13 Dec
2005
13 Dec
'05
7:55 a.m.
Normally I would call a statement like:
If (uri=^sip:123456@somewhere.com)
{
..do something
}
I would like to implement a dial plan using the "From:" header.
i.e.:
If (from_uri=^sip:123456@somewhere.com)
{
..do something
}
Anyone know if something like this exists?
Leo P.
13 Dec
13 Dec
8:19 a.m.
There are a couple of things you COULD do.
You could use search().... like...
if(search("^From: something"))
...
That could be a little tricky with getting the formatting correct, but is doable.
You could also use AVPs...
avp_write("$from", "i:19");
if(avp_check("i:19", "eq/1234(a)somewhere.com/i"))
...
Don't trust me on exact syntax, though, but that's the idea.
N.
On Tue, 13 Dec 2005 07:55:49 -0500, Leo Papadopoulos wrote
Normally I would call a statement like:
If (uri=^sip:123456@somewhere.com)
{
..do something
}
I would like to implement a dial plan using the "From:" header.
i.e.:
If (from_uri=^sip:123456@somewhere.com)
{
..do something
}
Anyone know if something like this exists?
Leo P.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
8:32 a.m.
but will you check each From: or will there be a regex for them, if in
groups I suggest is_usr_in setting, and then setflag, and then route
Iqbal
sip wrote:
There are a couple of things you COULD do.
You could use search().... like...
if(search("^From: something"))
...
That could be a little tricky with getting the formatting correct, but is doable.
You could also use AVPs...
avp_write("$from", "i:19");
if(avp_check("i:19", "eq/1234(a)somewhere.com/i"))
...
Don't trust me on exact syntax, though, but that's the idea.
N.
On Tue, 13 Dec 2005 07:55:49 -0500, Leo Papadopoulos wrote
Normally I would call a statement like:
If (uri=^sip:123456@somewhere.com)
{
..do something
}
I would like to implement a dial plan using the "From:" header.
i.e.:
If (from_uri=^sip:123456@somewhere.com)
{
..do something
}
Anyone know if something like this exists?
Leo P.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
.
8:45 a.m.
Right.... but this assumes it's a local user and he has control over that info.
If the user's not local, you're sort of limited in what you can test for.
N.
On Tue, 13 Dec 2005 13:32:49 +0000, Iqbal wrote
but will you check each From: or will there be a regex
for them, if
in groups I suggest is_usr_in setting, and then setflag, and then route
Iqbal
sip wrote:
>There are a couple of things you COULD do.
>
>You could use search().... like...
>
>if(search("^From: something"))
>...
>
>That could be a little tricky with getting the formatting correct, but is
doable.
>
>You could also use AVPs...
>
>avp_write("$from", "i:19");
>if(avp_check("i:19", "eq/1234(a)somewhere.com/i"))
>...
>
>
>Don't trust me on exact syntax, though, but that's the idea.
>
>N.
>
>
>On Tue, 13 Dec 2005 07:55:49 -0500, Leo Papadopoulos wrote
>
>
>>Normally I would call a statement like:
>>
>>If (uri=^sip:123456@somewhere.com)
>> {
>> ..do something
>> }
>>
>>I would like to implement a dial plan using the "From:" header.
>>
>>i.e.:
>>If (from_uri=^sip:123456@somewhere.com)
>> {
>> ..do something
>> }
>>
>>Anyone know if something like this exists?
>>
>>Leo P.
>>
>>_______________________________________________
>>Serusers mailing list
>>serusers(a)lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>.
>
>
>
8:48 a.m.
true...but then if remote users, i.e interconnect with other voip
providers, better to use trusted tables I think...opinions
iqbal
sip wrote:
Right.... but this assumes it's a local user and he
has control over that info.
If the user's not local, you're sort of limited in what you can test for.
N.
On Tue, 13 Dec 2005 13:32:49 +0000, Iqbal wrote
but will you check each From: or will there be a
regex for them, if
in groups I suggest is_usr_in setting, and then setflag, and then route
Iqbal
sip wrote:
>There are a couple of things you COULD do.
>
>You could use search().... like...
>
>if(search("^From: something"))
>...
>
>That could be a little tricky with getting the formatting correct, but is
>
>
doable.
>You could also use AVPs...
>
>avp_write("$from", "i:19");
>if(avp_check("i:19", "eq/1234(a)somewhere.com/i"))
>...
>
>
>Don't trust me on exact syntax, though, but that's the idea.
>
>N.
>
>
>On Tue, 13 Dec 2005 07:55:49 -0500, Leo Papadopoulos wrote
>
>
>
>
>>Normally I would call a statement like:
>>
>>If (uri=^sip:123456@somewhere.com)
>> {
>> ..do something
>> }
>>
>>I would like to implement a dial plan using the "From:" header.
>>
>>i.e.:
>>If (from_uri=^sip:123456@somewhere.com)
>> {
>> ..do something
>> }
>>
>>Anyone know if something like this exists?
>>
>>Leo P.
>>
>>_______________________________________________
>>Serusers mailing list
>>serusers(a)lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>>
>>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>.
>
>
>
>
>
.
3:08 p.m.
New subject: [Serusers] How can I change dial rulesbased on From:' headerinstead of R-RURI?
Dear Iqbal & sip@arcdiv,
Thank you for the excellent input.
I like the idea of using groups since it seems very simple. I could also
write a CRON job that updates the groups table based on who is presently
registered in the registration table. This way the group table will also
represent who is registered. This will allow me to NOT route at all unless
the from: header is registered.
By the way, I do have control over the endpoints. While I can't guarantee
that no one is "spoofing" the "From:" header, this is good enough for
now.
I am hesitant with AVP's because I know very little about them, however,
they do look very popular. I need to figure out how I can learn them a
little better. I have been to the AVP website at Voice Systems, but it seems
to be geared towards OPENSER and I am not using that presently. I am still
on SER 0.9.4 and I plan on staying there for the near future.
Leo P.
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Iqbal
Sent: Tuesday, December 13, 2005 8:48 AM
To: sip
Cc: 'SER-Users'; Leo Papadopoulos
Subject: Re: [Serusers] How can I change dial rulesbased on From:'
headerinstead of R-RURI?
true...but then if remote users, i.e interconnect with other voip
providers, better to use trusted tables I think...opinions
iqbal
sip wrote:
Right.... but this assumes it's a local user and he
has control over that
info.
If the user's not local, you're sort of limited in what you can test for.
N.
On Tue, 13 Dec 2005 13:32:49 +0000, Iqbal wrote
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
but will you check each From: or will there be a
regex for them, if
in groups I suggest is_usr_in setting, and then setflag, and then route
Iqbal
sip wrote:
>There are a couple of things you COULD do.
>
>You could use search().... like...
>
>if(search("^From: something"))
>...
>
>That could be a little tricky with getting the formatting correct, but is
>
>
doable.
>You could also use AVPs...
>
>avp_write("$from", "i:19");
>if(avp_check("i:19", "eq/1234(a)somewhere.com/i"))
>...
>
>
>Don't trust me on exact syntax, though, but that's the idea.
>
>N.
>
>
>On Tue, 13 Dec 2005 07:55:49 -0500, Leo Papadopoulos wrote
>
>
>
>
>>Normally I would call a statement like:
>>
>>If (uri=^sip:123456@somewhere.com)
>> {
>> ..do something
>> }
>>
>>I would like to implement a dial plan using the "From:" header.
>>
>>i.e.:
>>If (from_uri=^sip:123456@somewhere.com)
>> {
>> ..do something
>> }
>>
>>Anyone know if something like this exists?
>>
>>Leo P.
>>
>>_______________________________________________
>>Serusers mailing list
>>serusers(a)lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>>
>>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>.
>
>
>
>
>
.
14 Dec
14 Dec
8:06 a.m.
New subject: [Serusers] How can I change dial rulesbased on From:' headerinstead of R-RURI?
AVPs can be rather daunting. Hell... it ALL can. The issue, of course, is that
the help pages are written by programmers for programmers and so making sense
out of it all can be a little hair-thinning for the rest of us.
If you need some help, though... let me know. I've spent a good portion of
time trying to wrap my brain around some of the concepts here so I can really
understand what I'm doing and not just copy blocks of code from here and there.
Your FINEST resource for actual human-readable information about the whole
server setup, though, is the getting started documents at Onsip.org. The guys
there have REALLY put some time and effort into creating documentation that
makes sense and is laid out well. I can't recommend it enough.
N.
On Tue, 13 Dec 2005 15:08:14 -0500, Leo wrote
Dear Iqbal & sip@arcdiv,
Thank you for the excellent input.
I like the idea of using groups since it seems very simple. I could also
write a CRON job that updates the groups table based on who is presently
registered in the registration table. This way the group table will also
represent who is registered. This will allow me to NOT route at all unless
the from: header is registered.
By the way, I do have control over the endpoints. While I can't guarantee
that no one is "spoofing" the "From:" header, this is good enough
for now.
I am hesitant with AVP's because I know very little about them,
however, they do look very popular. I need to figure out how I can
learn them a little better. I have been to the AVP website at Voice
Systems, but it seems to be geared towards OPENSER and I am not
using that presently. I am still on SER 0.9.4 and I plan on staying
there for the near future.
Leo P.
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]
On Behalf Of Iqbal Sent: Tuesday, December 13, 2005 8:48 AM To: sip
Cc: 'SER-Users'; Leo Papadopoulos Subject: Re: [Serusers] How can I
change dial rulesbased on From:' headerinstead of R-RURI?
true...but then if remote users, i.e interconnect with other voip
providers, better to use trusted tables I think...opinions
iqbal
sip wrote:
Right.... but this assumes it's a local user
and he has control over that
info.
If the user's not local, you're sort of limited in what you can test for.
N.
On Tue, 13 Dec 2005 13:32:49 +0000, Iqbal wrote
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers but will you check each From: or will there be a
regex for them, if
in groups I suggest is_usr_in setting, and then setflag, and then route
Iqbal
sip wrote:
>There are a couple of things you COULD do.
>
>You could use search().... like...
>
>if(search("^From: something"))
>...
>
>That could be a little tricky with getting the formatting correct, but is
>
>
doable.
>You could also use AVPs...
>
>avp_write("$from", "i:19");
>if(avp_check("i:19", "eq/1234(a)somewhere.com/i"))
>...
>
>
>Don't trust me on exact syntax, though, but that's the idea.
>
>N.
>
>
>On Tue, 13 Dec 2005 07:55:49 -0500, Leo Papadopoulos wrote
>
>
>
>
>>Normally I would call a statement like:
>>
>>If (uri=^sip:123456@somewhere.com)
>> {
>> ..do something
>> }
>>
>>I would like to implement a dial plan using the "From:" header.
>>
>>i.e.:
>>If (from_uri=^sip:123456@somewhere.com)
>> {
>> ..do something
>> }
>>
>>Anyone know if something like this exists?
>>
>>Leo P.
>>
>>_______________________________________________
>>Serusers mailing list
>>serusers(a)lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>>
>>
>_______________________________________________
>Serusers mailing list
>serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>.
>
>
>
>
>
.
5:23 p.m.
New subject: [Serusers] How can I change dial rulesbased on From:' headerinstead of R-RURI?
Thanks I have checked out ONSIP for setting up SER and making my ser.cfg
files. I will look for AVP documentation too.
-----Original Message-----
From: sip [mailto:sip@arcdiv.com]
Sent: Wednesday, December 14, 2005 8:07 AM
To: Leo; 'Iqbal'
Cc: 'SER-Users'
Subject: RE: [Serusers] How can I change dial rulesbased on From:'
headerinstead of R-RURI?
AVPs can be rather daunting. Hell... it ALL can. The issue, of course, is
that
the help pages are written by programmers for programmers and so making
sense
out of it all can be a little hair-thinning for the rest of us.
If you need some help, though... let me know. I've spent a good portion of
time trying to wrap my brain around some of the concepts here so I can
really
understand what I'm doing and not just copy blocks of code from here and
there.
Your FINEST resource for actual human-readable information about the whole
server setup, though, is the getting started documents at Onsip.org. The
guys
there have REALLY put some time and effort into creating documentation that
makes sense and is laid out well. I can't recommend it enough.
N.
On Tue, 13 Dec 2005 15:08:14 -0500, Leo wrote
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Dear Iqbal & sip@arcdiv,
Thank you for the excellent input.
I like the idea of using groups since it seems very simple. I could also
write a CRON job that updates the groups table based on who is presently
registered in the registration table. This way the group table will also
represent who is registered. This will allow me to NOT route at all unless
the from: header is registered.
By the way, I do have control over the endpoints. While I can't guarantee
that no one is "spoofing" the "From:" header, this is good enough
for now.
I am hesitant with AVP's because I know very little about them,
however, they do look very popular. I need to figure out how I can
learn them a little better. I have been to the AVP website at Voice
Systems, but it seems to be geared towards OPENSER and I am not
using that presently. I am still on SER 0.9.4 and I plan on staying
there for the near future.
Leo P.
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]
On Behalf Of Iqbal Sent: Tuesday, December 13, 2005 8:48 AM To: sip
Cc: 'SER-Users'; Leo Papadopoulos Subject: Re: [Serusers] How can I
change dial rulesbased on From:' headerinstead of R-RURI?
true...but then if remote users, i.e interconnect with other voip
providers, better to use trusted tables I think...opinions
iqbal
sip wrote:
Right.... but this assumes it's a local user
and he has control over that
info.
>
>If the user's not local, you're sort of limited in what you can test for.
>
>N.
>
>On Tue, 13 Dec 2005 13:32:49 +0000, Iqbal wrote
>
>
>>but will you check each From: or will there be a regex for them, if
>>in groups I suggest is_usr_in setting, and then setflag, and then route
>>
>>Iqbal
>>
>>sip wrote:
>>
>>
>>
>>>There are a couple of things you COULD do.
>>>
>>>You could use search().... like...
>>>
>>>if(search("^From: something"))
>>>...
>>>
>>>That could be a little tricky with getting the formatting correct, but
is
>
>
doable.
>>You could also use AVPs...
>>
>>avp_write("$from", "i:19");
>>if(avp_check("i:19", "eq/1234(a)somewhere.com/i"))
>>...
>>
>>
>>Don't trust me on exact syntax, though, but that's the idea.
>>
>>N.
>>
>>
>>On Tue, 13 Dec 2005 07:55:49 -0500, Leo Papadopoulos wrote
>>
>>
>
>
>>>Normally I would call a statement like:
>>>
>>>If (uri=^sip:123456@somewhere.com)
>>> {
>>> ..do something
>>> }
>>>
>>>I would like to implement a dial plan using the "From:" header.
>>>
>>>i.e.:
>>>If (from_uri=^sip:123456@somewhere.com)
>>> {
>>> ..do something
>>> }
>>>
>>>Anyone know if something like this exists?
>>>
>>>Leo P.
>>>
>>>_______________________________________________
>>>Serusers mailing list
>>>serusers(a)lists.iptel.org
>>>http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>>>
>>>
>>_______________________________________________
>>Serusers mailing list
>>serusers(a)lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>>.
>>
>>
>>
>
>
.
6745
days inactive
6746
days old
7 comments
4 participants
participants (4)
-
Iqbal -
Leo -
Leo Papadopoulos -
sip