Hi all,

Is there anybody who make SER+RADIUS on the different machine? If I put both of them together on the same machine, it works fine. But if I seperate them, SER don't send any packet to RADIUS server and make an error log.

Belows are details.

============Softwares running on FreeBSD 5.3-STABLE======== - ser-0.8.14 - radiusclient-0.4.7 - freeradius-1.0.1

============= /usr/local/etc/ser/ser.cfg =================== loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclie nt.conf") modparam("auth_radius", "service_type", 15)

if (method=="REGISTER") { if (!radius_www_authorize("")) { www_challenge("", "0"); break; }; save("location"); break; };

============= /usr/local/etc/radiusclient/radiusclient.cfg ======== authserver 83.137.80.50

============= /usr/local/etc/radiusclient/servers ============== 83.137.80.50 rad_test

====================Error log in dmesg============================ Mar 1 18:00:19 test ser: rc_send_server: no reply from RADIUS server unknown:1812 Mar 1 18:00:49 test ser: rc_ip_hostname: couldn't look up host by addr: 53895032

I am looking for all the mail archive for this problem but in vain. Only one answer for this problem is Dawid Mielnik's post.(http://lists.iptel.org/pipermail/serusers/2004-October/011991.html)

Have a nice day. Thanks.

Alex.