Pls. pls. If any body have the solution pls. do provide me..
Thanks & Regards Ritesh Jalan Senior Engineer - Test & Audit Net4india Ltd. 504, Bhikaji Cama Bhawan 11, Bhikaji Cama Place New Delhi 110066 Tel: 91 (011) (26160129 - 131) (Extn 131) URL: http://www.net4india.com ----- Original Message ----- From: Ritesh Jalan To: serusers@lists.iptel.org Sent: Wednesday, January 12, 2005 4:52 PM Subject: [Serusers] Problem in calling and Accounting
Hi All I have installed Ser 0.8.14 with mysql.so. My aim is to authenticate users and then forward all the request to destination cisco router, and also to maintain accounting for billing purpose. I am facing two problems, my all call gets disconnected after few secs of its own and I dont get call records also for any calls
My ser.cfg is as below. Pls help me in this matter.
# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
listen=202.71.135.193 listen=127.0.0.1 alias=jalan.com alias=202.71.135.193
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# ------Acc Params ------ modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("usrloc", "db_url", "sql://ser:heslo@localhost/ser") # ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!www_authorize("202.71.135.193", "subscriber")) { www_challenge("202.71.135.193", "0"); break; };
save("location"); break; }; if (method == "INVITE"){ if (uri=~"sip:[0-9]*@*"){ prefix("1234"); rewritehostport("64.45.47.231:5060"); forward(64.45.47.231, 5060); }; if (!t_relay()) { sl_reply_error(); break; }; }; setflag(1); # native SIP destinations are handled using our USRLOC DB #if (!lookup("location")) { #sl_send_reply("404", "Not Found"); #break; #}; }; # forward to current uri now; use stateful forwarding; that # works reliably }
Thanks & Regards Ritesh Jalan Senior Engineer - Test & Audit Net4india Ltd. 504, Bhikaji Cama Bhawan 11, Bhikaji Cama Place New Delhi 110066 Tel: 91 (011) (26160129 - 131) (Extn 131) URL: http://www.net4india.com
--------------------------------------------------------------------------------
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Ritesh Jalan