New subject: [Serusers] pstn connectivity

20 Apr 2003

OK.  It sounds like the Softphone is not putting the realm/domain
in the URI.

Which softphone are you using?

-----Original Message-----
From: budi wibowo [mailto:bu1d@yahoo.com]
Sent: Saturday, April 19, 2003 7:29 AM
To: Dan Austin
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] pstn connectivity

yes i have resistered my softphone,
if i connect using the wrong username or the wrong
password i got message like not authorized 
how do i check if my softphoen is registered or not

if i dial to 1136523456(a)111.111.111.111 everything is
normal 

tia

budi

--- Dan Austin &lt;Dan_Austin(a)Phoenix.com&gt; wrote:
...
  Is the softphone configured to register with your
 SER install?

 I've verified the setting in the how-to with MSN
 messenger 4.6
 and a Cisco 7940 converted to use SIP.

 If you have to add the ip address of the gw to the
 request, it
 would seem like your phone might not be registered. 
 What happens
 if you send the call to 1136523456(a)111.111.111.111?

 Dan

 -----Original Message-----
 From: budi wibowo [mailto:bu1d@yahoo.com]
 Sent: Friday, April 18, 2003 7:53 PM
 To: serusers(a)lists.iptel.org
 Subject: Re: [Serusers] pstn connectivity

 - the request sent by the softphone 
 - to check the request on server ..how i do that 
 - i do debug ccsip all on my gateway and i saw
 something uncomplete for the request , like the
 translation rule not work properly 
 but i include the ip of cisco gw eerything is normal
 any clue? or any suggestion which softphone i should
 use?

 boedz

 --- Nils Ohlmeier &lt;nils(a)iptel.org&gt; wrote:
  Sounds like you softphone do not know where to
 send
  a request if you omit the 
 host part. Is the request sent by the softphone if
 you omit the host part? Is 
 the request received at the server? Do the server
 deliver the request if it 
 received it? and so on and on and on...

 Greetings
   Nils

 On Saturday 19 April 2003 04:31, budi wibowo  wrote:
  > dear all i repeat my problem
 > - pc running ser with ip 111.111.111.111
 > - cisco 5350 with dial-peer to sip-server with  ip

222.222.222.222
 - remote pc running sip softphone

 i have read austin how to.. regarding how to  connect
 > to cisco gw
 > but it's not work
 > example ..i want to dial to singapore with  pattern
  113
  if i dial from my softphone 1136523456 it always
 failed, but if dial using  1136523456(a)222.222.222.222
 > it always work .
 > is there anything missing on my config?
 >
 >
 > rgds
 >
 > budi  

 __________________________________________________
 Do you Yahoo!?
 The New Yahoo! Search - Faster. Easier. Bingo
 http://search.yahoo.com

 _______________________________________________
 Serusers mailing list
 serusers(a)lists.iptel.org
 http://lists.iptel.org/mailman/listinfo/serusers 

__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com