30 Mar
2007
30 Mar
'07
3:23 p.m.
Bodin,
looks like the error has its roots in the radiusclient library:
rc_check_reply: received invalid reply digest from RADIUS server
I'm not a RADIUS expert, so I cannot say more than this.....:( ...maybe
try to use wireshark to see the packages between server and client radius.
regards,
bogdan
Bodin Bruno wrote:
Bogdan-Andrei Iancu a écrit :
Hi Bodin,
Have you try to see if your radius cfg is ok? see:
http://www.openser.org/docs/openser-radius-1.0.x.html#testing_radius_commun…
regards,
bogdan
Bodin Bruno wrote:
Hi,
Yes for sure. When a use 1.1.1 it work , and when I use 1.2 that
doesnt work, I thin k there is a difference between the two ...
thank
Bogdan-Andrei Iancu a écrit :
Hi Bodin,
look into the system log (/var/log/{syslog|messages}) to get the
error generated by the radius library.
regards,
bogdan
Bodin Bruno wrote:
> Same radius client config, same radius server config, just 1.2
> from 1.1.1 but an error :
>
> 5(23229) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed
>
> Radius server get a good authenticate but openser failed this
> after :(
On radius side, no error, in /var/log/messages there is only thise
line :
Mar 28 14:26:21 zebulon openser: rc_check_reply: received invalid
reply digest from RADIUS server
30 Mar
30 Mar
3:39 p.m.
New subject: [Users] 1.1.1 to 1.2 : radius failed
I'm tired of that problem, I'll continue my project with 1.1.1 and
expect a solution for futur :)
nevertheless thank for all :)
4:29 p.m.
New subject: [Users] 1.1.1 to 1.2 : radius failed
Hi,
I've just think about something, could it be possible it about a bug
between radiusclient or radiusclient-ng ( I try it with both) and
64bits platform ?
thank
4:32 p.m.
New subject: [Users] 1.1.1 to 1.2 : radius failed
Hi Bodin,
yes - it was reported such a bug on radiusclient for 64 bits platforms .
regards,
bogdan
Bodin Bruno wrote:
Hi,
I've just think about something, could it be possible it about a bug
between radiusclient or radiusclient-ng ( I try it with both) and
64bits platform ?
thank
4:34 p.m.
New subject: [Users] 1.1.1 to 1.2 : radius failed
There were in fact a few 64bits arch problem with radiusclient-ng
(don't know about freeradius client) that should be fixed on new
radiusclient-ng version.
Try to get the latest version and check it.
Samuel.
2007/3/30, Bodin Bruno <bbodin01(a)univ-lr.fr>fr>:
Hi,
I've just think about something, could it be possible it about a bug
between radiusclient or radiusclient-ng ( I try it with both) and
64bits platform ?
thank
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
4:38 p.m.
New subject: [Users] 1.1.1 to 1.2 : radius failed
samuel a écrit :
There were in fact a few 64bits arch problem with
radiusclient-ng
(don't know about freeradius client) that should be fixed on new
radiusclient-ng version.
Try to get the latest version and check it.
Samuel.
2007/3/30, Bodin Bruno <bbodin01(a)univ-lr.fr>fr>:
> Hi,
> I've just think about something, could it be possible it about a bug
> between radiusclient or radiusclient-ng ( I try it with both) and
> 64bits platform ?
>
> thank
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
I'm using radiusclient-ng 0.5.5.1-2-1 and radiusclient 1.1.5-2.1, both
for Suse 10.1.
there is most recent version ?
8:43 p.m.
New subject: [Users] 1.1.1 to 1.2 : radius failed
I'm on the way to put a 1.2.0 to run on a XEON machine running OpenSUSE 10.2
- 64 bits... The combination between Radiusclient-ng , FreeRadius and
Radiusclient (all from the distribution sources) gives me no problem at
all... everithing works fine...
What kind of problem/messages are You getting? Did You run FreeRadius and
Radiusclient manually to check what is happening?
Edson.
-----Original Message-----
From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On
Behalf Of Bodin Bruno
Sent: sexta-feira, 30 de março de 2007 11:38
To: samuel
Cc: users openser.org
Subject: Re: [Users] 1.1.1 to 1.2 : radius failed
samuel a écrit :
There were in fact a few 64bits arch problem with
radiusclient-ng
(don't know about freeradius client) that should be fixed on new
radiusclient-ng version.
Try to get the latest version and check it.
Samuel.
2007/3/30, Bodin Bruno <bbodin01(a)univ-lr.fr>fr>:
> Hi,
> I've just think about something, could it be possible it about a bug
> between radiusclient or radiusclient-ng ( I try it with both) and
> 64bits platform ?
>
> thank
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
I'm using radiusclient-ng 0.5.5.1-2-1 and radiusclient 1.1.5-2.1, both
for Suse 10.1.
there is most recent version ?
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6257
days inactive
6257
days old
6 comments
4 participants
participants (4)
-
Bodin Bruno -
Bogdan-Andrei Iancu -
Edson -
samuel