I've set the re-reg. to 1 minute but same problem.
This is the log from X-Lite when I try to call the user ('vicky' @ LAN with ser; user 'claudio' behind Nat) : I receive this message on teh X.Lite screen : "We don't forward to private IP addresses"
---- Log ----
RECEIVE TIME: 21141441 RECEIVE << 80.105.2.110:5060 SIP/2.0 479 We don't forward to private IP addresses Via: SIP/2.0/UDP 192.168.0.102:5060;rport=12810;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB;received=62.101.126.230 From: claudio sip:claudio@80.105.2.110;tag=546620589 To: sip:vicky@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.75e6 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31@192.168.0.102 CSeq: 53348 INVITE Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=12810 in_uri=sip:vicky@80.105.2.110 out_uri=sip:vicky@10.0.0.100:5060 via_cnt==1"
SEND TIME: 21141444 SEND >> 80.105.2.110:5060 ACK sip:vicky@80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.102:5060;rport;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB From: claudio sip:claudio@80.105.2.110;tag=546620589 To: sip:vicky@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.75e6 Contact: sip:claudio@192.168.0.102:5060 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31@192.168.0.102 CSeq: 53348 ACK Max-Forwards: 70 Content-Length: 0
-----
Try in your X-Lite set the Re-Registration to one minute then the default 1800. Advanced Settings-> SIP settings -> ReRegister proxy Ser will not detect the user agent as behind NAT and does not keep the binding alive. I don't know how it is done in Asterisk. Maybe Asterisk keeps in touch with User agents by sending keep-alives no matter if the UA is behind NAT or not.
Ladislav
Americania .it wrote:
What should I do? Something to set ? Why if I use the asterisk server instead of the ser one and the same voip clients (using users with the nat flag enabled) I can enstablish the communication without any problem ?
Should I open port 8000 on the router of the Lan ?
I 've attached the X-Lite Log when logging in :
© 2005 CounterPath Solutions Inc. All rights reserved. X-Lite release 1105x build stamp 21407 License key: B608ADE2A7C14E53835E7FF2EFAE95D0
Established SIP protocol listen on: 192.168.0.102:5060
NAT firewall type discovered is forced.
Discovered Symmetric NAT Firewall
SIP: 192.168.0.102:5060 RTP: 192.168.0.102:8000 NAT: 62.101.126.230
PROXY#0: 80.105.2.110:5060
SEND TIME: 1079327 SEND >> 80.105.2.110:5060 REGISTER sip:80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 62.101.126.230:5060;rport;branch=z9hG4bK01C14B200F494466A016FE0E0E46B658 From: claudio sip:claudio@80.105.2.110;tag=4251097143 To: claudio sip:claudio@80.105.2.110 Contact: "claudio" sip:claudio@62.101.126.230:5060 Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD@80.105.2.110 CSeq: 9157 REGISTER Expires: 1800 Max-Forwards: 70 User-Agent: X-Lite release 1105x Content-Length: 0
RECEIVE TIME: 1079425 RECEIVE << 80.105.2.110:5060 SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP 62.101.126.230:5060;rport=39914;branch=z9hG4bK01C14B200F494466A016FE0E0E46B658
From: claudio sip:claudio@80.105.2.110;tag=4251097143 To: claudio sip:claudio@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.4235 Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD@80.105.2.110 CSeq: 9157 REGISTER WWW-Authenticate: Digest realm="80.105.2.110", nonce="446f5b8ae893e0b8c2a781a06a5257a485ebe0b6" Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=39914 in_uri=sip:80.105.2.110 out_uri=sip:80.105.2.110 via_cnt==1"
SEND TIME: 1079427 SEND >> 80.105.2.110:5060 REGISTER sip:80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 62.101.126.230:5060;rport;branch=z9hG4bKF82CE6FE2C624791B7ABF06D7B8E7BFD From: claudio sip:claudio@80.105.2.110;tag=4251097143 To: claudio sip:claudio@80.105.2.110 Contact: "claudio" sip:claudio@62.101.126.230:5060 Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD@80.105.2.110 CSeq: 9158 REGISTER Expires: 1800 Authorization: Digest username="claudio",realm="80.105.2.110",nonce="446f5b8ae893e0b8c2a781a06a5257a485ebe0b6",response="91b05be86378bf515209116e96bd6314",uri="sip:80.105.2.110"
Max-Forwards: 70 User-Agent: X-Lite release 1105x Content-Length: 0
RECEIVE TIME: 1079533 RECEIVE << 80.105.2.110:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 62.101.126.230:5060;rport=39914;branch=z9hG4bKF82CE6FE2C624791B7ABF06D7B8E7BFD
From: claudio sip:claudio@80.105.2.110;tag=4251097143 To: claudio sip:claudio@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.d540 Call-ID: 4DAD46A40FE546019F15CFD05AAE23FD@80.105.2.110 CSeq: 9158 REGISTER Contact: sip:claudio@62.101.126.230:5060;expires=1800 Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=39914 in_uri=sip:80.105.2.110 out_uri=sip:80.105.2.110 via_cnt==1"
Hi, probably the solution might be that your user agent in public will have to re-register every minute or shorter time. It is because the NAT binding between SER and the public user will be closed if there is no SIP traffic.
Ladislav
Americania .it wrote:
I've installed ser 0.9.4 on Suse 10 and it's running with mysql.
I can register users (I'm using serweb) but I can only make a call from a user inside the Lan (where ser is installed) to a user outside behind a Nat (Fastweb network in Italy, Natted). If i call from this user behind Nat the call does not reach the other user. Viceversa it works fine.
I installed the nathelper module and rtpproxy too.
I don't know if I configured it well . Have I got to open some additional port in my router on the lan where ser is running (I opened port 5060 udp and tcp only)?
I've tried to use Asterix on another pc in the same lan and I don't have this kind of problems with the some users and some clients (3cx phone).
Any suggestions ?
thanks
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Try to remove this condition if you have it in your ser.cfg uri=~"[@:](192.168.|10.|172.(1[6-9]|2[0-9]|3[0-1]).)"
if it does not help . send all your ser.cfg to the list
Ladislav
Americania .it wrote:
I've set the re-reg. to 1 minute but same problem.
This is the log from X-Lite when I try to call the user ('vicky' @ LAN with ser; user 'claudio' behind Nat) : I receive this message on teh X.Lite screen : "We don't forward to private IP addresses"
---- Log ----
RECEIVE TIME: 21141441 RECEIVE << 80.105.2.110:5060 SIP/2.0 479 We don't forward to private IP addresses Via: SIP/2.0/UDP 192.168.0.102:5060;rport=12810;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB;received=62.101.126.230
From: claudio sip:claudio@80.105.2.110;tag=546620589 To: sip:vicky@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.75e6 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31@192.168.0.102 CSeq: 53348 INVITE Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=12810 in_uri=sip:vicky@80.105.2.110 out_uri=sip:vicky@10.0.0.100:5060 via_cnt==1"
SEND TIME: 21141444 SEND >> 80.105.2.110:5060 ACK sip:vicky@80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.102:5060;rport;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB From: claudio sip:claudio@80.105.2.110;tag=546620589 To: sip:vicky@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.75e6 Contact: sip:claudio@192.168.0.102:5060 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31@192.168.0.102 CSeq: 53348 ACK Max-Forwards: 70 Content-Length: 0
I think you should set Send Internal IP to "Always" inside the SIP proxy config. Please, try.
On 5/22/06, Ladislav Andel ladia6@centrum.cz wrote:
Try to remove this condition if you have it in your ser.cfg uri=~"[@:](192.168.|10.|172.(1[6-9]|2[0-9]|3[0-1]).)"
if it does not help . send all your ser.cfg to the list
Ladislav
Americania .it wrote:
I've set the re-reg. to 1 minute but same problem.
This is the log from X-Lite when I try to call the user ('vicky' @ LAN with ser; user 'claudio' behind Nat) : I receive this message on teh X.Lite screen : "We don't forward to private IP addresses"
---- Log ----
RECEIVE TIME: 21141441 RECEIVE << 80.105.2.110:5060 SIP/2.0 479 We don't forward to private IP addresses Via: SIP/2.0/UDP 192.168.0.102:5060;rport=12810;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB;received=62.101.126.230
From: claudio sip:claudio@80.105.2.110;tag=546620589 To: sip:vicky@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.75e6 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31@192.168.0.102 CSeq: 53348 INVITE Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=12810 in_uri=sip:vicky@80.105.2.110 out_uri=sip:vicky@10.0.0.100:5060 via_cnt==1"
SEND TIME: 21141444 SEND >> 80.105.2.110:5060 ACK sip:vicky@80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.102:5060;rport;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB From: claudio sip:claudio@80.105.2.110;tag=546620589 To: sip:vicky@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.75e6 Contact: sip:claudio@192.168.0.102:5060 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31@192.168.0.102 CSeq: 53348 ACK Max-Forwards: 70 Content-Length: 0
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
YES !! it was that line ! I removed that line and now it works even from my Natted pc.
Thanks very much !
From: Ladislav Andel ladia6@centrum.cz To: serusers@lists.iptel.org Subject: Re: [Serusers] ser: cannot call behind a Nat using rtpproxy Date: Mon, 22 May 2006 15:23:57 +0200
Try to remove this condition if you have it in your ser.cfg uri=~"[@:](192.168.|10.|172.(1[6-9]|2[0-9]|3[0-1]).)"
if it does not help . send all your ser.cfg to the list
Ladislav
Americania .it wrote:
I've set the re-reg. to 1 minute but same problem.
This is the log from X-Lite when I try to call the user ('vicky' @ LAN with ser; user 'claudio' behind Nat) : I receive this message on teh X.Lite screen : "We don't forward to private IP addresses"
---- Log ----
RECEIVE TIME: 21141441 RECEIVE << 80.105.2.110:5060 SIP/2.0 479 We don't forward to private IP addresses Via: SIP/2.0/UDP 192.168.0.102:5060;rport=12810;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB;received=62.101.126.230
From: claudio sip:claudio@80.105.2.110;tag=546620589 To: sip:vicky@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.75e6 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31@192.168.0.102 CSeq: 53348 INVITE Server: Sip EXpress router (0.9.4 (i386/linux)) Content-Length: 0 Warning: 392 10.0.0.133:5060 "Noisy feedback tells: pid=13858 req_src_ip=62.101.126.230 req_src_port=12810 in_uri=sip:vicky@80.105.2.110 out_uri=sip:vicky@10.0.0.100:5060 via_cnt==1"
SEND TIME: 21141444 SEND >> 80.105.2.110:5060 ACK sip:vicky@80.105.2.110 SIP/2.0 Via: SIP/2.0/UDP 192.168.0.102:5060;rport;branch=z9hG4bK88EC2781C2F64AFA8F9194EE403C60CB From: claudio sip:claudio@80.105.2.110;tag=546620589 To: sip:vicky@80.105.2.110;tag=2a08c327b8d597781b526eaf86695180.75e6 Contact: sip:claudio@192.168.0.102:5060 Call-ID: 01FB4B57-F823-44D9-B54A-B203472DEE31@192.168.0.102 CSeq: 53348 ACK Max-Forwards: 70 Content-Length: 0
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Americania .it -
Andrey Kouprianov -
Ladislav Andel