9 Nov
2023
9 Nov
'23
9:51 a.m.
I'm encountering an issue with dialog handling in Kamailio. Initially, everything
functions correctly, and if a connection terminates within two minutes, the BYE method
works as expected. However, if the call exceeds two minutes, the BYE method doesn't
seem to be recognized, and there are no related entries in the logs.
As someone new to working with Kamailio, I'm finding this quite perplexing. Could
anyone offer guidance or troubleshooting steps to resolve this issue?
Thank you for your assistance.
9 Nov
9 Nov
10:35 a.m.
If you not involve dialog module, then kamailio won't care about dialog (
as it is Proxy, not UA)
The Indialog requests processing is done over proxy routing mechanisms (
rfc3261 paragraph 16 )
So, after mentioning above:
What you mean under "unrecognised" ?
On Thu, 9 Nov 2023, 10:18 aaron.soto--- via sr-users, <
sr-users(a)lists.kamailio.org> wrote:
I'm encountering an issue with dialog handling in
Kamailio. Initially,
everything functions correctly, and if a connection terminates within two
minutes, the BYE method works as expected. However, if the call exceeds two
minutes, the BYE method doesn't seem to be recognized, and there are no
related entries in the logs.
As someone new to working with Kamailio, I'm finding this quite
perplexing. Could anyone offer guidance or troubleshooting steps to resolve
this issue?
Thank you for your assistance.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
11:11 a.m.
Thank you for your response,
I have confirmed that the dialog module is indeed loaded. However, as I
mentioned before, after 2 minutes, the BYE messages are no longer
recognized by Kamailio, and I'm uncertain why this is occurring. Perhaps
sharing a screenshot from sngrep could offer more specifics. I suspect
the issue might lie in the configuration of the dialog module, although
I am not certain of this.
El 9/11/23 a las 10:35, Yuriy G escribió:
If you not involve dialog module, then kamailio
won't care about
dialog ( as it is Proxy, not UA)
The Indialog requests processing is done over proxy routing mechanisms
( rfc3261 paragraph 16 )
So, after mentioning above:
What you mean under "unrecognised" ?
On Thu, 9 Nov 2023, 10:18 aaron.soto--- via sr-users,
<sr-users(a)lists.kamailio.org> wrote:
I'm encountering an issue with dialog handling in Kamailio.
Initially, everything functions correctly, and if a connection
terminates within two minutes, the BYE method works as expected.
However, if the call exceeds two minutes, the BYE method doesn't
seem to be recognized, and there are no related entries in the logs.
As someone new to working with Kamailio, I'm finding this quite
perplexing. Could anyone offer guidance or troubleshooting steps
to resolve this issue?
Thank you for your assistance.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply
only to the sender!
Edit mailing list options or unsubscribe:
11:46 a.m.
Screenshot doesn't help more than raw BYE request would.
But mostly you need to look into kamailio service logs. Better with
CFGTRACE debugger parameter enabled. It will show you on which step BYE
handling was dropped. Also it may show you some meaningful output regarding
the reason it wss dropped.
On Thu, 9 Nov 2023, 11:11 Aaron Soto, <aaron.soto(a)dialapplet.com> wrote:
Thank you for your response,
I have confirmed that the dialog module is indeed loaded. However, as I
mentioned before, after 2 minutes, the BYE messages are no longer
recognized by Kamailio, and I'm uncertain why this is occurring. Perhaps
sharing a screenshot from sngrep could offer more specifics. I suspect the
issue might lie in the configuration of the dialog module, although I am
not certain of this.
El 9/11/23 a las 10:35, Yuriy G escribió:
If you not involve dialog module, then kamailio won't care about dialog (
as it is Proxy, not UA)
The Indialog requests processing is done over proxy routing mechanisms (
rfc3261 paragraph 16 )
So, after mentioning above:
What you mean under "unrecognised" ?
On Thu, 9 Nov 2023, 10:18 aaron.soto--- via sr-users, <
sr-users(a)lists.kamailio.org> wrote:
I'm encountering an issue with dialog
handling in Kamailio. Initially,
everything functions correctly, and if a connection terminates within two
minutes, the BYE method works as expected. However, if the call exceeds two
minutes, the BYE method doesn't seem to be recognized, and there are no
related entries in the logs.
As someone new to working with Kamailio, I'm finding this quite
perplexing. Could anyone offer guidance or troubleshooting steps to resolve
this issue?
Thank you for your assistance.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
12:53 p.m.
I enabled CFGTRACE, but the logs don't show this BYE; the only BYE that
appears is after 5 minutes, which is sent by Asterisk to Kamailio. It's
confusing because it seems like Kamailio isn't processing the BYE when i
make a hangup with my phone.
El 9/11/23 a las 11:46, Yuriy G escribió:
Screenshot doesn't help more than raw BYE request
would.
But mostly you need to look into kamailio service logs. Better with
CFGTRACE debugger parameter enabled. It will show you on which step
BYE handling was dropped. Also it may show you some meaningful output
regarding the reason it wss dropped.
12:58 p.m.
Check your firewall. According the screenshot and your description - it
seems it is not delivered to kamailio service. So very possible blocked by
firewall.
On Thu, 9 Nov 2023, 12:53 Aaron Soto, <aaron.soto(a)dialapplet.com> wrote:
I enabled CFGTRACE, but the logs don't show this
BYE; the only BYE that
appears is after 5 minutes, which is sent by Asterisk to Kamailio. It's
confusing because it seems like Kamailio isn't processing the BYE when i
make a hangup with my phone.
El 9/11/23 a las 11:46, Yuriy G escribió:
Screenshot doesn't help more than raw BYE request would.
But mostly you need to look into kamailio service logs. Better with
CFGTRACE debugger parameter enabled. It will show you on which step BYE
handling was dropped. Also it may show you some meaningful output regarding
the reason it wss dropped.
10 Nov
10 Nov
1:20 p.m.
I have checked it but everything seems to be ok, I have noticed that
kamailio is calling on a random port on each call, do you know if this
could mean a problem?
Thanks for your help.
El 9/11/23 a las 12:58, Yuriy G escribió:
Check your firewall. According the screenshot and your
description -
it seems it is not delivered to kamailio service. So very possible
blocked by firewall.
On Thu, 9 Nov 2023, 12:53 Aaron Soto, <aaron.soto(a)dialapplet.com> wrote:
I enabled CFGTRACE, but the logs don't show this BYE; the only BYE
that appears is after 5 minutes, which is sent by Asterisk to
Kamailio. It's confusing because it seems like Kamailio isn't
processing the BYE when i make a hangup with my phone.
El 9/11/23 a las 11:46, Yuriy G escribió:
--
Aaron Soto
Departamento de telefonía - DA PROYECYO MANHATTAN
Facebook icon <https://www.facebook.com/Dialapplet> LinkedIn icon
<https://www.linkedin.com/company/dialapplet> Twitter icon
<https://twitter.com/Dialapplet> Youtube icon
<https://www.dialapplet.com> Instagram icon <mailto:info@dialapplet.com>
Logo <https://www.dialapplet.com/> T: (+34) 96 344 1038
E: aaron.soto(a)dialapplet.com
W: www.dialapplet.com <https://www.dialapplet.com> España
46022 Valencia
C/ Duque de Gaeta, 44
AVISO DE CONFIDENCIALIDAD
Le informamos, como destinatario de este mensaje, que el correo
electrónico vía Internet no permite asegurar la confidencialidad de los
mensajes transmitidos ni su integridad o correcta recepción. Si no
consintiera la utilización del correo electrónico vía Internet, rogamos
nos lo comunique de forma inmediata. Este mensaje va dirigido de manera
exclusiva a su destinatario y puede contener información confidencial
cuya divulgación está prohibida por la ley. Si ha recibido este mensaje
por error, le rogamos nos lo comunique de forma inmediata por esta misma
vía y proceda a su eliminación, así como a la de cualquier documento
adjunto al mismo. Asímismo, si no es el destinatario del mensaje, se le
informa de que su lectura, copia, distribución y utilización, así como
la de cualquier documento adjunto, sea cual sea su finalidad, están
prohibidas.
CONFIDENTIALITY WARNING
We hereby inform you, as addressee of this message, that Internet e-mail
neither guarantees the confidentiality nor the completeness or proper
receipt of the messages sent. If you do not consent to the use of
Internet e-mail, please notify us immediately. This message is intended
exclusively for its addressee and may contain confidential information
protected from disclosure by law. If you have received this message in
error, please immediately notify us via e-mail and delete it and any
attachment. If you are not the addressee indicated in this message,
please be informed that any reading, copy, distribution or use of it or
its attachments, for any purpose, is forbidden.
Screenshot doesn't help more than raw BYE
request would.
But mostly you need to look into kamailio service logs. Better
with CFGTRACE debugger parameter enabled. It will show you on
which step BYE handling was dropped. Also it may show you some
meaningful output regarding the reason it wss dropped.
192
days inactive
193
days old
6 comments
3 participants
participants (3)
-
Aaron Soto -
aaron.soto＠dialapplet.com
-
Yuriy G