Hi Nicolas, what openser version are you using? regards, bogdan Nicolas Palix wrote: >Hi, > >I have installed openser and its CPL module and I use CPLEd to write and >upload service. > >I have some problem with the timeout attribut of proxy XML node. >It's seem to be not taken into account and the "no answer" node is > interpreted about 2 min later. I set the timeout in the CPL script at 5 > sec. > >After re-reading the CPL module documentation and check the cpl_proxy.h > code, I try to set the "timer_avp" param without success. > >Can I have some information on how AVP and timer works ? >What I should configured to have CPL enable installation of OpenSER ? > > >Best regards

Nicolas, timeout attribute in porxt node is fully supported in this version. Just take care that the "timer_avp" mod param from cpl-c http://openser.org/docs/modules/1.1.x/cpl-c.html#AEN185 is synchronized with "fr_inv_timer_avp" mod param from TM http://openser.org/docs/modules/1.1.x/tm.html#AEN251 regards, bogdan Nicolas Palix wrote: >Oups... sorry > >It's version 1.1.0-tls > >Le jeudi 28 septembre 2006 12:20, Bogdan-Andrei Iancu a écrit : >>Hi Nicolas, >> >>what openser version are you using? >> >>regards, >>bogdan >> >>Nicolas Palix wrote: >>>Hi, >>> >>>I have installed openser and its CPL module and I use CPLEd to write and >>>upload service. >>> >>>I have some problem with the timeout attribut of proxy XML node. >>>It's seem to be not taken into account and the "no answer" node is >>>interpreted about 2 min later. I set the timeout in the CPL script at 5 >>>sec. >>> >>>After re-reading the CPL module documentation and check the cpl_proxy.h >>>code, I try to set the "timer_avp" param without success. >>> >>>Can I have some information on how AVP and timer works ? >>>What I should configured to have CPL enable installation of OpenSER ? >>> >>> >>>Best regards