Hello, I encountered such a problem: An INVITE request comes to Kamailio. Kamailio finds a location and forwards this INVITE to a device. The device receives a push notification and registers on a new IP: port. The tsilo module creates a new branch. And this branch sends the INVITE. The device responds with 100 -> 180 -> 302. 100 and 180 are forwarded to the calling subscriber, but anything greater than 300, such as 302, is not forwarded. DEBUG: tm [t_reply.c:1363]: t_should_relay_response(): ->>>>>>>>> T_code=180, new_code=302 DEBUG: tm [t_reply.c:1448]: t_should_relay_response(): store - other branches still active DEBUG: tm [t_reply.c:1925]: relay_reply(): reply status=3 branch=1, save=1, relay=-1 icode=0 msg status=302 Kamailio saves this code and does not pass it to the caller. Is there a way to immediately pass this 302? It seems like something can be done in t_on_branch_failure, which is invoked, but I can't figure out what needs to be done there. Is there a parameter that can solve my problem? A similar question has been asked before, but the link in Daniel's response leads to a non-existent ID: https://lists.kamailio.org/pipermail/sr-users/2009-March/022447.html __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: