31 Mar
2016
31 Mar
'16
1:46 a.m.
Hi all,
I am having some issues using get_redirects() from the UAC_Redirect module
in conjunction with t_next_contacts from the TM Module. I've searched
Google and the list but the only references I can find are several years
old.
I am attempting to configure Kamailio so it if receives a 3XX redirect
message, it will store the Contacts it contains, and attempt them in 'Q'
parameter order.
So for the Contact below-
Contact: <sip:10.0.97.21:5060>;q=0.2,<sip:5.29.13.139:5060>;q=0.5.
I want Kamailio to try 5.29.13.139, and if that times out, or is rejected
in someway, try 10.0.97.21.
If I use t_relay rather than t_next_contacts, kamailio branches the calls
and relays them in parallel regardless of Q value - this is not what I want.
If I use t_next_contacts, it attempts 5.29.13.139 which is rejected with a
401, but it doesn't attempt 5.29.13.139 and responds "408", "Request
Timeout MH 2"
Relevant script section is below, has anyone been able to get this working?
failure_route[302] {
if (t_check_status("302")){
xlog("L_ALERT","Failure Route: 302\n$mb");
get_redirects("*");
if (!t_load_contacts()) {
send_reply("500", "Server Internal Error - Cannot load
contacts
MH");
exit;
};
if (!t_next_contacts()) {
t_reply("408", "Request Timeout MH");
} else {
t_on_failure("302");
t_relay();
exit;
};
} else if (t_check_status("[456][0-9][0-9]")){
if (!t_next_contacts()) {
t_reply("408", "Request Timeout MH 2");
} else {
t_on_failure("302");
t_relay();
exit;
}
}
}
Thanks,
Matthew
31 Mar
31 Mar
12:57 p.m.
I've found the following in an old thread that should help me debug, I will
let the list know how I get on.
pv_printf("$var(contact)", "$xavp(contacts[0]=>uri)");
xlog ("L_NOTICE", "var(contact)=$var(contact)\r\n");
On Thu, Mar 31, 2016 at 12:46 AM, Marrold <kamailio(a)marrold.co.uk> wrote:
Hi all,
I am having some issues using get_redirects() from the UAC_Redirect module
in conjunction with t_next_contacts from the TM Module. I've searched
Google and the list but the only references I can find are several years
old.
I am attempting to configure Kamailio so it if receives a 3XX redirect
message, it will store the Contacts it contains, and attempt them in 'Q'
parameter order.
So for the Contact below-
Contact: <sip:10.0.97.21:5060>;q=0.2,<sip:5.29.13.139:5060>;q=0.5.
I want Kamailio to try 5.29.13.139, and if that times out, or is rejected
in someway, try 10.0.97.21.
If I use t_relay rather than t_next_contacts, kamailio branches the calls
and relays them in parallel regardless of Q value - this is not what I want.
If I use t_next_contacts, it attempts 5.29.13.139 which is rejected with a
401, but it doesn't attempt 5.29.13.139 and responds "408", "Request
Timeout MH 2"
Relevant script section is below, has anyone been able to get this working?
failure_route[302] {
if (t_check_status("302")){
xlog("L_ALERT","Failure Route: 302\n$mb");
get_redirects("*");
if (!t_load_contacts()) {
send_reply("500", "Server Internal Error - Cannot load
contacts MH");
exit;
};
if (!t_next_contacts()) {
t_reply("408", "Request Timeout MH");
} else {
t_on_failure("302");
t_relay();
exit;
};
} else if (t_check_status("[456][0-9][0-9]")){
if (!t_next_contacts()) {
t_reply("408", "Request Timeout MH 2");
} else {
t_on_failure("302");
t_relay();
exit;
}
}
}
Thanks,
Matthew
5 Apr
5 Apr
1:14 a.m.
To not leave this thread forever unanswered, it turns out the above method
using t_next_contacts() was working as it should be, but as every contact
in the 302 redirect response was returning a 401, it tried all available
contacts and then ran out of options which resulted in t_reply("408",
"Request Timeout MH 2");
This was due to my lazy regex whilst debugging. "[456][0-9][0-9]"
Apologies for the noise.
On Thu, Mar 31, 2016 at 11:57 AM, Marrold <kamailio(a)marrold.co.uk> wrote:
I've found the following in an old thread that
should help me debug, I
will let the list know how I get on.
pv_printf("$var(contact)", "$xavp(contacts[0]=>uri)");
xlog ("L_NOTICE", "var(contact)=$var(contact)\r\n");
On Thu, Mar 31, 2016 at 12:46 AM, Marrold <kamailio(a)marrold.co.uk> wrote:
Hi all,
I am having some issues using get_redirects() from the UAC_Redirect
module in conjunction with t_next_contacts from the TM Module. I've
searched Google and the list but the only references I can find are several
years old.
I am attempting to configure Kamailio so it if receives a 3XX redirect
message, it will store the Contacts it contains, and attempt them in 'Q'
parameter order.
So for the Contact below-
Contact: <sip:10.0.97.21:5060>;q=0.2,<sip:5.29.13.139:5060>;q=0.5.
I want Kamailio to try 5.29.13.139, and if that times out, or is rejected
in someway, try 10.0.97.21.
If I use t_relay rather than t_next_contacts, kamailio branches the calls
and relays them in parallel regardless of Q value - this is not what I want.
If I use t_next_contacts, it attempts 5.29.13.139 which is rejected with
a 401, but it doesn't attempt 5.29.13.139 and responds "408",
"Request
Timeout MH 2"
Relevant script section is below, has anyone been able to get this
working?
failure_route[302] {
if (t_check_status("302")){
xlog("L_ALERT","Failure Route: 302\n$mb");
get_redirects("*");
if (!t_load_contacts()) {
send_reply("500", "Server Internal Error - Cannot load
contacts MH");
exit;
};
if (!t_next_contacts()) {
t_reply("408", "Request Timeout MH");
} else {
t_on_failure("302");
t_relay();
exit;
};
} else if (t_check_status("[456][0-9][0-9]")){
if (!t_next_contacts()) {
t_reply("408", "Request Timeout MH 2");
} else {
t_on_failure("302");
t_relay();
exit;
}
}
}
Thanks,
Matthew
2969
days inactive
2974
days old
2 comments
1 participants
participants (1)
-
Marrold