2 Apr
2010
2 Apr
'10
6:18 a.m.
Yes,
i had installed self signed certificates via IE.
Bria shows it and validates them during registration process, its the call
initiation where it creates problem.
Kamailio starts without fix_nated_register.
With this function it gives configuration file error.
and i had load nathelper.so and that is been confirmed via logs
--
Regards,
Hemanshu Patel
SIS,Ahmedabad.
M: 09601295238
Just checking...
Some time ago, I made some tests with Bria and self signed certs... It
was a little
tricky to find that I had to install the cert through IE.
Did you install them this way? Can you check Bria's log to ensure that
the cert is accepted?
Edson.
Henning Westerholt escreveu:
> On Thursday 01 April 2010, Hemanshu Patel wrote:
>> yes i did, and log shows that nathelper.so load without any problem.
kamailio loads and work perfectly with grandstream devices with TLS
and
>> SRTp. it gives problem with Bria softphones
only.
>> I am using self signed certificates which works perfectly with
grandstream,
can there be any chances that due to self sign ness of
the
>> certificates, it doesnt work well with bria
devices.
> Hi Hemanshu,
> ok, so the error you reported in your previous message is solved. It
could be
> possible that the Bria softphone implement a more
strict policy with
regards
> to the check of the certificates. But you should
be able to find
something in
> the UA documentation about this, you could ask the
vendor or other
users. As
the last
resort just test with certificates that are not self signed. ;-)
Cheers,
Henning
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
2 Apr
2 Apr
9:38 a.m.
New subject: [Kamailio-Users] Odd Behaviour with Kamailio + TLS
I think we can't find a solution with detailed information.
Did you made any changes to the code?
Add fix_nated_register() again to your config, set debug=4 and start
kamailio.
Then send us the complete logfile (from kamailio startup until the
shutdown due to the error message). Further send us your complete
kamailio.cfg configuration.
Replace sensitive data (passwords, IP-addresses, domains ...) if needed.
If you do not want to have it public, send it directly to me.
regards
klaus
Am 02.04.2010 06:18, schrieb Hemanshu Patel:
Yes,
i had installed self signed certificates via IE.
Bria shows it and validates them during registration process, its the call
initiation where it creates problem.
Kamailio starts without fix_nated_register.
With this function it gives configuration file error.
and i had load nathelper.so and that is been confirmed via logs
10:27 a.m.
New subject: [Kamailio-Users] Odd Behaviour with Kamailio + TLS
Nope, i didnt made any changes to the code.
Please find the attached configuration file and error log with
fix_nated_register.
--
Regards,
Hemanshu Patel
SIS,Ahmedabad.
M: 09601295238
I think we can't find a solution with detailed
information.
Did you made any changes to the code?
Add fix_nated_register() again to your config, set debug=4 and start
kamailio.
Then send us the complete logfile (from kamailio startup until the
shutdown due to the error message). Further send us your complete
kamailio.cfg configuration.
Replace sensitive data (passwords, IP-addresses, domains ...) if needed.
If you do not want to have it public, send it directly to me.
regards
klaus
Am 02.04.2010 06:18, schrieb Hemanshu Patel:
Yes,
i had installed self signed certificates via IE.
Bria shows it and validates them during registration process, its the
call
initiation where it creates problem.
Kamailio starts without fix_nated_register.
With this function it gives configuration file error.
and i had load nathelper.so and that is been confirmed via logs
5146
days inactive
5146
days old
2 comments
2 participants
participants (2)
-
Hemanshu Patel -
Klaus Darilion