Hi guys, I'm give up with SEMS as media server for voicemail cause it can't successly run although I've followed how to install SEMS at http://ftp.iptel.org/pub/sems/doc/current/Configure-Sems-Ser-HOWTO.html and there is no answer for the problem So I decide to try Asterisk as the voicemail server. But I never use Asterisk before. I really need help in configuring Asterisk. What should I have (the softwares) before compiling and configuring Asterisk as voicemail server. Thanx for the attention.
Regards,
Meidiana
____________________________________________________________________________________ Expecting? Get great news right away with email Auto-Check. Try the Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html
8 mar 2007 kl. 10.22 skrev Meidiana Ten:
Hi guys, I'm give up with SEMS as media server for voicemail cause it can't successly run although I've followed how to install SEMS at http://ftp.iptel.org/pub/sems/doc/current/Configure-Sems-Ser- HOWTO.html and there is no answer for the problem So I decide to try Asterisk as the voicemail server. But I never use Asterisk before. I really need help in configuring Asterisk. What should I have (the softwares) before compiling and configuring Asterisk as voicemail server.
There's a lot of documentation available on the network for how to configure and setup Asterisk. There's even a whole book on the topic available on http://www.asteriskdocs.org
The Voip-Info wiki also contains a lot of documentation, http://www.voip-info.org
Regards, /Olle
If you have and extra PC or PC powerful enough to use VMWare, then better visit trixbox.org... Trixbox is an Asterisk package with web interface to configure everything, including voicemail, conf rooms, routes, etc. Really easy to use, as opposed to configuring Asterisk manually.
On 3/8/07, Olle E Johansson oej@edvina.net wrote:
8 mar 2007 kl. 10.22 skrev Meidiana Ten:
Hi guys, I'm give up with SEMS as media server for voicemail cause it can't successly run although I've followed how to install SEMS at http://ftp.iptel.org/pub/sems/doc/current/Configure-Sems-Ser- HOWTO.html and there is no answer for the problem So I decide to try Asterisk as the voicemail server. But I never use Asterisk before. I really need help in configuring Asterisk. What should I have (the softwares) before compiling and configuring Asterisk as voicemail server.
There's a lot of documentation available on the network for how to configure and setup Asterisk. There's even a whole book on the topic available on http://www.asteriskdocs.org
The Voip-Info wiki also contains a lot of documentation, http://www.voip-info.org
Regards, /Olle _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
An advice: If you don't get answers on iptel.org mailing lists, its most often because you have not formulated the problem in a way that makes it easy to answer. I cannot see why you shouldn't be successful with SEMS when so many others are. g-) PS: For Asterisk help, you are better off subscribing to Asterisk mailing lists. And visiting http://www.asterisk.org/ before shooting off a beginner post to thousands of subscribers might also be smart.
Meidiana Ten wrote:
Hi guys, I'm give up with SEMS as media server for voicemail cause it can't successly run although I've followed how to install SEMS at http://ftp.iptel.org/pub/sems/doc/current/Configure-Sems-Ser-HOWTO.html and there is no answer for the problem So I decide to try Asterisk as the voicemail server. But I never use Asterisk before. I really need help in configuring Asterisk. What should I have (the softwares) before compiling and configuring Asterisk as voicemail server. Thanx for the attention.
Regards,
Meidiana
Expecting? Get great news right away with email Auto-Check. Try the Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi.. Thanx for replying my question. Bout the advises, I really thank you too. I'd like to try for the last time in using SEMS, but I need some explanation for a few questions below.. Do you think if the the version of SER can cause SEMS doesn't run? I'm using SER 0.9.7 now. My ser.cfg doesn't recognize syntax below: modparam("tm", "pass_provisional_replies", 1) is it because of the version of SER also? Then I used to test my SER with 2 UA. UAs are all online, let's say A and B. A calls B but B doesn't reply, so it will surely forward to voicemail (115), but at A softphone appear that call is fail:not found. Do I need to add table to store this voicemail? Below is the debugs: 2(6454) method: <INVITE> 2(6454) uri: sip:115@pcr.ac.id 2(6454) version: <SIP/2.0> 2(6454) parse_headers: flags=1 2(6454) Found param type 232, <branch> = <z9hG4bK-d87543-c22df90c7830ca15-1--d87543->; state=6 2(6454) Found param type 235, <rport> = <n/a>; state=17 2(6454) end of header reached, state=5 2(6454) parse_headers: Via found, flags=1 2(6454) parse_headers: this is the first via 2(6454) After parse_msg... 2(6454) preparing to run routing scripts... 2(6454) parse_headers: flags=128 2(6454) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(6454) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16 2(6454) parse_headers: flags=8 2(6454) end of header reached, state=9 2(6454) DEBUG: get_hdr_field: <To> [28]; uri=[sip:feri@pcr.ac.id] 2(6454) DEBUG: to body ["feri"sip:feri@pcr.ac.id 2(6454) DEBUG: add_param: tag=753b0f7b 2(6454) end of header reached, state=29 2(6454) parse_headers: flags=256 2(6454) get_hdr_field: cseq <CSeq>: <2> <INVITE> 2(6454) DEBUG: get_hdr_body : content_length=444 2(6454) found end of header 2(6454) find_first_route: No Route headers found 2(6454) loose_route: There is no Route HF 2(6454) is_local(): Realm 'pcr.ac.id' is local 2(6454) lookup(): '115' Not found in usrloc 2(6454) DEBUG: t_newtran: msg id=33 , global msg id=32 , T on entrance=0xffffffff 2(6454) parse_headers: flags=-1 2(6454) parse_headers: flags=60 2(6454) t_lookup_request: start searching: hash=28438, isACK=0 2(6454) DEBUG: RFC3261 transaction matching failed 2(6454) DEBUG: t_lookup_request: no transaction found 2(6454) DEBUG: t_check: msg id=33 global id=33 T start=0x422e8d08 2(6454) DEBUG: t_check: T already found! 2(6454) parse_headers: flags=-1 2(6454) check_via_address(202.95.149.45, 202.95.149.45, 0) 2(6454) WARNING:vqm_resize: resize(0) called 2(6454) DEBUG: cleanup_uac_timers: RETR/FR timers reset 2(6454) DEBUG: add_to_tail_of_timer[4]: 0x422e8db4 2(6454) DEBUG: add_to_tail_of_timer[0]: 0x422e8dc4 2(6454) DEBUG: reply sent out. buf=0x81084b0: SIP/2.0 4..., shmem=0x422c2f08: SIP/2.0 4 2(6454) DEBUG: _reply_light: finished 2(6454) DEBUG:destroy_avp_list: destroying list (nil) 2(6454) receive_msg: cleaning up
Thanx Regards,
Meidiana
--------------------------------- Don't get soaked. Take a quick peek at the forecast with theYahoo! Search weather shortcut.
Hello,
there is a tutorial on the website about setting up a voicemail server with SEMS on port 5070: http://www.iptel.org/howto_sems_voicemail
If you have problems in setting up this please let us know at which step it does not work so we can help you better and fix the howto as well.
When you have set up this then for the INVITE you want to send to voicemail you only need to * add a header P-Email-Address containing the email address the email should be sent to (e.g. append_hf("P-Email-Address: gotcha_em@yahoo.com\r\n") * t_relay to port 5070
hth Stefan
Meidiana Ten wrote:
Hi.. Thanx for replying my question. Bout the advises, I really thank you too. I'd like to try for the last time in using SEMS, but I need some explanation for a few questions below.. Do you think if the the version of SER can cause SEMS doesn't run? I'm using SER 0.9.7 now. My ser.cfg doesn't recognize syntax below: modparam("tm", "pass_provisional_replies", 1) is it because of the version of SER also? Then I used to test my SER with 2 UA. UAs are all online, let's say A and B. A calls B but B doesn't reply, so it will surely forward to voicemail (115), but at A softphone appear that call is fail:not found. Do I need to add table to store this voicemail? Below is the debugs: 2(6454) method: <INVITE> 2(6454) uri: sip:115@pcr.ac.id 2(6454) version: <SIP/2.0> 2(6454) parse_headers: flags=1 2(6454) Found param type 232, <branch> = <z9hG4bK-d87543-c22df90c7830ca15-1--d87543->; state=6 2(6454) Found param type 235, <rport> = <n/a>; state=17 2(6454) end of header reached, state=5 2(6454) parse_headers: Via found, flags=1 2(6454) parse_headers: this is the first via 2(6454) After parse_msg... 2(6454) preparing to run routing scripts... 2(6454) parse_headers: flags=128 2(6454) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(6454) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16 2(6454) parse_headers: flags=8 2(6454) end of header reached, state=9 2(6454) DEBUG: get_hdr_field: <To> [28]; uri=[sip:feri@pcr.ac.id] 2(6454) DEBUG: to body ["feri"<sip:feri@pcr.ac.id mailto:feri@pcr.ac.id> 2(6454) DEBUG: add_param: tag=753b0f7b 2(6454) end of header reached, state=29 2(6454) parse_headers: flags=256 2(6454) get_hdr_field: cseq <CSeq>: <2> <INVITE> 2(6454) DEBUG: get_hdr_body : content_length=444 2(6454) found end of header 2(6454) find_first_route: No Route headers found 2(6454) loose_route: There is no Route HF 2(6454) is_local(): Realm 'pcr.ac.id' is local 2(6454) lookup(): '115' Not found in usrloc 2(6454) DEBUG: t_newtran: msg id=33 , global msg id=32 , T on entrance=0xffffffff 2(6454) parse_headers: flags=-1 2(6454) parse_headers: flags=60 2(6454) t_lookup_request: start searching: hash=28438, isACK=0 2(6454) DEBUG: RFC3261 transaction matching failed 2(6454) DEBUG: t_lookup_request: no transaction found 2(6454) DEBUG: t_check: msg id=33 global id=33 T start=0x422e8d08 2(6454) DEBUG: t_check: T already found! 2(6454) parse_headers: flags=-1 2(6454) check_via_address(202.95.149.45, 202.95.149.45, 0) 2(6454) WARNING:vqm_resize: resize(0) called 2(6454) DEBUG: cleanup_uac_timers: RETR/FR timers reset 2(6454) DEBUG: add_to_tail_of_timer[4]: 0x422e8db4 2(6454) DEBUG: add_to_tail_of_timer[0]: 0x422e8dc4 2(6454) DEBUG: reply sent out. buf=0x81084b0: SIP/2.0 4..., shmem=0x422c2f08: SIP/2.0 4 2(6454) DEBUG: _reply_light: finished 2(6454) DEBUG:destroy_avp_list: destroying list (nil) 2(6454) receive_msg: cleaning up
Thanx Regards,
Meidiana
Don't get soaked. Take a quick peek at the forecast < http://tools.search.yahoo.com/shortcuts/?fr=oni_on_mail&#news%3E with theYahoo! Search weather shortcut. < http://tools.search.yahoo.com/shortcuts/?fr=oni_on_mail&#news%3E
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi, I still have problem when forwarding call to voicemail I thought I have configured it the right way As your advise, I add append_hf into my ser.cfg before t_relaying
if (uri =~ "sip:1.*@") { log("Forwarding to 5070"); rewritehostport("localhost:5070"); append_hf("P-Email-Address:voicemail@pcr.ac.id\r\n"); t_relay_to_udp("localhost","5070"); break; }
is that true btw?? the address I used is from one of aliases I added to SER database it still can't work when the call forwards to voicemail. for additional info, I configured the eyebeam to call 115@pcr.ac.id to forward to voicemail and 113@pcr.ac.id to check for voicemail.Hmm..tell me if I'm wrong my sems.conf is below. thanx for the attention
Regards,
Meidiana
# $Id: sems.conf.sample,v 1.21 2005/01/05 16:48:04 sayer Exp $ # # sems.conf.sample # # Sip Express Media Server (sems) # # sample configuration file # # # whitespaces (spaces and tabs) are ignored # comments start with a "#" and may be used inline # # example: option=value # i like this option #
plugin_config_path=/opt/sems-vm/etc/sems/
# optional parameter: fork={yes|no} # # - specifies if sems should run in daemon mode (background) # (fork=no is the same as -E) fork=yes
# optional parameter: stderr={yes|no} # # - debug mode: do not fork and log to stderr # (stderr=yes is the same as -E) stderr=yes
# optionqal parameter: loglevel={0|1|2|3} # # - sets log level (error=0, warning=1, info=2, debug=3) # (same as -D) loglevel=2
# optional parameter: socket_name=<filename> # # - path and file name of our unix socket socket_name=/tmp/sems_sock
reply_socket_name=/tmp/sems_rsp_sock
# optional parameter: ser_socket_name=<filename> # # - path and file name of Ser's unix socket ser_socket_name=/tmp/ser_sock
# optional parameter: plugin_path=<path> # # - sets the path to the plug-ins # - may be absolute or relative to CWD plugin_path=/opt/sems-vm/lib/sems/plug-in
# optional parameter: smtp_server=<hostname> # # - sets address of smtp server smtp_server=mail
# optional parameter: smtp_port=<port> # # - sets port of smtp server smtp_port=25
# optional parameter: rtp_low_port=<port> # # - sets port of rtp lowest server rtp_low_port=10000
# optional parameter: rtp_high_port=<port> # # - sets port of rtp highest server rtp_high_port=60000
# optional parameter: media_processor_threads=<num_value> # # - controls how many threads should be created that # process media - on single-processor systems set this # parameter to 1 (default), on MP systems to a higher # value media_processor_threads=1
config.voicemail=inline #CFGOPTION_SEMS_ANNOUNCEPATH announce_path=/opt/sems-vm/lib/sems/audio/ #ENDCFGOPTION
#CFGOPTION_SEMS_ANNOUNCEMENT default_announce=default_en.wav #ENDCFGOPTION
#CFGOPTION_SEMS_RECORDTIME max_record_time=30 #ENDCFGOPTION
#CFGOPTION_SEMS_TEMPLATEDIR email_template_path=/opt/sems-vm/etc/sems/ #ENDCFGOPTION config.voicemail=end
--------------------------------- Food fight? Enjoy some healthy debate in the Yahoo! Answers Food & Drink Q&A.
Hello,
Meidiana Ten wrote:
Hi, I still have problem when forwarding call to voicemail I thought I have configured it the right way As your advise, I add append_hf into my ser.cfg before t_relaying
if (uri =~ "sip:1.*@") { log("Forwarding to 5070"); rewritehostport("localhost:5070"); append_hf("P-Email-Address:voicemail@pcr.ac.id\r\n"); t_relay_to_udp("localhost","5070"); break; }
that looks correct.
what does the SEMS log look like if you start it with -D 3 -E ?
Stefan
is that true btw?? the address I used is from one of aliases I added to SER database it still can't work when the call forwards to voicemail. for additional info, I configured the eyebeam to call 115@pcr.ac.id mailto:115@pcr.ac.id to forward to voicemail and 113@pcr.ac.id mailto:113@pcr.ac.id to check for voicemail.Hmm..tell me if I'm wrong my sems.conf is below. thanx for the attention
Regards,
Meidiana
# $Id: sems.conf.sample,v 1.21 2005/01/05 16:48:04 sayer Exp $ # # sems.conf.sample # # Sip Express Media Server (sems) # # sample configuration file # # # whitespaces (spaces and tabs) are ignored # comments start with a "#" and may be used inline # # example: option=value # i like this option #
plugin_config_path=/opt/sems-vm/etc/sems/
# optional parameter: fork={yes|no} # # - specifies if sems should run in daemon mode (background) # (fork=no is the same as -E) fork=yes
# optional parameter: stderr={yes|no} # # - debug mode: do not fork and log to stderr # (stderr=yes is the same as -E) stderr=yes
# optionqal parameter: loglevel={0|1|2|3} # # - sets log level (error=0, warning=1, info=2, debug=3) # (same as -D) loglevel=2
# optional parameter: socket_name=<filename> # # - path and file name of our unix socket socket_name=/tmp/sems_sock
reply_socket_name=/tmp/sems_rsp_sock
# optional parameter: ser_socket_name=<filename> # # - path and file name of Ser's unix socket ser_socket_name=/tmp/ser_sock
# optional parameter: plugin_path=<path> # # - sets the path to the plug-ins # - may be absolute or relative to CWD plugin_path=/opt/sems-vm/lib/sems/plug-in
# optional parameter: smtp_server=<hostname> # # - sets address of smtp server smtp_server=mail
# optional parameter: smtp_port=<port> # # - sets port of smtp server smtp_port=25
# optional parameter: rtp_low_port=<port> # # - sets port of rtp lowest server rtp_low_port=10000
# optional parameter: rtp_high_port=<port> # # - sets port of rtp highest server rtp_high_port=60000
# optional parameter: media_processor_threads=<num_value> # # - controls how many threads should be created that # process media - on single-processor systems set this # parameter to 1 (default), on MP systems to a higher # value media_processor_threads=1
config.voicemail=inline #CFGOPTION_SEMS_ANNOUNCEPATH announce_path=/opt/sems-vm/lib/sems/audio/ #ENDCFGOPTION
#CFGOPTION_SEMS_ANNOUNCEMENT default_announce=default_en.wav #ENDCFGOPTION
#CFGOPTION_SEMS_RECORDTIME max_record_time=30 #ENDCFGOPTION
#CFGOPTION_SEMS_TEMPLATEDIR email_template_path=/opt/sems-vm/etc/sems/ #ENDCFGOPTION config.voicemail=end
Food fight? http://answers.yahoo.com/dir/index;_ylc=X3oDMTFvbGNhMGE3BF9TAzM5NjU0NTEwOARfcwMzOTY1NDUxMDMEc2VjA21haWxfdGFnbGluZQRzbGsDbWFpbF90YWcx?link=ask&sid=396545367 Enjoy some healthy debate in the Yahoo! Answers Food & Drink Q&A. http://answers.yahoo.com/dir/index;_ylc=X3oDMTFvbGNhMGE3BF9TAzM5NjU0NTEwOARfcwMzOTY1NDUxMDMEc2VjA21haWxfdGFnbGluZQRzbGsDbWFpbF90YWcx?link=ask&sid=396545367
Here is the log file of SEMS if I run -D 3 -E:
Configuration: configuration file: /opt/sems-vm/etc/sems/sems.conf Ser's unix socket: /tmp/ser_sock our unix socket: /tmp/sems_sock reply unix socket: /tmp/sems_rsp_sock plug-in path: /opt/sems-vm/lib/sems/plug-in daemon mode: 0 local IP: 202.95.149.2
(4595) DEBUG: main (sems.cpp:398): Loading plug-ins (4595) DEBUG: AmPlugIn (AmPlugIn.cpp:74): adding built-in codecs... (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 0 inserted (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 6 inserted (4595) DEBUG: addPayload (AmPlugIn.cpp:408): payload 'telephone-event'inserted with id 96 (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/echo.so ... (4595) DEBUG: loadAppPlugIn (AmPlugIn.cpp:327): application 'echo' loaded. (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/gsm.so ... (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 3 inserted (4595) DEBUG: addPayload (AmPlugIn.cpp:404): payload 'GSM'inserted with id 3 (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/ilbc.so ... (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 4 inserted (4595) DEBUG: addPayload (AmPlugIn.cpp:408): payload 'iLBC'inserted with id 97 (4595) DEBUG: addFileFormat (AmPlugIn.cpp:443): file format iLBC inserted (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/session_timer.so ... (4595) DEBUG: loadSehPlugIn (AmPlugIn.cpp:349): session component 'session_timer' loaded. (4595) DEBUG: loadDiPlugIn (AmPlugIn.cpp:371): component 'user_timer' loaded. (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/stats.so ... (4595) DEBUG: loadAppPlugIn (AmPlugIn.cpp:327): application 'stats' loaded. (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/wav.so ... (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 1 inserted (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 2 inserted (4595) DEBUG: addPayload (AmPlugIn.cpp:404): payload 'PCMU'inserted with id 0 (4595) DEBUG: addPayload (AmPlugIn.cpp:404): payload 'PCMA'inserted with id 8 (4595) DEBUG: addFileFormat (AmPlugIn.cpp:443): file format Wav inserted (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/voicemail.so ... (4595) DEBUG: loadAppPlugIn (AmPlugIn.cpp:327): application 'voicemail' loaded. (4595) DEBUG: _start (AmThread.cpp:68): Thread 1076198592 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1076198592 is just created. (4595) DEBUG: onLoad (Echo.cpp:53): session_timer_f == 0x00000000080DE2D0 (4595) DEBUG: init (StatsUDPServer.cpp:114): udp_port = 5040 (4595) DEBUG: init (StatsUDPServer.cpp:156): socket bound at port 5040 (4595) DEBUG: _start (AmThread.cpp:68): Thread 1077247040 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1077247040 is just created. (4595) DEBUG: _start (AmThread.cpp:68): Thread 1078295488 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1078295488 is just created. (4595) DEBUG: loadEmailTemplates (AnswerMachine.cpp:105): loading /opt/sems-vm/etc/sems/default.template ... (4595) DEBUG: main (sems.cpp:402): Starting session container (4595) DEBUG: _start (AmThread.cpp:68): Thread 1079343936 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1079343936 is just created. (4595) DEBUG: main (sems.cpp:405): Starting media processor (4595) DEBUG: init (AmMediaProcessor.cpp:60): Starting 1 MediaProcessorThreads. (4595) DEBUG: _start (AmThread.cpp:68): Thread 1080392384 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1080392384 is just created. (4595) DEBUG: main (sems.cpp:408): Starting mailer (4595) DEBUG: _start (AmThread.cpp:68): Thread 1081440832 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1081440832 is just created. (4595) DEBUG: main (sems.cpp:411): Starting RTP receiver (4595) DEBUG: _start (AmThread.cpp:68): Thread 1082489280 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1082489280 is just created. (4595) DEBUG: init (AmCtrlInterface.cpp:231): AmUnixCtrlInterface::init @ /tmp/sems_sock (4595) DEBUG: init (AmCtrlInterface.cpp:231): AmUnixCtrlInterface::init @ /tmp/sems_rsp_sock
And my ser-sems-vm.cfg log file is below. That's it, there are no logs come out again after that although I make a call that forward to this config file.
0(5217) fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048 0(5217) fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16548 0(5217) fm_malloc_init(0x42133000, 33554432), start=0x42133000 0(5217) shm_mem_init: success 0(0) core dump limits set to 4294967295 0(0) DEBUG: init_mod: sl_module stateless - initializing 0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered 0(0) unixsock_register_cmd: New command (sl_stats) registered 0(0) DEBUG: MD5 calculated: a4f2f9b28981bb5c557a16017d19e367 0(0) DEBUG: init_mod: tm 0(0) TM - (size of cell=2776, sip_msg=760) initializing... 0(0) Call-ID initialization: '7bf779f7' 0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered 0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered 0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered 0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered 0(0) unixsock_register_cmd: New command (t_uac_dlg) registered 0(0) unixsock_register_cmd: New command (t_uac_cancel) registered 0(0) unixsock_register_cmd: New command (t_hash) registered 0(0) unixsock_register_cmd: New command (t_reply) registered 0(0) DEBUG: lock_initialize: lock initialization started 0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered 0(0) unixsock_register_cmd: New command (t_stats) registered 0(0) DEBUG: MD5 calculated: 87c3255fcf77e1a1fc31565af61bc2a9 0(0) DEBUG: MD5 calculated: a74cfb4c2068fb6f0cdd44802927d31c 0(0) DEBUG: init_mod: rr 0(0) rr - initializing 0(0) DEBUG: init_mod: maxfwd 0(0) Maxfwd module- initializing 0(0) DEBUG: init_mod: avpops 0(0) AVPops - initializing 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_send_reply 0(0) fixing /usr/local/lib/ser/modules/tm.so t_newtran 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_send_reply 0(0) fixing /usr/local/lib/ser/modules/tm.so t_relay 0(0) fixing /usr/local/lib/ser/modules/tm.so t_write_unix 0(0) fixing /usr/local/lib/ser/modules/tm.so t_reply 0(0) INFO: udp_init: SO_RCVBUF is initially 65535 0(0) DEBUG: udp_init: trying SO_RCVBUF: 131070 0(0) DEBUG: setting SO_RCVBUF; set=131070,verify=262140 0(0) DEBUG: udp_init: trying SO_RCVBUF: 262140 0(0) DEBUG: setting SO_RCVBUF; set=262140,verify=262142 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 0(0) DBG: open_fifo_server: no fifo will be opened 0(0) init_unixsock_socket: Initializing Unix domain socket server @ /tmp/ser_sock 0(0) unixsock_register_cmd: New command (print) registered 0(0) unixsock_register_cmd: New command (version) registered 0(0) unixsock_register_cmd: New command (uptime) registered 0(0) unixsock_register_cmd: New command (which) registered 0(0) unixsock_register_cmd: New command (ps) registered 0(0) unixsock_register_cmd: New command (pwd) registered 0(0) unixsock_register_cmd: New command (arg) registered 0(0) unixsock_register_cmd: New command (kill) registered 1(0) DEBUG: init_mod_child (-5): tm 1(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 1(0) DEBUG: init_mod_child (-5): avpops 1(5220) init_unixsock_server: Unix domain socket server successfully initialized @ /tmp/ser_sock 2(0) DEBUG: init_mod_child (1): tm 2(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 2(0) DEBUG: init_mod_child (1): avpops 3(0) DEBUG: init_mod_child (2): tm 3(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 3(0) DEBUG: init_mod_child (2): avpops 4(0) DEBUG: init_mod_child (3): tm 4(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 4(0) DEBUG: init_mod_child (3): avpops 5(0) DEBUG: init_mod_child (4): tm 5(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 5(0) DEBUG: init_mod_child (4): avpops 6(0) DEBUG: init_mod_child (-1): tm 6(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 6(0) DEBUG: init_mod_child (-1): avpops 7(0) DEBUG: init_mod_child (5): tm 7(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 7(0) DEBUG: init_mod_child (5): avpops 8(0) DEBUG: init_mod_child (6): tm 8(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 8(0) DEBUG: init_mod_child (6): avpops 9(0) DEBUG: init_mod_child (7): tm 9(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 9(0) DEBUG: init_mod_child (7): avpops 10(0) DEBUG: init_mod_child (8): tm 10(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 10(0) DEBUG: init_mod_child (8): avpops 11(0) DEBUG: init_mod_child (-4): tm 11(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 11(0) DEBUG: init_mod_child (-4): avpops 0(5219) DEBUG: init_mod_child (0): tm 0(5219) DEBUG: callid: '7bf779f7-5219@202.95.149.2' 0(5219) DEBUG: init_mod_child (0): avpops
hmm...I thought there must be something wrong with the ser-sems-vm.cfg but I don't know where. Out of idea. About eyebeam configuration, It makes the ser proxy log file comes out 4(4807) lookup(): 'voicemail' Not found in usrloc What is that matter? My aliases table at SER database contains: | 115 | pcr.ac.id | sip:voicemail@pcr.ac.id | NULL | 2007-03-05 13:54:38 | 1.00 | The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything | 42 | 20070305135544 | 0 | 0 | 128 | SIP Express Router FIFO | | 113 | pcr.ac.id | sip:mailbox.pcr.ac.id | NULL | 2007-03-05 13:52:12 | 1.00 | The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything | 42 | 20070305135339 | 0 | 0 | 128 | SIP Express Router FIFO |
Sorry If I too much explain this, but I want to make sure that I don't miss anything. Hope u understand Thank you very much
Regards, Meidiana
____________________________________________________________________________________ Sucker-punch spam with award-winning protection. Try the free Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/features_spam.html
looks like the INVITE never goes to sems. Please send you ser.cfg file. g-)
Meidiana Ten wrote:
Here is the log file of SEMS if I run -D 3 -E:
Configuration: configuration file: /opt/sems-vm/etc/sems/sems.conf Ser's unix socket: /tmp/ser_sock our unix socket: /tmp/sems_sock reply unix socket: /tmp/sems_rsp_sock plug-in path: /opt/sems-vm/lib/sems/plug-in daemon mode: 0 local IP: 202.95.149.2
(4595) DEBUG: main (sems.cpp:398): Loading plug-ins (4595) DEBUG: AmPlugIn (AmPlugIn.cpp:74): adding built-in codecs... (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 0 inserted (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 6 inserted (4595) DEBUG: addPayload (AmPlugIn.cpp:408): payload 'telephone-event'inserted with id 96 (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/echo.so ... (4595) DEBUG: loadAppPlugIn (AmPlugIn.cpp:327): application 'echo' loaded. (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/gsm.so ... (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 3 inserted (4595) DEBUG: addPayload (AmPlugIn.cpp:404): payload 'GSM'inserted with id 3 (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/ilbc.so ... (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 4 inserted (4595) DEBUG: addPayload (AmPlugIn.cpp:408): payload 'iLBC'inserted with id 97 (4595) DEBUG: addFileFormat (AmPlugIn.cpp:443): file format iLBC inserted (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/session_timer.so ... (4595) DEBUG: loadSehPlugIn (AmPlugIn.cpp:349): session component 'session_timer' loaded. (4595) DEBUG: loadDiPlugIn (AmPlugIn.cpp:371): component 'user_timer' loaded. (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/stats.so ... (4595) DEBUG: loadAppPlugIn (AmPlugIn.cpp:327): application 'stats' loaded. (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/wav.so ... (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 1 inserted (4595) DEBUG: addCodec (AmPlugIn.cpp:387): codec id 2 inserted (4595) DEBUG: addPayload (AmPlugIn.cpp:404): payload 'PCMU'inserted with id 0 (4595) DEBUG: addPayload (AmPlugIn.cpp:404): payload 'PCMA'inserted with id 8 (4595) DEBUG: addFileFormat (AmPlugIn.cpp:443): file format Wav inserted (4595) DEBUG: load (AmPlugIn.cpp:115): loading /opt/sems-vm/lib/sems/plug-in/voicemail.so ... (4595) DEBUG: loadAppPlugIn (AmPlugIn.cpp:327): application 'voicemail' loaded. (4595) DEBUG: _start (AmThread.cpp:68): Thread 1076198592 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1076198592 is just created. (4595) DEBUG: onLoad (Echo.cpp:53): session_timer_f == 0x00000000080DE2D0 (4595) DEBUG: init (StatsUDPServer.cpp:114): udp_port = 5040 (4595) DEBUG: init (StatsUDPServer.cpp:156): socket bound at port 5040 (4595) DEBUG: _start (AmThread.cpp:68): Thread 1077247040 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1077247040 is just created. (4595) DEBUG: _start (AmThread.cpp:68): Thread 1078295488 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1078295488 is just created. (4595) DEBUG: loadEmailTemplates (AnswerMachine.cpp:105): loading /opt/sems-vm/etc/sems/default.template ... (4595) DEBUG: main (sems.cpp:402): Starting session container (4595) DEBUG: _start (AmThread.cpp:68): Thread 1079343936 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1079343936 is just created. (4595) DEBUG: main (sems.cpp:405): Starting media processor (4595) DEBUG: init (AmMediaProcessor.cpp:60): Starting 1 MediaProcessorThreads. (4595) DEBUG: _start (AmThread.cpp:68): Thread 1080392384 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1080392384 is just created. (4595) DEBUG: main (sems.cpp:408): Starting mailer (4595) DEBUG: _start (AmThread.cpp:68): Thread 1081440832 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1081440832 is just created. (4595) DEBUG: main (sems.cpp:411): Starting RTP receiver (4595) DEBUG: _start (AmThread.cpp:68): Thread 1082489280 is starting. (4595) DEBUG: start (AmThread.cpp:135): Thread 1082489280 is just created. (4595) DEBUG: init (AmCtrlInterface.cpp:231): AmUnixCtrlInterface::init @ /tmp/sems_sock (4595) DEBUG: init (AmCtrlInterface.cpp:231): AmUnixCtrlInterface::init @ /tmp/sems_rsp_sock
And my ser-sems-vm.cfg log file is below. That's it, there are no logs come out again after that although I make a call that forward to this config file.
0(5217) fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048 0(5217) fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16548 0(5217) fm_malloc_init(0x42133000, 33554432), start=0x42133000 0(5217) shm_mem_init: success 0(0) core dump limits set to 4294967295 0(0) DEBUG: init_mod: sl_module stateless - initializing 0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered 0(0) unixsock_register_cmd: New command (sl_stats) registered 0(0) DEBUG: MD5 calculated: a4f2f9b28981bb5c557a16017d19e367 0(0) DEBUG: init_mod: tm 0(0) TM - (size of cell=2776, sip_msg=760) initializing... 0(0) Call-ID initialization: '7bf779f7' 0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered 0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered 0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered 0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered 0(0) unixsock_register_cmd: New command (t_uac_dlg) registered 0(0) unixsock_register_cmd: New command (t_uac_cancel) registered 0(0) unixsock_register_cmd: New command (t_hash) registered 0(0) unixsock_register_cmd: New command (t_reply) registered 0(0) DEBUG: lock_initialize: lock initialization started 0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered 0(0) unixsock_register_cmd: New command (t_stats) registered 0(0) DEBUG: MD5 calculated: 87c3255fcf77e1a1fc31565af61bc2a9 0(0) DEBUG: MD5 calculated: a74cfb4c2068fb6f0cdd44802927d31c 0(0) DEBUG: init_mod: rr 0(0) rr - initializing 0(0) DEBUG: init_mod: maxfwd 0(0) Maxfwd module- initializing 0(0) DEBUG: init_mod: avpops 0(0) AVPops - initializing 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_send_reply 0(0) fixing /usr/local/lib/ser/modules/tm.so t_newtran 0(0) fixing /usr/local/lib/ser/modules/sl.so sl_send_reply 0(0) fixing /usr/local/lib/ser/modules/tm.so t_relay 0(0) fixing /usr/local/lib/ser/modules/tm.so t_write_unix 0(0) fixing /usr/local/lib/ser/modules/tm.so t_reply 0(0) INFO: udp_init: SO_RCVBUF is initially 65535 0(0) DEBUG: udp_init: trying SO_RCVBUF: 131070 0(0) DEBUG: setting SO_RCVBUF; set=131070,verify=262140 0(0) DEBUG: udp_init: trying SO_RCVBUF: 262140 0(0) DEBUG: setting SO_RCVBUF; set=262140,verify=262142 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 0(0) DBG: open_fifo_server: no fifo will be opened 0(0) init_unixsock_socket: Initializing Unix domain socket server @ /tmp/ser_sock 0(0) unixsock_register_cmd: New command (print) registered 0(0) unixsock_register_cmd: New command (version) registered 0(0) unixsock_register_cmd: New command (uptime) registered 0(0) unixsock_register_cmd: New command (which) registered 0(0) unixsock_register_cmd: New command (ps) registered 0(0) unixsock_register_cmd: New command (pwd) registered 0(0) unixsock_register_cmd: New command (arg) registered 0(0) unixsock_register_cmd: New command (kill) registered 1(0) DEBUG: init_mod_child (-5): tm 1(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 1(0) DEBUG: init_mod_child (-5): avpops 1(5220) init_unixsock_server: Unix domain socket server successfully initialized @ /tmp/ser_sock 2(0) DEBUG: init_mod_child (1): tm 2(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 2(0) DEBUG: init_mod_child (1): avpops 3(0) DEBUG: init_mod_child (2): tm 3(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 3(0) DEBUG: init_mod_child (2): avpops 4(0) DEBUG: init_mod_child (3): tm 4(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 4(0) DEBUG: init_mod_child (3): avpops 5(0) DEBUG: init_mod_child (4): tm 5(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 5(0) DEBUG: init_mod_child (4): avpops 6(0) DEBUG: init_mod_child (-1): tm 6(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 6(0) DEBUG: init_mod_child (-1): avpops 7(0) DEBUG: init_mod_child (5): tm 7(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 7(0) DEBUG: init_mod_child (5): avpops 8(0) DEBUG: init_mod_child (6): tm 8(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 8(0) DEBUG: init_mod_child (6): avpops 9(0) DEBUG: init_mod_child (7): tm 9(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 9(0) DEBUG: init_mod_child (7): avpops 10(0) DEBUG: init_mod_child (8): tm 10(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 10(0) DEBUG: init_mod_child (8): avpops 11(0) DEBUG: init_mod_child (-4): tm 11(0) DEBUG: callid: '7bf779f7-0@202.95.149.2' 11(0) DEBUG: init_mod_child (-4): avpops 0(5219) DEBUG: init_mod_child (0): tm 0(5219) DEBUG: callid: '7bf779f7-5219@202.95.149.2' 0(5219) DEBUG: init_mod_child (0): avpops
hmm...I thought there must be something wrong with the ser-sems-vm.cfg but I don't know where. Out of idea. About eyebeam configuration, It makes the ser proxy log file comes out 4(4807) lookup(): 'voicemail' Not found in usrloc What is that matter? My aliases table at SER database contains: | 115 | pcr.ac.id | sip:voicemail@pcr.ac.id | NULL | 2007-03-05 13:54:38 | 1.00 | The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything | 42 | 20070305135544 | 0 | 0 | 128 | SIP Express Router FIFO | | 113 | pcr.ac.id | sip:mailbox.pcr.ac.id | NULL | 2007-03-05 13:52:12 | 1.00 | The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything | 42 | 20070305135339 | 0 | 0 | 128 | SIP Express Router FIFO |
Sorry If I too much explain this, but I want to make sure that I don't miss anything. Hope u understand Thank you very much
Regards, Meidiana
Sucker-punch spam with award-winning protection. Try the free Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/features_spam.html _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Andrey Kuprianov -
Greger V. Teigre -
Meidiana Ten -
Olle E Johansson -
Stefan Sayer