Hi to all,
My apache errror log just showed me this: [Tue Aug 29 15:45:57 2006] [error] [client 193.137.239.11] (13)Permission denied: access to /serweb/ denied
Roberto
On 8/29/06, Karel Kozlik karel@iptel.org wrote:
hi, what your apache error log say? I think there are no read rights for apache on serweb files.
Karel
Roberto Lopes napsal(a):
Dear SER Users,
I've a problem with Serweb and I hope somebody could help me out I know this problem was already talked about but i never saw a
solution
to it, so I'll post it again hoping somebody will know how to solve
this
mistake. So the problem is that when i try to put serweb working in my firefox browser the following error is shown:
Forbidden
You don't have permission to access /serweb/index.html on this server.
Additionally, a 403 Forbidden error was encountered while trying to
use
an ErrorDocument to handle the request.
Apache/2.2.0 (Fedora) Server at xxx.xxx.xxx.xxx Port 80
I think i installed everything correctly.
I'll show some of the configurations I've made
#1 - In "/etc/php.ini" I changed the memory limit from 8 to 12M
because
of the Serweb extension classkit.so … memory_limit = 12M
#2 - I used pear to install classkit.so
pear install <path to classkit-0.4.tgz>
#3 - In "php.ini" … ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; … extension=classkit.so
#4 - In "/serweb-0.4/config/config_data_layer.php": … $config->data_sql->host[$i]['host']="<IP MySQL Server>"; … $config->data_sql->host[$i][ 'user']="<DB User>"; $config->data_sql->host[$i]['pass']="<User password>"; ..
#5 - In "/root/instalacao/serweb-0.9.4/config/config_paths.php"
$config->root_path="/root/instalacao/serweb- 0.9.4/html/";
#6 - I created a log file touch /var/log/serweb chown apache /var/log/serweb
#7 - I created a folder for SIP domain mkdir /root/installation/serweb-0.4/html/domains/xxx.xxx.xxx.xxx(IP of
SER)
#8 - I copied the files and folder from the default folder ("/root/installation/serweb-0.4/html/domains/_default/") to the one i created.
#9 - I specified the SIP domain in the file "/root/installation/serweb-0.4/config/set_domain.php": … $config->domain = "xxx.xxx.xxx.xxx(IP of SER)"; …
#10 - I enabled logging in file "/root/installation/serweb-0.4/config/config.php": … $config->enable_loging = true; $config->log_file = "/var/log/serweb;
#11 - In /etc/httpd/conf/httpd.conf I added an alias …
<Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride None Order deny,allow Allow from all
</Directory>
<IfModule mod_userdir.c> UserDir disable root #UserDir public_html </IfModule>
Alias /serweb/ "/root/instalacao/serweb-0.9.4/html" <Directory "/root/instalacao/serweb-0.9.4/html"> Options Indexes MultiViews Options +FollowSymlinks AllowOverride None Order Deny,Allow Allow from all
</Directory> ...
#12 - I then put some commands for Apache to begin when computer would
start
chkconfig httpd on service httpd start
#13 - I introduced the following URL
http://<IP of SER>/<alias i wrote in httpd.conf>/ http://xxx.xxx.xxx.xxx/serweb/
And then that HTTP 403 error shows up
I really hope somebody can help me because I'm doing a VoIP project
for
my school and I'd really like to have everything done in time.
Thank you for your attention, Roberto Lopes
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi,
Are your php files recognized as a default? Did u try the full path to the index.php (i.e. ...../serweb/index.php)?
But most probably it is your httpd.conf Alias setup. In INSTALL file it says that the setup is as follows:
Alias /serweb "/your/serweb/dir/html"
Yours is
Alias /serweb/ "/root/instalacao/serweb-0.9.4/html"
(Plz, notice the trailing slash after "/serweb/". That makes a huge difference)
Best of luck with the project,
Andrey.
On 8/29/06, Roberto Lopes robertolopes5@gmail.com wrote:
Hi to all,
My apache errror log just showed me this: [Tue Aug 29 15:45:57 2006] [error] [client 193.137.239.11] (13)Permission denied: access to /serweb/ denied
Roberto
Roberto
On 8/29/06, Karel Kozlik < karel@iptel.org> wrote:
hi, what your apache error log say? I think there are no read rights for apache on serweb files.
Karel
Roberto Lopes napsal(a):
Dear SER Users,
I've a problem with Serweb and I hope somebody could help me out I know this problem was already talked about but i never saw a
solution
to it, so I'll post it again hoping somebody will know how to solve
this
mistake. So the problem is that when i try to put serweb working in my firefox browser the following error is shown:
Forbidden
You don't have permission to access /serweb/index.html on this server.
Additionally, a 403 Forbidden error was encountered while trying to
use
an ErrorDocument to handle the request.
Apache/2.2.0 (Fedora) Server at xxx.xxx.xxx.xxx Port 80
I think i installed everything correctly.
I'll show some of the configurations I've made
#1 - In "/etc/php.ini" I changed the memory limit from 8 to 12M
because
of the Serweb extension classkit.so … memory_limit = 12M
#2 - I used pear to install classkit.so
pear install <path to classkit-0.4.tgz>
#3 - In "php.ini" … ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; … extension=classkit.so
#4 - In "/serweb-0.4/config/config_data_layer.php": … $config->data_sql->host[$i]['host']="<IP MySQL
Server>";
… $config->data_sql->host[$i][ 'user']="<DB User>"; $config->data_sql->host[$i]['pass']="<User
password>";
..
#5 - In "/root/instalacao/serweb-0.9.4/config/config_paths.php"
$config->root_path="/root/instalacao/serweb-
0.9.4/html/";
#6 - I created a log file touch /var/log/serweb chown apache /var/log/serweb
#7 - I created a folder for SIP domain mkdir
/root/installation/serweb-0.4/html/domains/xxx.xxx.xxx.xxx(IP of SER)
#8 - I copied the files and folder from the default folder ("/root/installation/serweb-0.4/html/domains/_default/") to the one i created.
#9 - I specified the SIP domain in the file "/root/installation/serweb-0.4/config/set_domain.php": … $config->domain = "xxx.xxx.xxx.xxx(IP of SER)"; …
#10 - I enabled logging in file "/root/installation/serweb-0.4/config/config.php": … $config->enable_loging = true; $config->log_file = "/var/log/serweb;
#11 - In /etc/httpd/conf/httpd.conf I added an alias …
<Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride None Order deny,allow Allow from all
</Directory>
<IfModule mod_userdir.c> UserDir disable root #UserDir public_html </IfModule>
Alias /serweb/ "/root/instalacao/serweb-0.9.4/html" <Directory "/root/instalacao/serweb-0.9.4/html"> Options Indexes MultiViews Options +FollowSymlinks AllowOverride None Order Deny,Allow Allow from all
</Directory> ...
#12 - I then put some commands for Apache to begin when computer would start
chkconfig httpd on service httpd start
#13 - I introduced the following URL
http://<IP of SER>/<alias i wrote in httpd.conf>/ http://xxx.xxx.xxx.xxx/serweb/
And then that HTTP 403 error shows up
I really hope somebody can help me because I'm doing a VoIP project
for
my school and I'd really like to have everything done in time.
Thank you for your attention, Roberto Lopes
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi,
Yes, I tried the full path to the index.php but it didn't work
So I also tried to put, as you said,
Alias /serweb "/your/serweb/dir/html"
instead of
Alias /serweb/ "/your/serweb/dir/html" but it still doesn't work.
I'm sure it's just one tiny thing that's ruining the whole process but i simply can't get to it! If only some log could be more precise Serweb is really driving me crazy...
Thanks for wishing me good luck
Hope some more ideas can come out to solve this problems
On 8/30/06, Andrey Kouprianov andrey.kouprianov@gmail.com wrote:
Hi,
Are your php files recognized as a default? Did u try the full path to the index.php (i.e. ...../serweb/index.php)?
But most probably it is your httpd.conf Alias setup. In INSTALL file it says that the setup is as follows:
Alias /serweb "/your/serweb/dir/html"
Yours is
Alias /serweb/ "/root/instalacao/serweb-0.9.4/html"
(Plz, notice the trailing slash after "/serweb/". That makes a huge difference)
Best of luck with the project,
Andrey.On 8/29/06, Roberto Lopes robertolopes5@gmail.com wrote:
Hi to all,
My apache errror log just showed me this: [Tue Aug 29 15:45:57 2006] [error] [client 193.137.239.11]
(13)Permission
denied: access to /serweb/ denied
Roberto
Roberto
On 8/29/06, Karel Kozlik < karel@iptel.org> wrote:
hi, what your apache error log say? I think there are no read rights for apache on serweb files.
Karel
Roberto Lopes napsal(a):
Dear SER Users,
I've a problem with Serweb and I hope somebody could help me out I know this problem was already talked about but i never saw a
solution
to it, so I'll post it again hoping somebody will know how to
solve
this
mistake. So the problem is that when i try to put serweb working in my
firefox
browser the following error is shown:
Forbidden
You don't have permission to access /serweb/index.html on this
server.
Additionally, a 403 Forbidden error was encountered while trying
to
use
an ErrorDocument to handle the request.
Apache/2.2.0 (Fedora) Server at xxx.xxx.xxx.xxx Port 80
I think i installed everything correctly.
I'll show some of the configurations I've made
#1 - In "/etc/php.ini" I changed the memory limit from 8 to 12M
because
of the Serweb extension classkit.so … memory_limit = 12M
#2 - I used pear to install classkit.so
pear install <path to classkit-0.4.tgz>
#3 - In "php.ini" … ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; … extension=classkit.so
#4 - In "/serweb-0.4/config/config_data_layer.php": … $config->data_sql->host[$i]['host']="<IP MySQL
Server>";
… $config->data_sql->host[$i][ 'user']="<DB User>"; $config->data_sql->host[$i]['pass']="<User
password>";
..
#5 - In "/root/instalacao/serweb-0.9.4/config/config_paths.php"
$config->root_path="/root/instalacao/serweb-
0.9.4/html/";
#6 - I created a log file touch /var/log/serweb chown apache /var/log/serweb
#7 - I created a folder for SIP domain mkdir
/root/installation/serweb-0.4/html/domains/xxx.xxx.xxx.xxx(IP of SER)
#8 - I copied the files and folder from the default folder ("/root/installation/serweb-0.4/html/domains/_default/") to the
one i
created.
#9 - I specified the SIP domain in the file "/root/installation/serweb-0.4/config/set_domain.php": … $config->domain = "xxx.xxx.xxx.xxx(IP of SER)"; …
#10 - I enabled logging in file "/root/installation/serweb-0.4/config/config.php": … $config->enable_loging = true; $config->log_file = "/var/log/serweb;
#11 - In /etc/httpd/conf/httpd.conf I added an alias …
<Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride None Order deny,allow Allow from all
</Directory>
<IfModule mod_userdir.c> UserDir disable root #UserDir public_html </IfModule>
Alias /serweb/ "/root/instalacao/serweb-0.9.4/html" <Directory "/root/instalacao/serweb-0.9.4/html"> Options Indexes MultiViews Options +FollowSymlinks AllowOverride None Order Deny,Allow Allow from all
</Directory> ...
#12 - I then put some commands for Apache to begin when computer
would
start
chkconfig httpd on service httpd start
#13 - I introduced the following URL
http://<IP of SER>/<alias i wrote in httpd.conf>/ http://xxx.xxx.xxx.xxx/serweb/
And then that HTTP 403 error shows up
I really hope somebody can help me because I'm doing a VoIP
project
for
my school and I'd really like to have everything done in time.
Thank you for your attention, Roberto Lopes
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Andrey Kouprianov -
Roberto Lopes