Hello openser experts, I was trying to set up a openser box in public IP and observed a wiered behaviour. If I ran openser in port 5060 and try to register from a sip client, I get response from the openser, but when I try to run it in different port, something like 40000. and then try to connect from a sip client, I could see that the packets could reach the openser box using ethereal. But openser does not respond to these requests. I tried to put log in route() but didnt get any, this looks like openser didnot pick up the request for itself. I am using openser 1.0.1 and I am not running any firewall in the public openser. Is this problem known ? Am I missing something ? Also what is the significance of "listen" parameter in openser configuration file.
Regards, Voipwala
Hello,
what do you see with: netstat -tulp --numeric-ports | grep openser
How did you configure openser to listen on 40000?
On 03/11/06 10:06, voipwala hindustani wrote:
Hello openser experts, I was trying to set up a openser box in public IP and observed a wiered behaviour. If I ran openser in port 5060 and try to register from a sip client, I get response from the openser, but when I try to run it in different port, something like 40000. and then try to connect from a sip client, I could see that the packets could reach the openser box using ethereal. But openser does not respond to these requests. I tried to put log in route() but didnt get any, this looks like openser didnot pick up the request for itself. I am using openser 1.0.1 and I am not running any firewall in the public openser. Is this problem known ? Am I missing something ? Also what is the significance of "listen" parameter in openser configuration file.
with listen you can specify the protocol, ip address / network interface and the port to listen to:
http://www.openser.org/dokuwiki/doku.php?id=openser_core_cookbook#listen
Cheers, Daniel
Regards, Voipwala
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hello, has anyone a working config to send SMS via SIP MESSAGES ?
I´ve already installed a SMS Modem, that works with smstools, but i´m not able to send a MESSAGE via SMS through openser, in my debug log there are always a lot of failures regarding the tm module, so i think i missconfigured something.
In the docs there are some examples, but where to place in existing configs (old ser configs i guess)?
If anyone could leave me a sample, it would be very helpfull.
best regards,
Andreas Matzel
-
Andreas M. -
Daniel-Constantin Mierla -
voipwala hindustani