Thanks Daniel, your help was very useful. With this I created a header by append_hf () before calling the function t_replicate and standby server retrieved the value of this header and assigns this value to the parameter avp Example $avp(s:rcv) = $hdr(IP-source); Best regards Raphael Hello, > > the received is taken from an avp specified by parameter received_avp > of registrar module: > > > http://kamailio.org/docs/modules/devel/modules/registrar.html#idp4433296 > > You can carry the original details via a header on the replicated > REGISTER (using append_hf()), then take the header on the second server and > store its value in the avp. > > Cheers, > Daniel > > > On 7/18/13 9:05 PM, Raphael Borges wrote: > > *Hello,* > > > I have two servers in kamailio duality, I am using the function > t_replicate () for replication log as below: > Server 1 active > t_replicate ("xxx.xxx.xxx.2", "5060"); > Server 2 reserves > t_replicate ("xxx.xxx.xxx.1", "5060"); > > But when the record is replicated to the standby server the parameter > received is being filled with the active server IP, where the IP would > Correro UAC, registry problems generating the backup server. > > Example > Server 1 active xxx.xxx.xxx.1 > > $ Kamctl ul show > Domain :: location table = 512 records = 1 = 1 max_slot > AOR :: 4301 > Contact :: sip: 4301(a)yyy.yyy.yyy.100; transport = > udp Q = > Expires :: 4566 > Callid :: ccd0431c-6a4c-1231-0a94-7356c4f466e6 > CSeq :: 46740150 > User-agent :: stepo_LITE > Received :: sip: yyy.yyy.yyy.100: 5060 > State :: CS_SYNC > Flags :: 0 > CFLAG :: 0 > Socket :: udp: xxx.xxx.xxx.1: 5060 > Methods :: 8159 > > Server 2 Reserve xxx.xxx.xxx.2 > > $ Kamctl ul show > Domain :: location table = 512 records = 1 = 1 max_slot > AOR :: 4301 > Contact :: sip: 4301(a)yyy.yyy.yyy.100; transport = > udp Q = > Expires :: 6665 > Callid :: ec7cfd42-6a7c-1231-0f94-7356c4f466e6 > CSeq :: 46750472 > User-agent :: stepo_LITE > Received :: sip: xxx.xxx.xxx.1: 5060 > State :: CS_SYNC > Flags :: 0 > CFLAG :: 0 > Socket :: udp: xxx.xxx.xxx.2: 5060 > Methods :: 8159 > > > > Tkanks > > Raphael > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > >

Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow? Thanks in advance. Raphael 2013/7/22 Raphael Borges <raphaelsilvaborges(a)gmail.com> > Thanks Daniel, your help was very useful. > > With this I created a header by append_hf () before calling the > function > t_replicate and standby server retrieved the value of this header and > assigns this value to the parameter avp > Example > $avp(s:rcv) = $hdr(IP-source); > > Best regards > Raphael > > > > Hello, >> >> the received is taken from an avp specified by parameter received_avp >> of registrar module: >> >> >> http://kamailio.org/docs/modules/devel/modules/registrar.html#idp4433296 >> >> You can carry the original details via a header on the replicated >> REGISTER (using append_hf()), then take the header on the second server and >> store its value in the avp. >> >> Cheers, >> Daniel >> >> >> On 7/18/13 9:05 PM, Raphael Borges wrote: >> >> *Hello,* >> >> >> I have two servers in kamailio duality, I am using the function >> t_replicate () for replication log as below: >> Server 1 active >> t_replicate ("xxx.xxx.xxx.2", "5060"); >> Server 2 reserves >> t_replicate ("xxx.xxx.xxx.1", "5060"); >> >> But when the record is replicated to the standby server the parameter >> received is being filled with the active server IP, where the IP would >> Correro UAC, registry problems generating the backup server. >> >> Example >> Server 1 active xxx.xxx.xxx.1 >> >> $ Kamctl ul show >> Domain :: location table = 512 records = 1 = 1 max_slot >> AOR :: 4301 >> Contact :: sip: 4301(a)yyy.yyy.yyy.100; transport = >> udp Q = >> Expires :: 4566 >> Callid :: >> ccd0431c-6a4c-1231-0a94-7356c4f466e6 >> CSeq :: 46740150 >> User-agent :: stepo_LITE >> Received :: sip: yyy.yyy.yyy.100: 5060 >> State :: CS_SYNC >> Flags :: 0 >> CFLAG :: 0 >> Socket :: udp: xxx.xxx.xxx.1: 5060 >> Methods :: 8159 >> >> Server 2 Reserve xxx.xxx.xxx.2 >> >> $ Kamctl ul show >> Domain :: location table = 512 records = 1 = 1 max_slot >> AOR :: 4301 >> Contact :: sip: 4301(a)yyy.yyy.yyy.100; transport = >> udp Q = >> Expires :: 6665 >> Callid :: >> ec7cfd42-6a7c-1231-0f94-7356c4f466e6 >> CSeq :: 46750472 >> User-agent :: stepo_LITE >> Received :: sip: xxx.xxx.xxx.1: 5060 >> State :: CS_SYNC >> Flags :: 0 >> CFLAG :: 0 >> Socket :: udp: xxx.xxx.xxx.2: 5060 >> Methods :: 8159 >> >> >> >> Tkanks >> >> Raphael >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> >> -- >> Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing >> list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> >> >