Hi John!
Please send your emails always to the list!
Have you enabled mysql logging in the Makefile of the acc module?
Thanks Klaus, but I have tried various examples with
the inclusion of the
acc module. I am not getting anything logged in /var/log/messages
John.
----- Original Message -----
From: "Klaus Darilion" <klaus.mailinglists(a)pernau.at>
To: "John Morrell" <john.morrell(a)aqcorporate.com>
Cc: <serusers(a)lists.iptel.org>
Sent: Thursday, July 01, 2004 10:53 AM
Subject: Re: [Serusers] SER loging and MySQL problems
Have you really read the manual?
http://iptel.org/ser/doc/seruser/seruser.html
There's a section called "Accounting".
You have to use the acc module. Take also a look at the README of the
acc module.
klaus
John Morrell wrote:
>I have ser-0.8.12 setup on Red Hat along with MySQL and SerWeb. Calls
are
>being routed ok, but I can not seem to achieve
any sort of logging or
>accounting of what is going on. I've followed examples and tutorials but
>still not progressed much further than routing the calls. I have
included my
>ser.cfg below.
>
>
>#
># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
>#
># simple quick-start config script
>#
>
># ----------- global configuration parameters ------------------------
>
>/*
>debug=3 # debug level (cmd line: -dddddddddd)
>fork=yes
>log_stderror=no # (cmd line: -E)
>*/
>
># Uncomment these lines to enter debugging mode
>debug=7
>fork=yes
>log_stderror=yes
>
>
>check_via=no # (cmd. line: -v)
>dns=no # (cmd. line: -r)
>rev_dns=no # (cmd. line: -R)
>port=5060
>children=4
>fifo="/tmp/ser_fifo"
>
># ------------------ module loading ----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/lib/ser/modules/mysql.so"
>
>loadmodule "/usr/lib/ser/modules/sl.so"
>loadmodule "/usr/lib/ser/modules/tm.so"
>loadmodule "/usr/lib/ser/modules/rr.so"
>loadmodule "/usr/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/lib/ser/modules/usrloc.so"
>loadmodule "/usr/lib/ser/modules/registrar.so"
>
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>loadmodule "/usr/lib/ser/modules/auth.so"
>loadmodule "/usr/lib/ser/modules/auth_db.so"
>
># ----------------- setting module-specific parameters ---------------
>
># -- usrloc params --
>
>#modparam("usrloc", "db_mode", 0)
>
># Uncomment this if you want to use SQL database
># for persistent storage and comment the previous line
>modparam("usrloc", "db_mode", 2)
>modparam("usrloc", "db_url",
"sql://ser:******@localhost/ser")
>
># -- auth params --
># Uncomment if you are using auth module
>#
>modparam("auth_db", "password_column", "password")
>modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which true in this
config),
#
uncomment also the following parameter)
#
modparam("auth_db", "db_url",
"sql://ser:******@localhost/ser")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
# if (!www_authorize("iptel.org", "subscriber")) {
# www_challenge("iptel.org", "0");
# break;
# };
save("location");
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers