May I ask why? for billing purpose or something else? Thanks, Pat ----- Original Message ----- From: "Klaus Darilion" <klaus.mailinglists(a)pernau.at> To: "Russell Cozens" <rjc(a)stuksupport.com> Cc: <serusers(a)lists.iptel.org> Sent: Tuesday, September 27, 2005 10:22 AM Subject: Re: [Serusers] Changing contents of TO address > Hi Russel! > > > 2. Check if the GW can be configured to route according to the request > URI. If not, check for firmware updates, throw them away or ask the vendor > to fix it. (Which product do you use)? > > regards > klaus > > Russell Cozens wrote: >> Hi, >> >> I am trying to setup a PSTN gateway, the documentation is fine for this >> and I have it working successfully with a gateway. >> >> However, the gateway I would like to use is a bit fussy and seems to be >> looking at the SIP TO address as well as the INVITE line. >> >> I am using rewritehost to change the domain in the uri and this changes >> the INVITE header but not the SIP TO address within the INVITE. >> >> Is it possible to change this ? >> >> I’ve even tried various replace commands from textops.so but the “to” >> field is never changed. >> >> Thanks >> >> Russell >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

Hi Pat, You can confuse alot more then only ser by doing it. Many UA's is using To and From in matching. So, if you change to, the UA would'nt know what the message it got was for.. - Atle * Chris St Denis <chris(a)aebc.com> [050928 23:28]: