trytry02,

I do not understand your question, however, you should download the Getting Started document from http://www.onsip.org/ for a good reference configuration.

Regards, Paul

On 9/23/05, 송 미진 trytry02@hotmail.com wrote:

confirm 83b7fb1612811c64f85f47a6046dd84dea286d15

Dear. All Hi~ I was adviced many times by "seruser" but my problems has not been solved. I,m afraid that I have many questions. So I intend to specify my present situation.

Operating System: Linux Fedora 3

================================================================================

[root@cse3 ~]# serctl start

Starting SER : started pid(8370)

[root@cse3 ~]# serctl ps 0 8370 attendant 1 8375 fifo server 2 8377 receiver child=0 sock= 127.0.0.1:5060 3 8379 receiver child=1 sock= 127.0.0.1:5060 4 8384 receiver child=2 sock= 127.0.0.1:5060 5 8386 receiver child=3 sock= 127.0.0.1:5060 6 8387 receiver child=0 sock= 192.168.178.193:5060 7 8390 receiver child=1 sock= 192.168.178.193:5060 8 8393 receiver child=2 sock= 192.168.178.193:5060 9 8397 receiver child=3 sock= 192.168.178.193:5060 10 8401 timer 11 8403 tcp receiver 12 8406 tcp receiver 13 8410 tcp receiver 14 8412 tcp receiver 15 8415 tcp main process

==============================================================================

my_ip: 192.168.178.193 sip_uri: sip:hjkim@192.168.178.193

I added my hostname and my ip address in /etc/host file. And I added alias="hostname.myserver.sampro.cse" alias="192.168.178.193" in /usr/local/etc/ser/ser.cfg file.

==================================== 1

[root@cse3 ~]# serctl ping sip:hjkim@192.168.178.193 [1]+ Done cat <$path | filter_fl 483

===========================================================================================

==================================== 2

I received "SIP/2.0 483 Too Many Hops" . but I don't know the reason.

Well...My computer is connected other computers including computer has 192.168.178.194 as ip address. And my /etc/host file has

127.0.0.1 cse4 localhost.localdomain localhost 192.168.178.194 kims myserver.sampro.cse

Is there reason in here??? I don't know .

===========================================================================================

[root@cse3 ~]# sipsak -T -s sip:hjkim@192.168.178.193 warning: IP extract from warning activated to be more informational 0: 192.168.178.193 (0.355 ms) SIP/2.0 483 Too Many Hops 1: 192.168.178.193 (0.982 ms) SIP/2.0 483 Too Many Hops 2: 192.168.178.193 (0.459 ms) SIP/2.0 483 Too Many Hops 3: 192.168.178.193 (0.520 ms) SIP/2.0 483 Too Many Hops ....................

177: timeout after 500 ms 177: timeout after 1000 ms 177: timeout after 2000 ms 177: 192.168.178.193 (3306.067 ms) SIP/2.0 483 Too Many Hops 178: 192.168.178.193 (3.073 ms) SIP/2.0 483 Too Many Hops 179: 192.168.178.193 (3.104 ms) SIP/2.0 483 Too Many Hops ..................

313: 192.168.178.193 (3.345 ms) SIP/2.0 483 Too Many Hops 314: 192.168.178.193 (3.494 ms) SIP/2.0 483 Too Many Hops 315: 192.168.178.193 (3.038 ms) SIP/2.0 483 Too Many Hops 316: 192.168.178.193 (3.518 ms) SIP/2.0 483 Too Many Hops 317: 192.168.178.193 (5.048 ms) SIP/2.0 500 I'm terribly sorry, server error occurred (1/SL) without Contact header

============================================================================================

======================================== 3

In response part, I found the message "SIP/2.0 401 Unauthorized" and "authorization failed request already contains (Proxy-) Authorization, but received 40[1|7], see above" What happened??

============================================================================================

[root@cse3 ~]# sipsak -U -vv -s sip:hjkim@192.168.178.193 warning: ignoring -i option when in usrloc mode registering user hjkim... authorizing registering user hjkim... request: REGISTER sip:192.168.178.193 SIP/2.0 Authorization: Digest username="hjkim", uri="sip:192.168.178.193", algorithm=MD5, realm="myserver.sampro.cse", nonce="4333e4b8b0199c2d9c0f8bd249bedc3b8b20bf87", response="f58e11aff01e5123bcf5010405e91278" Via: SIP/2.0/UDP 127.0.0.1:32860;branch=z9hG4bK.4f28e7fb;rport From: sip:hjkim@192.168.178.193;tag=4de59540 To: sip:hjkim@192.168.178.193 Call-ID: 1306891584@127.0.0.1 CSeq: 2 REGISTER Content-Length: 0 Max-Forwards: 70 User-Agent: sipsak 0.9.1 Expires: 15 Contact: sip:hjkim@127.0.0.1:32860

response: SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 127.0.0.1:32860;branch=z9hG4bK.4f28e7fb;rport=32860;received=192.168.178.193

From: sip:hjkim@192.168.178.193;tag=4de59540 To: sip:hjkim@192.168.178.193;tag=b27e1a1d33761e85846fc98f5f3a7e58.ad3a Call-ID: 1306891584@127.0.0.1 CSeq: 2 REGISTER WWW-Authenticate: Digest realm="myserver.sampro.cse", nonce="4333e4b8b0199c2d9c0f8bd249bedc3b8b20bf87" Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 192.168.178.193:5060 "Noisy feedback tells: pid=8397 req_src_ip=192.168.178.193 req_src_port=32860 in_uri=sip:192.168.178.193 out_uri=sip:192.168.178.193 via_cnt==1"

error: authorization failed request already contains (Proxy-) Authorization, but received 40[1|7], see above

============================================================================================

[root@cse3 ~]# serctl ul show Dumping all contacts may take long: are you sure you want to proceed? [Y|N] y ===Domain list=== ---Domain--- name : 'aliases' size : 512 table: 0xf50b44c8 d_ll { n : 0 first: (nil) last : (nil) } ---/Domain--- ---Domain--- name : 'location' size : 512 table: 0xf50b2218 d_ll { n : 2 first: 0xf50b4220 last : 0xf50b4348 }

...Record(0xf50b4220)... domain: 'location' aor : 'kim'

domain    : 'location'
aor       : 'kim'
Contact   : 'sip:hjkim@myserver.sampro.cse'
Expires   : Permanent
q         : 1
Call-ID   :
'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything'
CSeq      : 42
User-Agent: 'SIP Express Router FIFO'
received  : ''
State     : CS_SYNC
Flags     : 128
next      : (nil)
prev      : (nil)
~~~/Contact~~~~
.../Record...
...Record(0xf50b4348)...
domain: 'location'
aor   : 'mj'
~~~Contact(0xf50b4388)~~~
domain    : 'location'
aor       : 'mj'
Contact   : 'sip:mj@myserver.sampro.cse'
Expires   : Permanent
q         : 1
Call-ID   :
'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything'
CSeq      : 42
User-Agent: 'SIP Express Router FIFO'
received  : ''
State     : CS_SYNC
Flags     : 128
next      : (nil)
prev      : (nil)
~~~/Contact~~~~
.../Record...

---/Domain---
===/Domain list===


====================================================================================================================================
          4          =====================================

I received the message "received ICMP packet (type: 3, code: 10): from
192.168.178.194"
What does means this message??


============================================================================================


[root@cse3 ~]# sipsak -T -vv -s sip:iptel@192.168.178.194
warning: IP extract from warning activated to be more informational
Max-Forwards set to 0

received ICMP packet (type: 3, code: 10): from 192.168.178.194


=======================================================
=======================================================
 <<  my ser.cfg   >>


 #
# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)

alias="192.168.178.193"
alias="myserver.sampro.cse"
alias="kims.myserver.sampro.cse"


/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/

check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >=  2000048 ) {
sl_send_reply("513", "Message too big");
break;
};


# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER") record_route();

# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};

if (!uri=="sip:192.168.178.193") {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};

# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri=="sip:192.168.178.193") {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
if (!www_authorize("myserver.sampro.cse", "subscriber")) {
www_challenge("myserver.sampro.cse", "0");
break;
};


save("location");
log(1, "save \n");
break;
};

lookup("aliases");
if (!uri=="sip:192.168.178.193") {
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
};

# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}

route[1]
{
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}



######################################################################################



I'd appreciate it if you would give me some solutions.
Thank you in advance.....

mi-jin Song

_________________________________________________________________
행운의 주인공이 이번엔 나일꺼야, 진짜루... 인터넷 복권
http://www.msn.co.kr/money/interlotto/

_______________________________________________
Serusers mailing list
Serusers@iptel.org
http://mail.iptel.org/mailman/listinfo/serusers