6 May
2011
6 May
'11
4:40 a.m.
Hello to all!
I need a little help with our ser installation (ser-2.0.0-rc1).
Due some network restrictions, we need to force every call to pass trought rtpproxy.
Could someone point me to the right place where to force it?
Please an example based on our config would be really helpful, but in two scenarios:
1. ALL CALLS trought rtpproxy
2. ONLY CALLS from a given network trought rtpproxy
We are in doubt on what choose between the two solutions. Having both examples could me
help to
implement the needs faster :)
Thank's a lot for your help!
Simon
9 May
9 May
4:09 a.m.
No help at all?
It would be a good start point a doc to read concern this aspect.
Of course, an example based on the conf could me help a lot better.
Thank's to all!
Simon
Il 06/05/2011 10:40, Simone Felici ha scritto:
Hello to all!
I need a little help with our ser installation (ser-2.0.0-rc1).
Due some network restrictions, we need to force every call to pass trought rtpproxy.
Could someone point me to the right place where to force it?
Please an example based on our config would be really helpful, but in two scenarios:
1. ALL CALLS trought rtpproxy
2. ONLY CALLS from a given network trought rtpproxy
We are in doubt on what choose between the two solutions. Having both examples could me
help to
implement the needs faster :)
Thank's a lot for your help!
Simon
4:28 a.m.
Hi,
did you look at the manuals?
You must simply issue a rtpproxy_offer/_answer to engage the RTPProxy
from your route/reply_route, as described in the manual:
http://www.kamailio.org/docs/modules/devel/modules/rtpproxy.html#id3056341
Carsten
2011/5/9 Simone Felici <s.felici(a)mclink.eu>eu>:
No help at all?
It would be a good start point a doc to read concern this aspect.
Of course, an example based on the conf could me help a lot better.
Thank's to all!
Simon
Il 06/05/2011 10:40, Simone Felici ha scritto:
--
Carsten Bock
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Schomburgstr. 80
22767 Hamburg
Germany
Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220
Hello to all!
I need a little help with our ser installation (ser-2.0.0-rc1).
Due some network restrictions, we need to force every call to pass trought
rtpproxy.
Could someone point me to the right place where to force it?
Please an example based on our config would be really helpful, but in two
scenarios:
1. ALL CALLS trought rtpproxy
2. ONLY CALLS from a given network trought rtpproxy
We are in doubt on what choose between the two solutions. Having both
examples could me help to
implement the needs faster :)
Thank's a lot for your help!
Simon
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5:44 a.m.
Hello,
I'll start from here and set-up a scenario to test it out.
Is it compatible with ser-2.0.0-rc1 used by me?
Thank's for the answer.
Simon
Il 09/05/2011 10:28, Carsten Bock ha scritto:
Hi,
did you look at the manuals?
You must simply issue a rtpproxy_offer/_answer to engage the RTPProxy
from your route/reply_route, as described in the manual:
http://www.kamailio.org/docs/modules/devel/modules/rtpproxy.html#id3056341
Carsten
2011/5/9 Simone Felici<s.felici(a)mclink.eu>eu>:
--
Simone Felici
Divisione Tecnica: Progettazione e Sviluppo
tel. +39 0461.030.111
fax. +39 0461 030.112
Via Fersina, 23 - 38123 Trento
-------------
MC-link S.p.A.
Sede Direzionale e Amministrativa
Via Carlo Perrier, 9/a - 00157 Roma
Sede Legale
Via Fersina, 23 - 38123 Trento
http://www.mclink.it
Save a tree. Don't print this e-mail unless it's really necessary
Informativa ai sensi del Codice della proprietà industriale e del Codice dei dati
personali.
Le informazioni contenute in questa e-mail e negli eventuali allegati, possono contenere
informazioni confidenziali e coperte da segreto commerciale/industriale. Esse vengono
comunicate nei
limiti giuridici dei rapporti in essere fra le parti e pertanto nessun ulteriore diritto
di
proprietà intellettuale o industriale può essere rivendicato dal ricevente.
Le informazioni contenute in questa e-mail e negli eventuali allegati sono indirizzate
esclusivamente a coloro che figurano come destinatari.
Se avete ricevuto per errore questa e-mail siete pregati di informarci (rispedendola al
mittente) e
di provvedere alla sua rimozione, a non farne utilizzo e a non conservarne alcuna copia.
No help at all?
It would be a good start point a doc to read concern this aspect.
Of course, an example based on the conf could me help a lot better.
Thank's to all!
Simon
Il 06/05/2011 10:40, Simone Felici ha scritto:
Hello to all!
I need a little help with our ser installation (ser-2.0.0-rc1).
Due some network restrictions, we need to force every call to pass trought
rtpproxy.
Could someone point me to the right place where to force it?
Please an example based on our config would be really helpful, but in two
scenarios:
1. ALL CALLS trought rtpproxy
2. ONLY CALLS from a given network trought rtpproxy
We are in doubt on what choose between the two solutions. Having both
examples could me help to
implement the needs faster :)
Thank's a lot for your help!
Simon
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5:48 a.m.
Hi Simone,
it should be similar for SER 2.0.
The commands may be different though, so you probably do one of the following:
- upgrade to a more recent SER version
- check the readme for your version (should be in modules/nathelper directory)
Carsten
2011/5/9 Simone Felici <s.felici(a)mclink.eu>eu>:
Hello,
I'll start from here and set-up a scenario to test it out.
Is it compatible with ser-2.0.0-rc1 used by me?
Thank's for the answer.
Simon
Il 09/05/2011 10:28, Carsten Bock ha scritto:
--
Carsten Bock
http://www.ng-voice.com
mailto:carsten@ng-voice.com
Schomburgstr. 80
22767 Hamburg
Germany
Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220
Hi,
did you look at the manuals?
You must simply issue a rtpproxy_offer/_answer to engage the RTPProxy
from your route/reply_route, as described in the manual:
http://www.kamailio.org/docs/modules/devel/modules/rtpproxy.html#id3056341
Carsten
2011/5/9 Simone Felici<s.felici(a)mclink.eu>eu>:
--
Simone Felici
Divisione Tecnica: Progettazione e Sviluppo
tel. +39 0461.030.111
fax. +39 0461 030.112
Via Fersina, 23 - 38123 Trento
-------------
MC-link S.p.A.
Sede Direzionale e Amministrativa
Via Carlo Perrier, 9/a - 00157 Roma
Sede Legale
Via Fersina, 23 - 38123 Trento
http://www.mclink.it
Save a tree. Don't print this e-mail unless it's really necessary
Informativa ai sensi del Codice della proprietà industriale e del Codice dei
dati personali.
Le informazioni contenute in questa e-mail e negli eventuali allegati,
possono contenere informazioni confidenziali e coperte da segreto
commerciale/industriale. Esse vengono comunicate nei limiti giuridici dei
rapporti in essere fra le parti e pertanto nessun ulteriore diritto di
proprietà intellettuale o industriale può essere rivendicato dal ricevente.
Le informazioni contenute in questa e-mail e negli eventuali allegati sono
indirizzate esclusivamente a coloro che figurano come destinatari.
Se avete ricevuto per errore questa e-mail siete pregati di informarci
(rispedendola al mittente) e di provvedere alla sua rimozione, a non farne
utilizzo e a non conservarne alcuna copia.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
No help at all?
It would be a good start point a doc to read concern this aspect.
Of course, an example based on the conf could me help a lot better.
Thank's to all!
Simon
Il 06/05/2011 10:40, Simone Felici ha scritto:
Hello to all!
I need a little help with our ser installation (ser-2.0.0-rc1).
Due some network restrictions, we need to force every call to pass
trought
rtpproxy.
Could someone point me to the right place where to force it?
Please an example based on our config would be really helpful, but in
two
scenarios:
1. ALL CALLS trought rtpproxy
2. ONLY CALLS from a given network trought rtpproxy
We are in doubt on what choose between the two solutions. Having both
examples could me help to
implement the needs faster :)
Thank's a lot for your help!
Simon
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
6:08 a.m.
Hi Carsten,
The upgrade is something I would like to do very! But at the moment there are so many
customizations
on the structure. Could be maintained, but the work sould be almost long. I search to
understand if
at least this command is implemented and then look forward.
Meanwhile many thank's
Simon
Il 09/05/2011 11:48, Carsten Bock ha scritto:
Hi Simone,
it should be similar for SER 2.0.
The commands may be different though, so you probably do one of the following:
- upgrade to a more recent SER version
- check the readme for your version (should be in modules/nathelper directory)
Carsten
4982
days inactive
4985
days old
5 comments
2 participants
participants (2)
-
Carsten Bock -
Simone Felici