-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Greetings:
Hope you don't mind a question from someone just getting his feet wet :)
First off, if I want Kamailio to act as a SIP router among, say, a group of Asterisk PBXs (meaning, Kamailio will have no user registrations, but just pass SIP messages to and from the Asterisks), would I do this in the least cost routing table or in carrier routes table, or via another method? (assume for the moment that all the PBXs are under my control, these aren't connections outside my organization, no connections to the PSTN).
I figured it would be with lcr, so I tried compiling 3.0.0RC1 with that module removed from the exclude list. I received the following error on 'make install'
make[1]: Entering directory `/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr' make[1]: Leaving directory `/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr' config.mak included make[1]: Entering directory `/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -m32 - -minline-all-stringops -falign-loops -ftree-vectorize - -fno-strict-overflow -mtune=athlon64 -Wall -DNAME='"kamailio"' - -DVERSION='"3.0.0-rc1"' -DARCH='"i386"' -DOS='linux_' - -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 4.3.2"' -D__CPU_i386 -D__OS_linux - -DSER_VER=3000000 -DCFG_DIR='"/usr/local/etc/kamailio/"' -DPKG_MALLOC - -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP - -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER - -DUSE_DST_BLACKLIST -DUSE_NAPTR -DDBG_QM_MALLOC -DUSE_TLS -DTLS_HOOKS - -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 - -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN - -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL - -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_SCHED_SETSCHEDULER -DHAVE_EPOLL - -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DUSE_FUTEX -DHAVE_SELECT - -I/usr/local/include -I/usr/local/include -I/opt/include - -I/usr/sfw/include -DOPENSER_MOD_INTERFACE -DMOD_NAME='"lcr"' -c hash.c - -o hash.o In file included from hash.c:26: lcr_mod.h:34:18: error: pcre.h: No such file or directory In file included from hash.c:26: lcr_mod.h:51: error: expected specifier-qualifier-list before âpcreâ hash.c:34: error: expected declaration specifiers or â...â before âpcreâ hash.c: In function âlcr_hash_table_insertâ: hash.c:56: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ hash.c:56: error: âfrom_uri_reâ undeclared (first use in this function) hash.c:56: error: (Each undeclared identifier is reported only once hash.c:56: error: for each function it appears in.) hash.c:58: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:59: error: âstruct lcr_infoâ has no member named âfirst_gwâ hash.c:60: error: âstruct lcr_infoâ has no member named âpriorityâ hash.c:66: error: âstruct lcr_infoâ has no member named ânextâ hash.c: In function âlcr_hash_table_contents_freeâ: hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:107: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ hash.c:108: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ hash.c:110: error: âstruct lcr_infoâ has no member named ânextâ make[1]: *** [hash.o] Error 1 make[1]: Leaving directory `/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr' make: *** [install-modules] Error 1
If I leave lcr in the exclude list, I can make/make install, but if I try to add an entry into the lcr table, I get this error:
# kamctl lcr addgw labCM 172.16.59.6 5060 1 2 1 ERROR 1054 (42S22) at line 1: Unknown column 'ping' in 'field list' ERROR: lcr - SQL Error
System info: Kamailio 3.0.0 RC1 from GIT debian 5.0.3 (2.6.26-2-686) gcc -v Using built-in specs. Target: i486-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Debian 4.3.2-1.1' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs - --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr - --enable-shared --with-system-zlib --libexecdir=/usr/lib - --without-included-gettext --enable-threads=posix --enable-nls - --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 - --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc - --enable-mpfr --enable-targets=all --enable-cld - --enable-checking=release --build=i486-linux-gnu --host=i486-linux-gnu - --target=i486-linux-gnu Thread model: posix gcc version 4.3.2 (Debian 4.3.2-1.1)
Thank you!
El Miércoles, 4 de Noviembre de 2009, Andrew Gallo escribió:
In file included from hash.c:26: lcr_mod.h:34:18: error: pcre.h: No such file or directory
You must install pcre development library.
4 nov 2009 kl. 23.11 skrev Andrew Gallo:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Greetings:
Hope you don't mind a question from someone just getting his feet wet :)
First off, if I want Kamailio to act as a SIP router among, say, a group of Asterisk PBXs (meaning, Kamailio will have no user registrations, but just pass SIP messages to and from the Asterisks), would I do this in the least cost routing table or in carrier routes table, or via another method? (assume for the moment that all the PBXs are under my control, these aren't connections outside my organization, no connections to the PSTN).
If you want just to distribute the calls between the servers and have all the Asterisk severs do the same task, then dispatcher is the module you need. If each server has a different task, then you either hard code the dialplan into the configuration file or use one of the dialplan/routing modules. There are several with different flavours, and some of them are designed for a very specific task. If you have a very simple routing plan, you can just store variables (AVP's in Kamailian) in a database table and read them in or use the sql module.
Regards /O
Hello,
On 04.11.2009 23:11 Uhr, Andrew Gallo wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
[...] If I leave lcr in the exclude list, I can make/make install, but if I try to add an entry into the lcr table, I get this error:
# kamctl lcr addgw labCM 172.16.59.6 5060 1 2 1 ERROR 1054 (42S22) at line 1: Unknown column 'ping' in 'field list' ERROR: lcr - SQL Error
ping column is no longer in the gw table, probably was removed since 1.5 and kamctl not updated...
Cheers, Daniel
On 05.11.2009 11:31 Uhr, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
ping column is no longer in the gw table, probably was removed since 1.5 and kamctl not updated...
as i mentioned earlier, i don't consider ctl a viable option in configuring lcr module. there is simple too many fields in the tables.
understand, no problem with that.
Is there a place on wiki where you listed the changes in 3.0 since 1.5? There are some, but couldn't find about lcr: http://sip-router.org/wiki/migration/kamailio-tips
And more K 3.0 specific: http://www.kamailio.org/dokuwiki/doku.php/install:1.5.x-to-3.0.0
AFAIK, there were updates to table structure in lcr, permissions and maybe carrierroute. We have to collect them to help people migrate to Kamailio 3.0 and sip router.
Thanks, Daniel
Daniel-Constantin Mierla writes:
Is there a place on wiki where you listed the changes in 3.0 since 1.5?
see http://sip-router.org/wiki/features/new-in-devel
-- juha
On 05.11.2009 12:05 Uhr, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
Is there a place on wiki where you listed the changes in 3.0 since 1.5?
I know that page, but doesn't mention anything about removal/addition of new columns in db structure -- this is what I was looking for.
Daniel
On 05.11.2009 12:34 Uhr, Juha Heinanen wrote:
Daniel-Constantin Mierla writes:
I know that page, but doesn't mention anything about removal/addition of new columns in db structure -- this is what I was looking for.
i just added there info also about db changes.
thanks! Did you do some updates to db structure of permissions module?
Cheers, Daniel
On Donnerstag, 5. November 2009, Daniel-Constantin Mierla wrote:
AFAIK, there were updates to table structure in lcr, permissions and maybe carrierroute. We have to collect them to help people migrate to Kamailio 3.0 and sip router.
Hi Daniel,
the cr database scheme was not changed from 1.5 to 3.0.
Cheers,
Henning
On 05.11.2009 12:24 Uhr, Henning Westerholt wrote:
On Donnerstag, 5. November 2009, Daniel-Constantin Mierla wrote:
AFAIK, there were updates to table structure in lcr, permissions and maybe carrierroute. We have to collect them to help people migrate to Kamailio 3.0 and sip router.
Hi Daniel,
the cr database scheme was not changed from 1.5 to 3.0.
thanks Henning, this is good from migration point of view! There was some work on the module and I couldn't be sure what was touched ...
Cheers, Daniel
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Daniel-Constantin Mierla wrote:
Hello,
On 04.11.2009 23:11 Uhr, Andrew Gallo wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
[...] If I leave lcr in the exclude list, I can make/make install, but if I try to add an entry into the lcr table, I get this error:
# kamctl lcr addgw labCM 172.16.59.6 5060 1 2 1 ERROR 1054 (42S22) at line 1: Unknown column 'ping' in 'field list' ERROR: lcr - SQL Error
ping column is no longer in the gw table, probably was removed since 1.5 and kamctl not updated...
Cheers, Daniel
Thank you folks for the great information. I'll continue to play around and learn :)
-
Andrew Gallo -
Daniel-Constantin Mierla -
Henning Westerholt -
Iñaki Baz Castillo -
jh＠tutpro.com -
Olle E. Johansson