Hello, I don't know if is the same thing by i using PATH support with Asterisk PJSIP from time: Kamailio: /*loadmodule "path.so"*/ /*# ----- path params -----*/ /*modparam("path", "use_received", 1)*/ /* */ /*REGISTER bLOCK */ /*append_hf("Supported: path\r\n");*/ /*add_path();*/ /*rewritehostport("AsteriskIP:5060");*/ /*forward();*/ /* */ Asterisk: /[1000]/ /type=aor/ /max_contacts=5/ /remove_existing=yes/ /qualify_frequency=30/ /mailboxes=1000/ /*support_path=yes*/ INVITE From Asterisk: /* */ /**/ /**/ --- I'm SoCIaL, MayBe El 2/03/2023 a las 2:17 p. m., Henning Westerholt escribió:

Hi Sergiu, Thanks. Unfortunately asterisk 16 is in security fix mode only, so it will not land there. But one could probably backport it to their own build, its not too large change. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: Sergiu Pojoga &lt;pojogas(a)gmail.com&gt; Sent: Donnerstag, 2. März 2023 23:40 To: Kamailio (SER) - Users Mailing List &lt;sr-users(a)lists.kamailio.org&gt; Subject: [SR-Users] Re: OT: path support fix for asterisk Thanks for the heads up Henning. Finally some good news. Just posted a comment in the original years-long case<https://issues.asterisk.org/jira/browse/ASTERISK-28211> asking if this fix can be backported to at least Asterisk 16. On Thu, Mar 2, 2023 at 2:44 PM Henning Westerholt <hw@gilawa.com<mailto:hw@gilawa.com>> wrote: Hello, It’s off-topic, but it was several times discussed here on the list. It seems that the upcoming 18.17 and 20.2 asterisk version seems to properly support path headers. From the announcement: • [ASTERISK-30100<https://issues.asterisk.org/jira/browse/ASTERISK-30100>] - res_pjsip: Path is ignored on INVITE to endpoint (Reported by Yury Kirsanov) This bug has been many years open. have not tried it yet, but it looks promising. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-leave@lists.kamailio.org<mailto:sr-users-leave@lists.kamailio.org> Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:

Dial(PJSIP/($EXTEN}) is how I do it and can confirm this DOES work and support Path. I bet PJSIP_DIAL_CONTACTS probably generates a list of SIP URI and thereby short-cuts the path information stored. From: Javier Vidal -- Quasar &lt;javier.quasar(a)gmail.com&gt; Reply-To: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.kamailio.org&gt; Date: Friday, March 17, 2023 at 6:01 AM To: "Kamailio (SER) - Users Mailing List" &lt;sr-users(a)lists.kamailio.org&gt; Subject: [SR-Users] Re: OT: path support fix for asterisk Hi all, I have the problem with versión 20.2 when I use function PJSIP_DIAL_CONTACTS, the INVITE goes directly to Endpoint not going through the Proxy, Route header is not included. Asterisk: exten => _3XXX,1,Dial(${PJSIP_DIAL_CONTACTS(${EXTEN})}). -> Fail INVITE directly to Endpoint no use PATH exten => _3XXX,1,Dial(PJSIP/${EXTEN}) -> Works fine INVITE going through the proxy If make a call directly to JSIP extension works fine and the OPTIONS too using the proxy Have any idea? Best regards. El dom, 5 mar 2023 a las 22:58, Social Boh (&lt;social(a)bohboh.info&gt;) escribió: Hello, I don't know if is the same thing by i using PATH support with Asterisk PJSIP from time: Kamailio: loadmodule "path.so" # ----- path params ----- modparam("path", "use_received", 1) REGISTER bLOCK append_hf("Supported: path\r\n"); add_path(); rewritehostport("AsteriskIP:5060"); forward(); Asterisk: [1000] type=aor max_contacts=5 remove_existing=yes qualify_frequency=30 mailboxes=1000 support_path=yes INVITE From Asterisk: --- I'm SoCIaL, MayBe El 2/03/2023 a las 2:17 p. m., Henning Westerholt escribió: Hello, It’s off-topic, but it was several times discussed here on the list. It seems that the upcoming 18.17 and 20.2 asterisk version seems to properly support path headers. From the announcement: · [ASTERISK-30100] - res_pjsip: Path is ignored on INVITE to endpoint (Reported by Yury Kirsanov) This bug has been many years open. have not tried it yet, but it looks promising. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: