8 Jun
2005
8 Jun
'05
9:25 a.m.
Is it possible to specify multiple authentication credentials within the UAC
module? What I want to do is access multiple PSTN gateways that each require
different credentials. The basic purpose of this is to allow least cost
routing.
Example
Provider 1 offers cheap calling to +44 (UK)
Provider 2 offers cheap calling to +1 (US)
When user dials a 44 destination ser should relay to Provider 1 gateway,
which will require authentication using Credential 1.
When user dials a 1 destination ser should relay to Provider 2 gateway,
which will require authentication using Credential 2.
Any advice would be greatfully received.
Regards
Cameron
8 Jun
8 Jun
11:19 a.m.
Hi,
I think the better way is to register your proxy - the one that your users
are being routed through - to the PSTNs and simply forward their calls to
the desired PSTN. So you would charge your users for using a particular PSTN
on your own.
Regards,
Kaveh
-----Original Message-----
From: "Cameron Beattie" <kjcsb(a)orcon.net.nz>
To: <serusers(a)lists.iptel.org>
Date: Wed, 8 Jun 2005 17:25:44 +1200
Subject: [Serusers] UAC module: multiple PSTN gateways
Is it possible to specify multiple authentication
credentials within
the UAC
module? What I want to do is access multiple PSTN gateways that each
require
different credentials. The basic purpose of this is to allow least cost
routing.
Example
Provider 1 offers cheap calling to +44 (UK)
Provider 2 offers cheap calling to +1 (US)
When user dials a 44 destination ser should relay to Provider 1
gateway,
which will require authentication using Credential 1.
When user dials a 1 destination ser should relay to Provider 2 gateway,
which will require authentication using Credential 2.
Any advice would be greatfully received.
Regards
Cameron
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
21 Jun
21 Jun
8:58 a.m.
Thanks.
Do you do this and if so what are you using to register SER? Sipsak?
I have tried using sipsak to register SER with nufone's Asterisk server but
am having no luck.
Regards
Cameron Beattie
----- Original Message -----
From: "Kaveh Aasaraai" <kaveh(a)iranet.ir>
To: <serusers(a)lists.iptel.org>
Sent: Wednesday, June 08, 2005 7:19 PM
Subject: Re: [Serusers] UAC module: multiple PSTN gateways
Hi,
I think the better way is to register your proxy - the one that your users
are being routed through - to the PSTNs and simply forward their calls to
the desired PSTN. So you would charge your users for using a particular
PSTN
on your own.
Regards,
Kaveh
-----Original Message-----
From: "Cameron Beattie" <kjcsb(a)orcon.net.nz>
To: <serusers(a)lists.iptel.org>
Date: Wed, 8 Jun 2005 17:25:44 +1200
Subject: [Serusers] UAC module: multiple PSTN gateways
Is it possible to specify multiple authentication
credentials within
the UAC
module? What I want to do is access multiple PSTN gateways that each
require
different credentials. The basic purpose of this is to allow least cost
routing.
Example
Provider 1 offers cheap calling to +44 (UK)
Provider 2 offers cheap calling to +1 (US)
When user dials a 44 destination ser should relay to Provider 1
gateway,
which will require authentication using Credential 1.
When user dials a 1 destination ser should relay to Provider 2 gateway,
which will require authentication using Credential 2.
Any advice would be greatfully received.
Regards
Cameron
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
8 Jun
8 Jun
11:45 a.m.
Hi Cameron,
You can specify multiple authentication credentials by just enumerating
several "credential" parameters for the module:
modparam("uac","credential","user1:realm1:passwd1")
modparam("uac","credential","user2:realm2:passwd2")
modparam("uac","credential","user3:realm3:passwd3")
The module will choose the correct credentials to use based on the
"realm" from the auth challenge.
regards,
Marian
Cameron Beattie wrote:
Is it possible to specify multiple authentication
credentials within the
UAC module? What I want to do is access multiple PSTN gateways that each
require different credentials. The basic purpose of this is to allow
least cost routing.
Example
Provider 1 offers cheap calling to +44 (UK)
Provider 2 offers cheap calling to +1 (US)
When user dials a 44 destination ser should relay to Provider 1 gateway,
which will require authentication using Credential 1.
When user dials a 1 destination ser should relay to Provider 2 gateway,
which will require authentication using Credential 2.
Any advice would be greatfully received.
Regards
Cameron
--
Voice System
http://www.voice-system.ro
5 p.m.
Did you guys was able to use UAC module successfully?
If yes, would you please tell what version of ser and uac module you are
using?
Thanks,
MOhammad
Marian Dumitru wrote:
Hi Cameron,
You can specify multiple authentication credentials by just
enumerating several "credential" parameters for the module:
modparam("uac","credential","user1:realm1:passwd1")
modparam("uac","credential","user2:realm2:passwd2")
modparam("uac","credential","user3:realm3:passwd3")
The module will choose the correct credentials to use based on the
"realm" from the auth challenge.
regards,
Marian
Cameron Beattie wrote:
Is it possible to specify multiple authentication
credentials within
the UAC module? What I want to do is access multiple PSTN gateways
that each require different credentials. The basic purpose of this is
to allow least cost routing.
Example
Provider 1 offers cheap calling to +44 (UK)
Provider 2 offers cheap calling to +1 (US)
When user dials a 44 destination ser should relay to Provider 1
gateway, which will require authentication using Credential 1.
When user dials a 1 destination ser should relay to Provider 2
gateway, which will require authentication using Credential 2.
Any advice would be greatfully received.
Regards
Cameron
5:42 p.m.
Hi Mohammad,
have a look at an example:
http://www.voice-system.ro/docs/uac/ar01s06.html#ex_auth
the UAC module is present only in CVS head.
regards,
Marian
Mohammad Khan wrote:
Did you guys was able to use UAC module successfully?
If yes, would you please tell what version of ser and uac module you are
using?
Thanks,
MOhammad
Marian Dumitru wrote:
--
Voice System
http://www.voice-system.ro
Hi Cameron,
You can specify multiple authentication credentials by just
enumerating several "credential" parameters for the module:
modparam("uac","credential","user1:realm1:passwd1")
modparam("uac","credential","user2:realm2:passwd2")
modparam("uac","credential","user3:realm3:passwd3")
The module will choose the correct credentials to use based on the
"realm" from the auth challenge.
regards,
Marian
Cameron Beattie wrote:
Is it possible to specify multiple authentication
credentials within
the UAC module? What I want to do is access multiple PSTN gateways
that each require different credentials. The basic purpose of this is
to allow least cost routing.
Example
Provider 1 offers cheap calling to +44 (UK)
Provider 2 offers cheap calling to +1 (US)
When user dials a 44 destination ser should relay to Provider 1
gateway, which will require authentication using Credential 1.
When user dials a 1 destination ser should relay to Provider 2
gateway, which will require authentication using Credential 2.
Any advice would be greatfully received.
Regards
Cameron
7084
days inactive
7097
days old
5 comments
4 participants
participants (4)
-
Cameron Beattie -
Kaveh Aasaraai -
Marian Dumitru -
Mohammad Khan