Hello Vik, I have similar setup, try define you server configuration in tls.cfg [server:ip address of alias interface:port of alias interface] method = TLSv1 verify_certificate = no require_certificate = no private_key = certificate = ca_list = crl = Slava ------------------------------ *From: *"Vik Killa" <vipkilla(a)gmail.com> *To: *"sr-users" <sr-users(a)lists.sip-router.org> *Sent: *Wednesday, April 29, 2015 4:32:21 PM *Subject: *[SR-Users] issue with TLS and 2 NIC interfaces Hello, if i have two interfaces (eth0 and eth0:0) I set kamailio to listen to the IP on eth0:0 This works great except when I try using TLS, kamailio routes traffic from eth0:0 to eth0 then to correct destination It should be just doing eth0:0 -> correct destination If I use UDP/TCP I am not seeing this behavior. If I set kamailio to listen to eth0 and remove eth0;0, TLS works fine. I'm running kamailio compiled from source git master a few days ago. Is anyone else having this problem? I'm wondering if it's a bug. Thanks, V _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users