I see ...will it be an issue if you upgrade to 1.2 ?

regards, bogdan

[ACTIVENDY] NOC wrote:

Hi,

When I place a call and I use the "openserctl fifo dlg_list" command I see one call. But I log the "$dlg_count" value and it's always 0.

Thanks,

Sergi

Bogdan-Andrei Iancu wrote:

...

Hi Sergi,

Try first to see if the dialogs are really monitored - use the fifo command dlg_list to see the active calls: openserctl fifo dlg_list

(of course, you need to have ongoing calls in order to see something).

btw, the variable is $dlg_count

regards, Bogdan

[ACTIVENDY] NOC wrote:

...

I've changed it and now I doesn't get any error. But I configured my Openser like that:

if (avp_check("$DLG_count", "gt/i:0")) { sl_send_reply("403","no more calls accepted"); exit; }

I supose that now I cannot call because when I will try to call (one call greater than zero) I will get "403 no more calls accepted". But it doesn't work, I can call normally.

I try to configure too the dlg_flag:

modparam("dialog","dlg_flag",3)

and if sip method is INVITE:

setflag(3)

What I have to do to limit the simultaneous calls?

Thanks in advance,

Sergi

Ovidiu Sas wrote:

...

No you are not. You are using the one that is available for 1.2, not for 1.1. $dlg_count != $DLG_count Check the documentation for the right openser version.

Regards, Ovidiu Sas

On 7/4/07, [ACTIVENDY] NOC noc@activendy.com wrote:

...

I'm using it, as you can see in my configuration file. But when I try to call I get this error:

8(4826) xl_get_spec_value: error - null sp->itf 8(4826) ERROR:avpops:ops_check_avp: cannot get src value

Thanks in advance,

Sergi

Ovidiu Sas wrote:

...

You need to use $dlg_count with openser 1.1. http://www.openser.org/docs/modules/1.1.x/dialog.html#AEN167

Regards, Ovidiu Sas

On 7/4/07, [ACTIVENDY] NOC noc@activendy.com wrote: > Hi, > > I want to limit the simultaneous calls on my Openser server. I

use this

...

> code to limit the calls: > > ..... > > isten=xxx.xxx.xxx.xxx > listen=xxx.xxx.xxx.xxx. # put your server IP address here > port=5060 > children=4 > > dns=no > rev_dns=no > fifo="/tmp/openser_fifo" > fifo_db_url="mysql://xxxxxxxxxxxxxx > > loadmodule "/usr/lib/openser/modules/mysql.so" > loadmodule "/usr/lib/openser/modules/sl.so" > loadmodule "/usr/lib/openser/modules/tm.so" > loadmodule "/usr/lib/openser/modules/rr.so" > loadmodule "/usr/lib/openser/modules/maxfwd.so" > loadmodule "/usr/lib/openser/modules/usrloc.so" > loadmodule "/usr/lib/openser/modules/registrar.so" > loadmodule "/usr/lib/openser/modules/uri_db.so" > loadmodule "/usr/lib/openser/modules/auth.so" > loadmodule "/usr/lib/openser/modules/auth_db.so" > loadmodule "/usr/lib/openser/modules/uri.so" > loadmodule "/usr/lib/openser/modules/domain.so" > loadmodule "/usr/lib/openser/modules/textops.so" > loadmodule "/usr/lib/openser/modules/avpops.so" > loadmodule "/usr/lib/openser/modules/xlog.so" > loadmodule "/usr/lib/openser/modules/dispatcher.so" > loadmodule "/usr/lib/openser/modules/permissions.so" > loadmodule "/usr/lib/openser/modules/acc.so" > loadmodule "/usr/lib/openser/modules/dialog.so" > > modparam("dispatcher", "list_file",

"/etc/openser/dispatcher.list")

...

> modparam("acc|auth_db|uri_db|usrloc|permissions", "db_url", > "mysql://xxxxxxxxxxx") > modparam("avpops","db_url","mysql://xxxxxxxxxxxxxxxx) > modparam("auth_db", "calculate_ha1", 1) > modparam("auth_db", "password_column", "password") > modparam("usrloc", "db_mode", 2) > modparam("rr", "enable_full_lr", 1) > modparam("tm", "wt_timer", 30) > modparam("tm", "fr_timer", 2) > modparam("tm", "fr_inv_timer", 120) > #modparam("tm", "fr_inv_timer_avp", "inv_timeout") > modparam("permissions", "default_allow_file", > "/etc/openser/permissions.allow") > modparam("permissions", "db_mode", 1) > modparam("dispatcher", "flags", 2 ) > modparam("acc", "db_flag", 1) > modparam("acc", "db_missed_flag", 2) > modparam("acc", "log_flag", 1) > modparam("acc", "log_missed_flag", 2) > > modparam("dispatcher", "cnt_avp_id", 4) > > modparam("avpops","avp_table","gw_avail_port") > > modparam("dialog", "enable_stats", 1) > > modparam("dialog","dlg_flag",3) > > > ..... > > > > if (avp_check("$DLG_count", "gt/i:10")) { > sl_send_reply("403","no more calls accepted"); > exit; > } > > But I get the following error when I try to call and it

doesn't work:

...

> > > 8(4826) xl_get_spec_value: error - null sp->itf > 8(4826) ERROR:avpops:ops_check_avp: cannot get src value > > My Openser version is 1.1.1 > > Thanks > > _______________________________________________ > Users mailing list > Users@openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >

---

---

Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users

Perfect - let me know if the problem persists with 1.2 version.

regards, bogdan

[ACTIVENDY] NOC wrote:

Hi,

I'll try to upgrade to 1.2 to solve the problem.

Thanks,

Sergi

Bogdan-Andrei Iancu wrote:

...

I see ...will it be an issue if you upgrade to 1.2 ?

regards, bogdan

[ACTIVENDY] NOC wrote:

...

Hi,

When I place a call and I use the "openserctl fifo dlg_list" command I see one call. But I log the "$dlg_count" value and it's always 0.

Thanks,

Sergi

Bogdan-Andrei Iancu wrote:

...

Hi Sergi,

Try first to see if the dialogs are really monitored - use the fifo command dlg_list to see the active calls: openserctl fifo dlg_list

(of course, you need to have ongoing calls in order to see something).

btw, the variable is $dlg_count

regards, Bogdan

[ACTIVENDY] NOC wrote:

...

I've changed it and now I doesn't get any error. But I configured my Openser like that:

if (avp_check("$DLG_count", "gt/i:0")) { sl_send_reply("403","no more calls accepted"); exit; }

I supose that now I cannot call because when I will try to call (one call greater than zero) I will get "403 no more calls accepted". But it doesn't work, I can call normally.

I try to configure too the dlg_flag:

modparam("dialog","dlg_flag",3)

and if sip method is INVITE:

setflag(3)

What I have to do to limit the simultaneous calls?

Thanks in advance,

Sergi

Ovidiu Sas wrote:

...

No you are not. You are using the one that is available for 1.2, not for 1.1. $dlg_count != $DLG_count Check the documentation for the right openser version.

Regards, Ovidiu Sas

On 7/4/07, [ACTIVENDY] NOC noc@activendy.com wrote: > I'm using it, as you can see in my configuration file. But when > I try to > call I get this error: > > 8(4826) xl_get_spec_value: error - null sp->itf > 8(4826) ERROR:avpops:ops_check_avp: cannot get src value > > Thanks in advance, > > Sergi > > Ovidiu Sas wrote: > > You need to use $dlg_count with openser 1.1. > > http://www.openser.org/docs/modules/1.1.x/dialog.html#AEN167 > > > > > > Regards, > > Ovidiu Sas > > > > On 7/4/07, [ACTIVENDY] NOC noc@activendy.com wrote: > >> Hi, > >> > >> I want to limit the simultaneous calls on my Openser server. > I use this > >> code to limit the calls: > >> > >> ..... > >> > >> isten=xxx.xxx.xxx.xxx > >> listen=xxx.xxx.xxx.xxx. # put your server IP address here > >> port=5060 > >> children=4 > >> > >> dns=no > >> rev_dns=no > >> fifo="/tmp/openser_fifo" > >> fifo_db_url="mysql://xxxxxxxxxxxxxx > >> > >> loadmodule "/usr/lib/openser/modules/mysql.so" > >> loadmodule "/usr/lib/openser/modules/sl.so" > >> loadmodule "/usr/lib/openser/modules/tm.so" > >> loadmodule "/usr/lib/openser/modules/rr.so" > >> loadmodule "/usr/lib/openser/modules/maxfwd.so" > >> loadmodule "/usr/lib/openser/modules/usrloc.so" > >> loadmodule "/usr/lib/openser/modules/registrar.so" > >> loadmodule "/usr/lib/openser/modules/uri_db.so" > >> loadmodule "/usr/lib/openser/modules/auth.so" > >> loadmodule "/usr/lib/openser/modules/auth_db.so" > >> loadmodule "/usr/lib/openser/modules/uri.so" > >> loadmodule "/usr/lib/openser/modules/domain.so" > >> loadmodule "/usr/lib/openser/modules/textops.so" > >> loadmodule "/usr/lib/openser/modules/avpops.so" > >> loadmodule "/usr/lib/openser/modules/xlog.so" > >> loadmodule "/usr/lib/openser/modules/dispatcher.so" > >> loadmodule "/usr/lib/openser/modules/permissions.so" > >> loadmodule "/usr/lib/openser/modules/acc.so" > >> loadmodule "/usr/lib/openser/modules/dialog.so" > >> > >> modparam("dispatcher", "list_file", > "/etc/openser/dispatcher.list") > >> modparam("acc|auth_db|uri_db|usrloc|permissions", "db_url", > >> "mysql://xxxxxxxxxxx") > >> modparam("avpops","db_url","mysql://xxxxxxxxxxxxxxxx) > >> modparam("auth_db", "calculate_ha1", 1) > >> modparam("auth_db", "password_column", "password") > >> modparam("usrloc", "db_mode", 2) > >> modparam("rr", "enable_full_lr", 1) > >> modparam("tm", "wt_timer", 30) > >> modparam("tm", "fr_timer", 2) > >> modparam("tm", "fr_inv_timer", 120) > >> #modparam("tm", "fr_inv_timer_avp", "inv_timeout") > >> modparam("permissions", "default_allow_file", > >> "/etc/openser/permissions.allow") > >> modparam("permissions", "db_mode", 1) > >> modparam("dispatcher", "flags", 2 ) > >> modparam("acc", "db_flag", 1) > >> modparam("acc", "db_missed_flag", 2) > >> modparam("acc", "log_flag", 1) > >> modparam("acc", "log_missed_flag", 2) > >> > >> modparam("dispatcher", "cnt_avp_id", 4) > >> > >> modparam("avpops","avp_table","gw_avail_port") > >> > >> modparam("dialog", "enable_stats", 1) > >> > >> modparam("dialog","dlg_flag",3) > >> > >> > >> ..... > >> > >> > >> > >> if (avp_check("$DLG_count", "gt/i:10")) { > >> sl_send_reply("403","no more calls accepted"); > >> exit; > >> } > >> > >> But I get the following error when I try to call and it > doesn't work: > >> > >> > >> 8(4826) xl_get_spec_value: error - null sp->itf > >> 8(4826) ERROR:avpops:ops_check_avp: cannot get src value > >> > >> My Openser version is 1.1.1 > >> > >> Thanks > >>

Hi,

$DLG_count works fine now. But I've seen that it contains just the active_calls. I need to count the early calls too, because I need to limit all calls, including the call attempts. There is a counter for that?

However, I'm trying to do it manually, with a counter that increases with each INVITE, and decreases with each BYE, CANCEL, etc. But, I've find a trouble. I don't know how initialize this counter before the "route" code. If I initializes it inside the "route" code, I will initialize this counter for each call, and I don't want to do that. And if I doesn't initialize before the counter I cannot increase or decrease the "avpops" variable that I use for the counter.

Thanks in advance,

Sergi

Bogdan-Andrei Iancu wrote:

Perfect - let me know if the problem persists with 1.2 version.

regards, bogdan

[ACTIVENDY] NOC wrote:

...

Hi,

I'll try to upgrade to 1.2 to solve the problem.

Thanks,

Sergi

Bogdan-Andrei Iancu wrote:

...

I see ...will it be an issue if you upgrade to 1.2 ?

regards, bogdan

[ACTIVENDY] NOC wrote:

...

Hi,

When I place a call and I use the "openserctl fifo dlg_list" command I see one call. But I log the "$dlg_count" value and it's always 0.

Thanks,

Sergi

Bogdan-Andrei Iancu wrote:

...

Hi Sergi,

Try first to see if the dialogs are really monitored - use the fifo command dlg_list to see the active calls: openserctl fifo dlg_list

(of course, you need to have ongoing calls in order to see something).

btw, the variable is $dlg_count

regards, Bogdan

[ACTIVENDY] NOC wrote:

...

I've changed it and now I doesn't get any error. But I configured my Openser like that:

if (avp_check("$DLG_count", "gt/i:0")) { sl_send_reply("403","no more calls accepted"); exit; }

I supose that now I cannot call because when I will try to call (one call greater than zero) I will get "403 no more calls accepted". But it doesn't work, I can call normally.

I try to configure too the dlg_flag:

modparam("dialog","dlg_flag",3)

and if sip method is INVITE:

setflag(3)

What I have to do to limit the simultaneous calls?

Thanks in advance,

Sergi

Ovidiu Sas wrote: > No you are not. You are using the one that is available for > 1.2, not for 1.1. > $dlg_count != $DLG_count > Check the documentation for the right openser version. > > > Regards, > Ovidiu Sas > > On 7/4/07, [ACTIVENDY] NOC noc@activendy.com wrote: >> I'm using it, as you can see in my configuration file. But when >> I try to >> call I get this error: >> >> 8(4826) xl_get_spec_value: error - null sp->itf >> 8(4826) ERROR:avpops:ops_check_avp: cannot get src value >> >> Thanks in advance, >> >> Sergi >> >> Ovidiu Sas wrote: >> > You need to use $dlg_count with openser 1.1. >> > http://www.openser.org/docs/modules/1.1.x/dialog.html#AEN167 >> > >> > >> > Regards, >> > Ovidiu Sas >> > >> > On 7/4/07, [ACTIVENDY] NOC noc@activendy.com wrote: >> >> Hi, >> >> >> >> I want to limit the simultaneous calls on my Openser server. >> I use this >> >> code to limit the calls: >> >> >> >> ..... >> >> >> >> isten=xxx.xxx.xxx.xxx >> >> listen=xxx.xxx.xxx.xxx. # put your server IP address >> here >> >> port=5060 >> >> children=4 >> >> >> >> dns=no >> >> rev_dns=no >> >> fifo="/tmp/openser_fifo" >> >> fifo_db_url="mysql://xxxxxxxxxxxxxx >> >> >> >> loadmodule "/usr/lib/openser/modules/mysql.so" >> >> loadmodule "/usr/lib/openser/modules/sl.so" >> >> loadmodule "/usr/lib/openser/modules/tm.so" >> >> loadmodule "/usr/lib/openser/modules/rr.so" >> >> loadmodule "/usr/lib/openser/modules/maxfwd.so" >> >> loadmodule "/usr/lib/openser/modules/usrloc.so" >> >> loadmodule "/usr/lib/openser/modules/registrar.so" >> >> loadmodule "/usr/lib/openser/modules/uri_db.so" >> >> loadmodule "/usr/lib/openser/modules/auth.so" >> >> loadmodule "/usr/lib/openser/modules/auth_db.so" >> >> loadmodule "/usr/lib/openser/modules/uri.so" >> >> loadmodule "/usr/lib/openser/modules/domain.so" >> >> loadmodule "/usr/lib/openser/modules/textops.so" >> >> loadmodule "/usr/lib/openser/modules/avpops.so" >> >> loadmodule "/usr/lib/openser/modules/xlog.so" >> >> loadmodule "/usr/lib/openser/modules/dispatcher.so" >> >> loadmodule "/usr/lib/openser/modules/permissions.so" >> >> loadmodule "/usr/lib/openser/modules/acc.so" >> >> loadmodule "/usr/lib/openser/modules/dialog.so" >> >> >> >> modparam("dispatcher", "list_file", >> "/etc/openser/dispatcher.list") >> >> modparam("acc|auth_db|uri_db|usrloc|permissions", "db_url", >> >> "mysql://xxxxxxxxxxx") >> >> modparam("avpops","db_url","mysql://xxxxxxxxxxxxxxxx) >> >> modparam("auth_db", "calculate_ha1", 1) >> >> modparam("auth_db", "password_column", "password") >> >> modparam("usrloc", "db_mode", 2) >> >> modparam("rr", "enable_full_lr", 1) >> >> modparam("tm", "wt_timer", 30) >> >> modparam("tm", "fr_timer", 2) >> >> modparam("tm", "fr_inv_timer", 120) >> >> #modparam("tm", "fr_inv_timer_avp", "inv_timeout") >> >> modparam("permissions", "default_allow_file", >> >> "/etc/openser/permissions.allow") >> >> modparam("permissions", "db_mode", 1) >> >> modparam("dispatcher", "flags", 2 ) >> >> modparam("acc", "db_flag", 1) >> >> modparam("acc", "db_missed_flag", 2) >> >> modparam("acc", "log_flag", 1) >> >> modparam("acc", "log_missed_flag", 2) >> >> >> >> modparam("dispatcher", "cnt_avp_id", 4) >> >> >> >> modparam("avpops","avp_table","gw_avail_port") >> >> >> >> modparam("dialog", "enable_stats", 1) >> >> >> >> modparam("dialog","dlg_flag",3) >> >> >> >> >> >> ..... >> >> >> >> >> >> >> >> if (avp_check("$DLG_count", "gt/i:10")) { >> >> sl_send_reply("403","no more calls accepted"); >> >> exit; >> >> } >> >> >> >> But I get the following error when I try to call and it >> doesn't work: >> >> >> >> >> >> 8(4826) xl_get_spec_value: error - null sp->itf >> >> 8(4826) ERROR:avpops:ops_check_avp: cannot get src value >> >> >> >> My Openser version is 1.1.1 >> >> >> >> Thanks >> >>