28 Apr
2005
28 Apr
'05
3:44 p.m.
As I mentioned I dont do combo anymore, it sdidnt make sense to me
Iqbal
Elton Machado wrote:
Hi,
Iqbal, please forward me an e.g. of this combo configuration , as I'm
willing also to have it to compare with my trials.
Regards,
Elton
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Iqbal
Sent: quinta-feira, 28 de Abril de 2005 11:43
To: Kamran Ahmad
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] what is the best way of using asterisk as B2BUA
Hi
I originally had a setup like this, but to me it just seemed way to
expensive to be doing this, since you will need to add asterisk boxes,
just to keep doing these "u-turns", and because you want the billing
info. Also, I started to have problem when I hit the external gateway,
because originally again i did this via asterisk, which then passing
data back to ser gave headaches. But if anyone gets this combo up and
running weel would be interested to know complete setup.
Iqbal
Kamran Ahmad wrote:
hello Carles Wang
This is the way to to successfully call through
asterisk.
SER is Main Registrar. Asterisk is B2BUA.
SER will route its call to asterisk.
now control is at asterisk side he can do any thing to
that call (forword, voicemail, etc....). but actually
asterisk dont know who is the user he ll route this
call back to SER who is aware of the user.
it is like U-Turn through Asterisk. try this and tell
me
ser.cfg
------------------------
rewritehostport("asterisk:port");
force_rport();
fix_nated_contact();
force_rtp_proxy();
t_relay();
sip.conf
------------------------
[general]
context=default
port=5070
bindaddr=0.0.0.0
srvlookup=no
[2000]
callerid=2000
type=friend
host=dynamic
canreinvite=no
reinvite=no
qualify=yes
auth=plaintext
nat=yes
[3000]
type=friend
host=dynamic
callerid=3000
qualify=yes
canreinvite=no
reinvite=no
auth=plaintext
nat=yes
--- Charles Wang <lazy.charles(a)gmail.com> wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
.
I also have the same problem. I don't know how
to
fix it. Do you get
any solution or sample config about it. I think it
is a problem of
asterisk.
On 4/28/05, Kamran Ahmad <p_kami(a)yahoo.com> wrote:
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
.
hi list
any person using ser and Asterisk as B2bUA.
what is the best way of using asterisk as B2BUA.
i can route calls to through asterisk its working
but
some time one UA tries to hangup the call and the
other side is not able to receive Bye
what could be the best way of using asterisk for
monitering voice
Thanks
Kamran
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
http://mail.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Best Regards
Charles
29 Apr
29 Apr
12:06 a.m.
New subject: [Serusers] what is the best way of using asterisk as B2BUA
Ok, but what you recommend in my case ?
I have something like this....
Private ips subnet1 / Private Ip subnet2
UAc -------
|--- SER -- * --- Firewall --router -- Sip Provider
Uac ------- |
Other Uac *
I'm having some problems with codec's nat rtp sessions and so on...
signalling is fine all other still to be fixed :(
What do you recommend me as I can't get any working example of this
configuration or something like it, or any configuration that shows me the
best way to get SER registered in sip provider?
Regards,
Elton
-----Original Message-----
From: Iqbal [mailto:iqbal@gigo.co.uk]
Sent: quinta-feira, 28 de Abril de 2005 14:45
To: Elton Machado
Cc: 'Kamran Ahmad'; serusers(a)lists.iptel.org
Subject: Re: [Serusers] what is the best way of using asterisk as B2BUA
As I mentioned I dont do combo anymore, it sdidnt make sense to me
Iqbal
Elton Machado wrote:
Hi,
Iqbal, please forward me an e.g. of this combo configuration , as I'm
willing also to have it to compare with my trials.
Regards,
Elton
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Iqbal
Sent: quinta-feira, 28 de Abril de 2005 11:43
To: Kamran Ahmad
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] what is the best way of using asterisk as B2BUA
Hi
I originally had a setup like this, but to me it just seemed way to
expensive to be doing this, since you will need to add asterisk boxes,
just to keep doing these "u-turns", and because you want the billing
info. Also, I started to have problem when I hit the external gateway,
because originally again i did this via asterisk, which then passing
data back to ser gave headaches. But if anyone gets this combo up and
running weel would be interested to know complete setup.
Iqbal
1:32 a.m.
New subject: [Serusers] what is the best way of using asterisk as B2BUA
Hi
I didnt follow the diagram much :-), but I am guessing you wish to use
asterisk because you are sending your IP traffic to a sip provider who
needs to authenticate you using SIP..if so you could try uac in ser
modparam("uac","credential","gw_user:gw_realm:gw_passwd")
now this on a failure_route you should be able to connect to the gateway.
I am connecting via IP, hence my gateway accepts me because of my IP
address.
SER does not do anything with ur codecs, only the client and anything
which will play with the media stream will, hence if you just use ser,
the codecs are decided by the person/device starting the call, and where
the endpoint is.
Asterisk however can change the codec, or should i say do codec
negotiation, hence can/will change it.
Have u asked on the asterisk mailing list/irc to see if anyone has a
config
For ser and nat, there is a good start-up doc on www.onsip.org.
If you really want to combine asterisk and ser, you need to first get
them to talk.
This means editing sip.conf channel file in asterisk. In that file every
client which connects to asterisk must have a entry.
The entensions file can then be used to tell it what to do with the call,
and even send the call out on IP (there are lots of configs on asterisk
mailing list for this)
SER must be set to route all calls via asterisk, this is done by
rewriteuri command, and configuring to asterisk IP address, asterisk
must of course accept this, and to do that, you need again the sip.conf
file.
If all you are going to use asterisk for, it to send you calls to the
gateway, I think it overkill.
Iqbal
On 4/28/2005, "Elton Machado" <elton.machado(a)gmail.com> wrote:
Ok, but what you recommend in my case ?
I have something like this....
Private ips subnet1 / Private Ip subnet2
UAc -------
|--- SER -- * --- Firewall --router -- Sip Provider
Uac ------- |
Other Uac *
I'm having some problems with codec's nat rtp sessions and so on...
signalling is fine all other still to be fixed :(
What do you recommend me as I can't get any working example of this
configuration or something like it, or any configuration that shows me the
best way to get SER registered in sip provider?
Regards,
Elton
-----Original Message-----
From: Iqbal [mailto:iqbal@gigo.co.uk]
Sent: quinta-feira, 28 de Abril de 2005 14:45
To: Elton Machado
Cc: 'Kamran Ahmad'; serusers(a)lists.iptel.org
Subject: Re: [Serusers] what is the best way of using asterisk as B2BUA
As I mentioned I dont do combo anymore, it sdidnt make sense to me
Iqbal
Elton Machado wrote:
Hi,
Iqbal, please forward me an e.g. of this combo configuration , as I'm
willing also to have it to compare with my trials.
Regards,
Elton
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Iqbal
Sent: quinta-feira, 28 de Abril de 2005 11:43
To: Kamran Ahmad
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] what is the best way of using asterisk as B2BUA
Hi
I originally had a setup like this, but to me it just seemed way to
expensive to be doing this, since you will need to add asterisk boxes,
just to keep doing these "u-turns", and because you want the billing
info. Also, I started to have problem when I hit the external gateway,
because originally again i did this via asterisk, which then passing
data back to ser gave headaches. But if anyone gets this combo up and
running weel would be interested to know complete setup.
Iqbal
10:27 a.m.
New subject: [Serusers] what is the best way of using asterisk as B2BUA
Hi All!
May I know the basic modules / requirements if I want to install
ser with acc and radius support..
Im using debian ..
thanks,
ed
12:06 a.m.
New subject: [Serusers] what is the best way of using asterisk as B2BUA
-----Original Message-----
From: Iqbal [mailto:iqbal@gigo.co.uk]
Sent: quinta-feira, 28 de Abril de 2005 14:45
To: Elton Machado
Cc: 'Kamran Ahmad'; serusers(a)lists.iptel.org
Subject: Re: [Serusers] what is the best way of using asterisk as B2BUA
As I mentioned I dont do combo anymore, it sdidnt make sense to me
Iqbal
Elton Machado wrote:
Hi,
Iqbal, please forward me an e.g. of this combo configuration , as I'm
willing also to have it to compare with my trials.
Regards,
Elton
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Iqbal
Sent: quinta-feira, 28 de Abril de 2005 11:43
To: Kamran Ahmad
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] what is the best way of using asterisk as B2BUA
Hi
I originally had a setup like this, but to me it just seemed way to
expensive to be doing this, since you will need to add asterisk boxes,
just to keep doing these "u-turns", and because you want the billing
info. Also, I started to have problem when I hit the external gateway,
because originally again i did this via asterisk, which then passing
data back to ser gave headaches. But if anyone gets this combo up and
running weel would be interested to know complete setup.
Iqbal
Kamran Ahmad wrote:
hello Carles Wang
This is the way to to successfully call through
asterisk.
SER is Main Registrar. Asterisk is B2BUA.
SER will route its call to asterisk.
now control is at asterisk side he can do any thing to
that call (forword, voicemail, etc....). but actually
asterisk dont know who is the user he ll route this
call back to SER who is aware of the user.
it is like U-Turn through Asterisk. try this and tell
me
ser.cfg
------------------------
rewritehostport("asterisk:port");
force_rport();
fix_nated_contact();
force_rtp_proxy();
t_relay();
sip.conf
------------------------
[general]
context=default
port=5070
bindaddr=0.0.0.0
srvlookup=no
[2000]
callerid=2000
type=friend
host=dynamic
canreinvite=no
reinvite=no
qualify=yes
auth=plaintext
nat=yes
[3000]
type=friend
host=dynamic
callerid=3000
qualify=yes
canreinvite=no
reinvite=no
auth=plaintext
nat=yes
--- Charles Wang <lazy.charles(a)gmail.com> wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
.
I also have the same problem. I don't know how
to
fix it. Do you get
any solution or sample config about it. I think it
is a problem of
asterisk.
On 4/28/05, Kamran Ahmad <p_kami(a)yahoo.com> wrote:
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
.
hi list
any person using ser and Asterisk as B2bUA.
what is the best way of using asterisk as B2BUA.
i can route calls to through asterisk its working
but
some time one UA tries to hangup the call and the
other side is not able to receive Bye
what could be the best way of using asterisk for
monitering voice
Thanks
Kamran
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
http://mail.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Best Regards
Charles
6961
days inactive
6962
days old
4 comments
3 participants
participants (3)
-
Edgardo O. Gonzales II -
Elton Machado -
Iqbal