24 May
2006
24 May
'06
11:15 p.m.
Hi SER users,
I have a problem. We have two PSTN gateway providers and both of
them needs different prefixes when sending request to their gateway.
For example:
GW1 ---> 3333#<phone number>
GW2 ---> 4444#<phone number>
Now I'll be using these two provider with LCR, but I don't know how
will I accomplish their requirements on their prefixes. Could you
give me any idea about this scenario? Also how can I make LCR to
failover with these gateways?
Please help....
Thanks in advance,
Ryan Pagquil
26 May
26 May
3:01 a.m.
New subject: [Serusers] Two PSTN gateway providers needs different prefix
Hi,
Anyone has any idea on how to do this?
Please help....
Thanks,
Ryan
At 11:15 AM 5/25/2006, Ryan Pagquil wrote:
Hi SER users,
I have a problem. We have two PSTN gateway providers and
both of them needs different prefixes when sending request to their gateway.
For example:
GW1 ---> 3333#<phone number>
GW2 ---> 4444#<phone number>
Now I'll be using these two provider with LCR, but I don't know how
will I accomplish their requirements on their prefixes. Could you
give me any idea about this scenario? Also how can I make LCR to
failover with these gateways?
Please help....
Thanks in advance,
Ryan Pagquil
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
5:22 a.m.
how about this... dont use # key. just append 3333 or 4444 to the number, i.e.
GW1 ---> 3333<phone number>
GW2 ---> 4444<phone number>
if(uri=~"^sip:3333.*") {
strip(4); #if you need to get rid of first 4
digits (i.e. "3333")
t_relay_to_udp("gw1.ip.address", "gw1-port") ;
}
else if(uri=~"^sip:4444.*") {
strip(4); #if you need to get rid of first 4
digits (i.e. "4444")
t_relay_to_udp("GW2.ip.address", "GW2-port");
};
Hope that works out for you.
On 5/26/06, Ryan Pagquil <rpagquil(a)philonline.com> wrote:
Hi,
Anyone has any idea on how to do this?
Please help....
Thanks,
Ryan
At 11:15 AM 5/25/2006, Ryan Pagquil wrote:
Hi SER users,
I have a problem. We have two PSTN gateway providers and
both of them needs different prefixes when sending request to their gateway.
For example:
GW1 ---> 3333#<phone number>
GW2 ---> 4444#<phone number>
Now I'll be using these two provider with LCR, but I don't know how
will I accomplish their requirements on their prefixes. Could you
give me any idea about this scenario? Also how can I make LCR to
failover with these gateways?
Please help....
Thanks in advance,
Ryan Pagquil
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
5:27 a.m.
Take a look at pdt module....it might suit your needs.
Samuel.
2006/5/26, Andrey Kouprianov <andrey.kouprianov(a)gmail.com>om>:
how about this... dont use # key. just append 3333 or
4444 to the number, i.e.
GW1 ---> 3333<phone number>
GW2 ---> 4444<phone number>
if(uri=~"^sip:3333.*") {
strip(4); #if you need to get rid of first 4
digits (i.e. "3333")
t_relay_to_udp("gw1.ip.address", "gw1-port") ;
}
else if(uri=~"^sip:4444.*") {
strip(4); #if you need to get rid of first 4
digits (i.e. "4444")
t_relay_to_udp("GW2.ip.address", "GW2-port");
};
Hope that works out for you.
On 5/26/06, Ryan Pagquil <rpagquil(a)philonline.com> wrote:
Hi,
Anyone has any idea on how to do this?
Please help....
Thanks,
Ryan
At 11:15 AM 5/25/2006, Ryan Pagquil wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi SER users,
I have a problem. We have two PSTN gateway providers and
both of them needs different prefixes when sending request to their gateway.
For example:
GW1 ---> 3333#<phone number>
GW2 ---> 4444#<phone number>
Now I'll be using these two provider with LCR, but I don't know how
will I accomplish their requirements on their prefixes. Could you
give me any idea about this scenario? Also how can I make LCR to
failover with these gateways?
Please help....
Thanks in advance,
Ryan Pagquil
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6574
days inactive
6575
days old
3 comments
3 participants
participants (3)
-
Andrey Kouprianov -
Ryan Pagquil -
samuel