Hello,
On 12/16/08 17:55, joy yue wrote:
Hi Daniel,
After setting debug level to 5, the log does not have more
information. I still see the same small error message:
testmachine console login: Dec 16 08:37:18 paecongo ./openser[5728]:
CRITICAL:core:
qm_debug_frag: qm_*: fragm. 1002a38d8 (address 1002a3908) end
overwritten(0, 0)!
there should be some allocation, initialization of modules, etc
... so
we can track where it happened. Set:
debug=5
memlog=1
You can set also:
log_stderror=yes
so you get the output to the console, not to syslog.
Send all you got here. Do not use openserctl/kamctl to start it, use:
/path/to/openser -f /path/to/config.file
I am using 64-bit openser, is there any special thing I need to do for
64-bit?
No.
Daniel
Thanks,
-Joy
On 12/16/08, *Daniel-Constantin Mierla* <miconda(a)gmail.com
<mailto:miconda@gmail.com>> wrote:
Hello Joy,
On 12/16/08 17:28, joy yue wrote:
Hi Daniel,
Do you mean sending the log message with higher debugging
level? The error message I sent earlier is all I saw with
debug level 3.
yes, set the debug level to 5.
I am not using any costom module. The error happens right
after openser starts even before forking its child process.
good, then the log is not that big. You can send it privately to
me if you want to protect some information there.
Thank you,
Daniel
Thanks,
-Joy
On 12/16/08, *Daniel-Constantin Mierla* <miconda(a)gmail.com
<mailto:miconda@gmail.com> <mailto:miconda@gmail.com
<mailto:miconda@gmail.com>>> wrote:
Hello,
On 12/16/08 04:06, joy yue wrote:
Thanks for the help. After re-compilation, I was able
to run
openser, but only the main process is running, and I hit
another error:
./openser[9064]: CRITICAL:core:qm_debug_frag: qm_*: fragm.
1002a3760 (address 1002a3790) end overwritten(0, 0)!
there is an error in the operations with memory. Can you make a
tarball with entire log messages (from start to end) and
make it
available for download?
Are you using any custom module developed by yourself?
Cheers,
Daniel
I am using 64-bit openser.
Thanks,
-Joy
On 12/15/08, *Klaus Darilion*
<klaus.mailinglists(a)pernau.at
<mailto:klaus.mailinglists@pernau.at>
<mailto:klaus.mailinglists@pernau.at
<mailto:klaus.mailinglists@pernau.at>>
<mailto:klaus.mailinglists@pernau.at
<mailto:klaus.mailinglists@pernau.at>
<mailto:klaus.mailinglists@pernau.at
<mailto:klaus.mailinglists@pernau.at>>>> wrote:
maybe you only have recompiled the core.
make proper
make all
regards
klaus
joy yue wrote:
Hi,
I was trying to debugg if I hit a memory leak
issue. I
delete
"-DF_MALLOC" line and insert a
"-DDBG_QM_MALLOC"
line
of DEFS
string in Makefile.def. I was able to compile
openser
with new
Makefile.def. But when running openser, I get error,
fm_free()
is not defined, in many modules. And there is a flag
mismatch
between openser core and modules compilation. Core
compilation
has DDBG_QM_MALLOC flag, but module compilation
still uses
F_MALLOC instead of DDBG_QM_MALLOC. Is there
anything
else I
need to change in Makefile.defs?
Thanks,
-Joy
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
<mailto:Users@lists.kamailio.org>
<mailto:Users@lists.kamailio.org
<mailto:Users@lists.kamailio.org>>
<mailto:Users@lists.kamailio.org
<mailto:Users@lists.kamailio.org>
<mailto:Users@lists.kamailio.org
<mailto:Users@lists.kamailio.org>>>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
<mailto:Users@lists.kamailio.org>
<mailto:Users@lists.kamailio.org
<mailto:Users@lists.kamailio.org>>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
-- Daniel-Constantin Mierla
http://www.asipto.com
--
Daniel-Constantin Mierla
http://www.asipto.com
--
Daniel-Constantin Mierla
http://www.asipto.com