hi, all: I want to make a client to send the REGISTER update message in a short time, which is used to prevent the NAT device to close the port for the client. So I want to rewrite the reply message for REGISTER and change the expire parameter to a value of my setting. How can I achieve this? Thanks.
andy.yang
2007/04/10
Hi Andy,
You don't need to rewrite the reply message. Just set the value that you want: http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN103
Best Regards, Ovidiu Sas
On 4/9/07, 杨冬 wintersun1981@gmail.com wrote:
hi, all: I want to make a client to send the REGISTER update message in a short time, which is used to prevent the NAT device to close the port for the client. So I want to rewrite the reply message for REGISTER and change the expire parameter to a value of my setting. How can I achieve this? Thanks.
andy.yang
2007/04/10
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
hi, Ovidiu: I know your meaning, but I don't want to change the value for normal client REGISTER message which is not behind a NAT device. For a REGISTER request, if it is tested to be behind a NAT device with client_nat_test, then I want to change the value of reply. Can u give some more suggestions? Thanks very much!
andy.yang 2007/04/10
2007/4/10, Ovidiu Sas sip.nslu@gmail.com:
Hi Andy,
You don't need to rewrite the reply message. Just set the value that you want: http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN103
Best Regards, Ovidiu Sas
On 4/9/07, 杨冬 wintersun1981@gmail.com wrote:
hi, all: I want to make a client to send the REGISTER update message in a short time, which is used to prevent the NAT device to close the port for the client. So I want to rewrite the reply message for REGISTER and change the expire parameter to a value of my setting. How can I achieve this? Thanks.
andy.yang
2007/04/10
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Andy,
if I understand correctly, you want the same functionality, but with per-register controllability, right?
regards, bogdan
杨冬 wrote:
hi, Ovidiu: I know your meaning, but I don't want to change the value for normal client REGISTER message which is not behind a NAT device. For a REGISTER request, if it is tested to be behind a NAT device with client_nat_test, then I want to change the value of reply. Can u give some more suggestions? Thanks very much!
andy.yang 2007/04/10
2007/4/10, Ovidiu Sas sip.nslu@gmail.com:
Hi Andy,
You don't need to rewrite the reply message. Just set the value that you want: http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN103
Best Regards, Ovidiu Sas
On 4/9/07, 杨冬 wintersun1981@gmail.com wrote:
hi, all: I want to make a client to send the REGISTER update message in a short time, which is used to prevent the NAT device to close the port for the client. So I want to rewrite the reply message for REGISTER and change the expire parameter to a value of my setting. How can I achieve this? Thanks.
andy.yang
2007/04/10
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi, Bogdan: Yes, you got it. I mean whether there is a function or pseudo variables which can update it. So I can control the interval of REGISTER message per-client. Thanks for your attention.
-----邮件原件----- 发件人: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] 发送时间: 2007年4月11日 16:04 收件人: 杨冬 抄送: Ovidiu Sas; users@openser.org 主题: Re: [Users] How to change the expire parameter in a reply message of REGISTER?
Hi Andy,
if I understand correctly, you want the same functionality, but with per-register controllability, right?
regards, bogdan
杨冬 wrote:
hi, Ovidiu: I know your meaning, but I don't want to change the value for normal client REGISTER message which is not behind a NAT device. For a REGISTER request, if it is tested to be behind a NAT device with client_nat_test, then I want to change the value of reply. Can u give some more suggestions? Thanks very much!
andy.yang 2007/04/10
2007/4/10, Ovidiu Sas sip.nslu@gmail.com:
Hi Andy,
You don't need to rewrite the reply message. Just set the value that you want: http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN103
Best Regards, Ovidiu Sas
On 4/9/07, 杨冬 wintersun1981@gmail.com wrote:
hi, all: I want to make a client to send the REGISTER update message in a short time, which is used to prevent the NAT device to close the port for the client. So I want to rewrite the reply message for REGISTER and change the expire parameter to a value of my setting. How can I achieve this? Thanks.
andy.yang
2007/04/10
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
You can also use openser flags http://www.openser.org/dokuwiki/doku.php/tutorials:openser-flag-operations
On 4/12/07, 杨冬 wintersun1981@gmail.com wrote:
Hi, Bogdan: Yes, you got it. I mean whether there is a function or pseudo variables which can update it. So I can control the interval of REGISTER message per-client. Thanks for your attention.
-----邮件原件----- 发件人: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] 发送时间: 2007年4月11日 16:04 收件人: 杨冬 抄送: Ovidiu Sas; users@openser.org 主题: Re: [Users] How to change the expire parameter in a reply message of REGISTER?
Hi Andy,
if I understand correctly, you want the same functionality, but with per-register controllability, right?
regards, bogdan
杨冬 wrote:
hi, Ovidiu: I know your meaning, but I don't want to change the value for normal client REGISTER message which is not behind a NAT device. For a REGISTER request, if it is tested to be behind a NAT device with client_nat_test, then I want to change the value of reply. Can u give some more suggestions? Thanks very much!
andy.yang 2007/04/10
2007/4/10, Ovidiu Sas sip.nslu@gmail.com:
Hi Andy,
You don't need to rewrite the reply message. Just set the value that you want: http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN103
Best Regards, Ovidiu Sas
On 4/9/07, 杨冬 wintersun1981@gmail.com wrote:
hi, all: I want to make a client to send the REGISTER update message in a short time, which is used to prevent the NAT device to close the port for the client. So I want to rewrite the reply message for REGISTER and change the expire parameter to a value of my setting. How can I achieve this? Thanks.
andy.yang
2007/04/10
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Andy,
unfortunately there is no such possibility yet - only a global option. Please open a feature request on the project tracker.
regards, bogdan
杨冬 wrote:
Hi, Bogdan: Yes, you got it. I mean whether there is a function or pseudo variables which can update it. So I can control the interval of REGISTER message per-client. Thanks for your attention.
-----邮件原件----- 发件人: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] 发送时间: 2007年4月11日 16:04 收件人: 杨冬 抄送: Ovidiu Sas; users@openser.org 主题: Re: [Users] How to change the expire parameter in a reply message of REGISTER?
Hi Andy,
if I understand correctly, you want the same functionality, but with per-register controllability, right?
regards, bogdan
杨冬 wrote:
hi, Ovidiu: I know your meaning, but I don't want to change the value for normal client REGISTER message which is not behind a NAT device. For a REGISTER request, if it is tested to be behind a NAT device with client_nat_test, then I want to change the value of reply. Can u give some more suggestions? Thanks very much!
andy.yang 2007/04/10
2007/4/10, Ovidiu Sas sip.nslu@gmail.com:
Hi Andy,
You don't need to rewrite the reply message. Just set the value that you want: http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN103
Best Regards, Ovidiu Sas
On 4/9/07, 杨冬 wintersun1981@gmail.com wrote:
hi, all: I want to make a client to send the REGISTER update message in a short time, which is used to prevent the NAT device to close the port for the client. So I want to rewrite the reply message for REGISTER and change the expire parameter to a value of my setting. How can I achieve this? Thanks.
andy.yang
2007/04/10
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
Bogdan-Andrei Iancu -
Kirill Kudin -
Ovidiu Sas -
杨冬