bind_db failed...did you load a database module?
 0(7767) init_mod(): Error while initializing module acc

My ser.cfg is:
====================
debug=3
fork=yes
log_stderror=yes

check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
alias="fptnet.vn"
alias="hnluat.edu"
alias="sgluat.edu"
alias="sg.fptnet.com"
alias="fptnet.com"

#loadmodule "/usr/local/lib/ser/modules/mysql.so"
#loadmodule "/usr/local/lib/ser/modules/postgres.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
#loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
#loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/xlog.so"
#modparam("usrloc", "db_mode",   0)
#modparam("uri_radius", "service_type", 11)
#modparam("rr", "enable_full_lr", 1)
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient/radiusclient.conf")
modparam("acc", "radius_config",
"/usr/local/etc/radiusclient/radiusclient.conf")
modparam("xlog", "buf_size", 8192)

###
modparam("acc", "log_level", 1)
modparam("acc", "log_flag" , 1)
modparam("acc", "radius_flag", 1)
modparam("tm", "fr_inv_timer", 15 )
modparam("tm", "fr_timer", 10 )
modparam("auth", "secret", "testing123")
modparam("auth_radius", "service_type", 15)
###
route{

        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
#       if ( msg:len > max_len ) {
#               sl_send_reply("513", "Message too big");
#               break;
#       };

        record_route();
        if (loose_route()) {
                t_relay();
                break;
        };

        if (uri==myself) {
                xlog("L_ERR", " method <%rm> <%fu>
<%tu>\n");
                if (method=="REGISTER") {
#                       # if (!www_authorize("mydomain",
"subscriber")) {
                        if (!radius_www_authorize("")) {
                                www_challenge("", "0");
                                break;
                        };

                        save("location");
                        break;
                };
               setflag(1);
                if (method=="INVITE") record_route();

                if (method=="REGISTER") {
                        log(1, "REGISTER received\n");
                } else {
                        log(1, "non-REGISTER received\n");
                };
                if (uri=~"sip:.*[@:]fptnet.vn") {
                        log(1, "request for fptnet.vn\n");
                } else {
                        log(1, "request for other domain received\n");
                };

                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        #};
                if (!t_relay()) {
                        sl_reply_error();
                };

        };
}

========================

How to setup acct to plain text file, while authentification via radius ?
( I would like to see what the acct details looked like to prepare acct table
for radius ).

Thank you very much for any reply.
Best regards

Anton,