Also you need the standard release 0.8.12. There were some changes afterwards into ser core code. This is not a big one, you can try replacing next lines:

ptr = build_lump_rpl(_hdr, _hdr_len); add_lump_rpl(_m, ptr);

with:

if (add_lump_rpl( _m, _hdr, _hdr_len, LUMP_RPL_HDR)==0) { LOG(L_ERR,"ERROR:gsm_send_resp: unable to append hdr\n"); return -1; }

I hope this is all. I will try to find some time this day to update the code, but I can't promise.

Daniel

On 8/30/2004 9:08 AM, aimable wrote:

I installed radiusclient version 0.3.3 from source and tried again to compile this module but i got the following error: challenge.c: In function `gsm_send_resp': challenge.c:119: warning: implicit declaration of function `build_lump_rpl' challenge.c:119: warning: assignment makes pointer from integer without a cast challenge.c:120: warning: passing arg 2 of `add_lump_rpl' from incompatible pointer type challenge.c:120: too few arguments to function `add_lump_rpl' make: *** [challenge.o] Error 1

I tried to install RPM package but still I am getting the same error. How can I solve this problem? Thanks .

-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@iptel.org] Sent: Friday, August 27, 2004 3:47 PM To: aimable Cc: serusers@lists.iptel.org Subject: Re: FW: [Serusers] Problems compiling GSM authentication module

You need a previous version, 0.3.x.

Daniel

On 8/27/2004 3:27 PM, aimable wrote:

...

I have radiusclient-0.4.3 installed .What version is the right one for the GSM module to compile? Should I use the previous versions ? Thanks again

-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@iptel.org] Sent: Friday, August 27, 2004 1:54 PM To: aimable Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Problems compiling GSM authentication module

You are using a wrong version of radiusclient library. What is yours? When I will find some time to spare I will update it to use radiusclient-ng library, to be the same as latest ser.

Daniel

On 8/27/2004 12:56 PM, aimable wrote:

...

Hi all,

I have been using SER for 6 months (together with Asterisk ) and every thing seems to be fine ( voicemail, accounting, authentication, NAT and so on)

But I recently wanted to test the GSM authentication module but when I tried to compile it and install it I failed .I am using version: ser 0.8.12-tcp_nonb (i386/linux) of SER on RH 9

Here is the error I get when I try to compile gsm module

auth_gsm.c:117: warning: passing arg 1 of `rc_conf_str' from incompatible pointer type

auth_gsm.c:117: too few arguments to function `rc_conf_str'

auth_gsm.c:117: warning: passing arg 1 of `rc_read_dictionary' from incompatible pointer type

auth_gsm.c:117: too few arguments to function `rc_read_dictionary'

make: *** [auth_gsm.o] Error 1

can anyone help me about this?

Thanks

---

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

Hi serusers, I just wanted to thank all of you for your contribution to the VOIP development in general and to my success in particular as of now I have successfully installed SER with NAT support (RTPPROXY), authentication, group checking/ACL, Voicemail2email, missed calls reporting, serweb together with Asterisk PBX as my gateway (with a Digium E1 card) and every thing is working fine even though I have started using Linux in January!!!.I even installed GSM module with the help of Dan with freeradius and radiusclient though I have not yet tested it.

Recently I wanted to test GSM module with the idea of connecting GSM mobile phones to SER box and making mobile calls using SIP ! Why not? If one can find a wireless access point working in the same frequency range as the mobile phones why would It would not work.

In any case, whether it can work or not, I just say May God Bless You aboundantly.

Habiyakare Aimable Voice Services Terracom Communications Tel :(250)08435550 SIP:04400104@voice.terracom.rw E-mail:aimable@terracom.rw MSN:aimable@terracom.rw

-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@iptel.org] Sent: Friday, September 17, 2004 12:44 PM To: aimable Cc: serusers@lists.iptel.org Subject: Re: FW: [Serusers] Problems compiling GSM authentication module

On 8/30/2004 11:03 AM, Daniel-Constantin Mierla wrote:

[...]

I hope this is all. I will try to find some time this day to update the code, but I can't promise.

I have just committed the updates for gsm_auth. The module should now work fine with ser 0.8.14. If you have problem applying the patches for auth and digest parser let me know. I do not have the testing environment up anymore, so I didn't do any test yet.

Daniel

Daniel

On 8/30/2004 9:08 AM, aimable wrote:

...

I installed radiusclient version 0.3.3 from source and tried again to compile this module but i got the following error: challenge.c: In function `gsm_send_resp': challenge.c:119: warning: implicit declaration of function `build_lump_rpl' challenge.c:119: warning: assignment makes pointer from integer without a cast challenge.c:120: warning: passing arg 2 of `add_lump_rpl' from incompatible pointer type challenge.c:120: too few arguments to function `add_lump_rpl' make: *** [challenge.o] Error 1

I tried to install RPM package but still I am getting the same error. How can I solve this problem? Thanks .

-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@iptel.org] Sent: Friday, August 27, 2004 3:47 PM To: aimable Cc: serusers@lists.iptel.org Subject: Re: FW: [Serusers] Problems compiling GSM authentication module

You need a previous version, 0.3.x.

Daniel

On 8/27/2004 3:27 PM, aimable wrote:

...

I have radiusclient-0.4.3 installed .What version is the right one for the GSM module to compile? Should I use the previous versions ? Thanks again

-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@iptel.org] Sent: Friday, August 27, 2004 1:54 PM To: aimable Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Problems compiling GSM authentication module

You are using a wrong version of radiusclient library. What is yours? When I will find some time to spare I will update it to use radiusclient-ng library, to be the same as latest ser.

Daniel

On 8/27/2004 12:56 PM, aimable wrote:

...

Hi all,

I have been using SER for 6 months (together with Asterisk ) and every thing seems to be fine ( voicemail, accounting, authentication, NAT and so on)

But I recently wanted to test the GSM authentication module but when I tried to compile it and install it I failed .I am using version: ser 0.8.12-tcp_nonb (i386/linux) of SER on RH 9

Here is the error I get when I try to compile gsm module

auth_gsm.c:117: warning: passing arg 1 of `rc_conf_str' from incompatible pointer type

auth_gsm.c:117: too few arguments to function `rc_conf_str'

auth_gsm.c:117: warning: passing arg 1 of `rc_read_dictionary' from incompatible pointer type

auth_gsm.c:117: too few arguments to function `rc_read_dictionary'

make: *** [auth_gsm.o] Error 1

can anyone help me about this?

Thanks

------------------------------------------------------------------------

...

...

...

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers