Hi,
may be a trivial problem. I use ser 0.8.14 and cisco as5350. When ser sends 404 to an INVITE came from ISDN pri, cisco doesn't close ISDN path immediately (after some timeout does)
Feb 20 21:37:35.716: //8/1677FFB88005/SIP/Call/sipSPICallInfo: Disconnect Cause (CC) : 1 Disconnect Cause (SIP) : 404
How can I enable/forward cause code to PSTN side ?
thanks, imedve
On the 5300 try "sho sip-ua map sip-pstn". You should see the mapping. You can change this is the sip config.
Medve Istvan wrote:
Hi,
may be a trivial problem. I use ser 0.8.14 and cisco as5350. When ser sends 404 to an INVITE came from ISDN pri, cisco doesn't close ISDN path immediately (after some timeout does)
Feb 20 21:37:35.716: //8/1677FFB88005/SIP/Call/sipSPICallInfo: Disconnect Cause (CC) : 1 Disconnect Cause (SIP) : 404
How can I enable/forward cause code to PSTN side ?
thanks, imedve
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
You could try and setup this is config-sip-ua# set pstn-cause 1 sip-status 404"
ThX Mohamed "Hi,
may be a trivial problem. I use ser 0.8.14 and cisco as5350. When ser sends 404 to an INVITE came from ISDN pri, cisco doesn't close ISDN path immediately (after some timeout does)
Feb 20 21:37:35.716: //8/1677FFB88005/SIP/Call/sipSPICallInfo: Disconnect Cause (CC) : 1 Disconnect Cause (SIP) : 404
How can I enable/forward cause code to PSTN side ?
thanks, imedve
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
--------------------------------- Post your free ad now! Yahoo! Canada Personals
-
Medve Istvan -
Mohamed Omar -
Steve Blair