Hi Wolfgang, I would say adding the RPID hdr along with changing the FROM hdr is a little bit redundant - as most of the SIP phones do not interpret the RPID hdr, you may use RPID without FROM changing if the call goes to a GW and FROM changing (without adding RPID) if goes to a SIP UA.

regards, bogdan Wolfgang Hottgenroth wrote: _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

How about the setting in version 1.0.0? As found that remove_hf function is only available in devel version. unplug For the remove_hf On 2/21/06, Wolfgang Hottgenroth <woho(a)hottis.de> wrote: _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Thanks! I have tested it. That function works fine. However, the setting doesn't work for me. I noticed that there is a problem after executing the function uac_replace_from("anonymous", "sip:anonymous@127.0.0.1"); This function with parameter will totally replace the From header and it will cause one way ringing. On 2/21/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote: _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Hi, Thanks for the hint. I have tried it and it has no effect when a call come from the other network. Instead, I need to remove the From and reconstruct the From header as below. remove_hf("From"); avp_pushto("$From", "s:fromheader"); Rgds, unplug On 2/21/06, Bogdan-Andrei Iancu &lt;bogdan(a)voice-system.ro&gt; wrote: >Hi, > >if want to replace only the display, set the second param to empty >string. Also do not forget to set the from_restore_mode to "auto" - see >the doc: > http://openser.org/docs/modules/1.0.x/uac.html#AEN75 > >regards, >bogdan > >unplug wrote: > > > >>Thanks! I have tested it. That function works fine. >> >>However, the setting doesn't work for me. I noticed that there is a >>problem after executing the function >>uac_replace_from("anonymous", "sip:anonymous@127.0.0.1"); >>This function with parameter will totally replace the From header and >>it will cause one way ringing. >> >> >>On 2/21/06, Klaus Darilion &lt;klaus.mailinglists(a)pernau.at&gt; wrote: >> >> >> >> >>>No, it works in all versions of (open)ser. It was only forgotten to >>>document it. >>> >>>regards >>>klaus >>> >>>unplug wrote: >>> >>> >>> >>> >>>>How about the setting in version 1.0.0? As found that remove_hf >>>>function is only available in devel version. >>>> >>>>unplug >>>> >>>>For the remove_hf >>>> >>>>On 2/21/06, Wolfgang Hottgenroth &lt;woho(a)hottis.de&gt; wrote: >>>> >>>> >>>> >>>> >>>>>I've done it this way: >>>>> >>>>>if (search("^Remote-Party-ID:.*<sip:.*?>.*?;privacy=full.*?")) { >>>>> xlog("L_NOTICE", "*** full privacy requested\n"); >>>>> remove_hf("Remote-Party-ID"); >>>>> append_hf("Remote-Party-ID:\ >>>>><sip:anonymous@127.0.0.1>;party=calling;screen=yes;privacy=full\n"); >>>>> uac_replace_from("anonymous", "sip:anonymous@127.0.0.1"); >>>>> >>>>> avp_printf("contacthelp", "$hdr(contact)"); >>>>> # xlog("L_NOTICE", "*** contact: $avp(contacthelp)\n"); >>>>> avp_subst("contacthelp", "/<sip:(.*)@(.*)>/<sip:\2>/"); >>>>> # xlog("L_NOTICE", "*** contact substituted: $avp(contacthelp)\n"); >>>>> remove_hf("Contact"); >>>>> avp_pushto("$Contact", "s:contacthelp"); >>>>>} >>>>> >>>>>More interesting than disabling the callees phone from displaying the >>>>>number is to remove it completely from the SIP messages, since the >>>>>black-hat callee could run tcpdump in front of his phone. >>>>> >>>>> >>>>>What do other ones think about my approach? In my setup it works fine, >>>>>as it seems. >>>>> >>>>> >>>>> >>>>> >>_______________________________________________ >>Users mailing list &gt;&gt;Users(a)openser.org >>http://openser.org/cgi-bin/mailman/listinfo/users >> >> >> >> >> > >