Hi All, I have Aastra 480i and Cisco both behind a Netscreen firewall. When rebooted the Aastra registers with the SER. The re-registration time is around an hour (it cannot be changed for some reason!). Now after say about 7 mins when I do "serctl ul show" I cannot see the Aastra in the SER at all. The Cisco is still present. Also the Aastra can still make outgoing calls but cannot receive any incoming calls(thats because the SER doesnt have it anymore.) If the NAT bindings are lost, once you make an outgoing call, the phone should receive an incoming call afterwards. But for Aastra something very strange is going on. I cant figure out that why after a short period itself the SER no more has the Aastra in its memory? Does anyone has any clue whats going on? Is there a problem with the phone or SER?
Thanks,
Hitesh.
Good thing for u is show us REGISTER message that your device send to SER, capture it with ngrep/ethereal/whatever and send to the list
What do u mean "around an hour"? where did u get it ?
Check if there upgrade of firmware for that device, or... for example linksys rt31p2 has not this parameter in the web iface but do have it when you do tftp/html provisioning.
Read this: http://www.voip-info.org/wiki-Aastra+480i
They also writing about registration lost and reregister timeout.
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Jain, Hitesh Sent: Monday, February 14, 2005 5:13 PM To: serusers@lists.iptel.org Subject: [Serusers] Aastra, SER registration timeout
Hi All, I have Aastra 480i and Cisco both behind a Netscreen firewall. When rebooted the Aastra registers with the SER. The re-registration time is around an hour (it cannot be changed for some reason!). Now after say about 7 mins when I do "serctl ul show" I cannot see the Aastra in the SER at all. The Cisco is still present. Also the Aastra can still make outgoing calls but cannot receive any incoming calls(thats because the SER doesnt have it anymore.) If the NAT bindings are lost, once you make an outgoing call, the phone should receive an incoming call afterwards. But for Aastra something very strange is going on. I cant figure out that why after a short period itself the SER no more has the Aastra in its memory? Does anyone has any clue whats going on? Is there a problem with the phone or SER?
Thanks,
Hitesh.
-
Jain, Hitesh -
Vitaly Nikolaev