hi,

i still got the same error

bash-2.05# serctl add 1001 1001 chris@yahoo.com awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed bash-2.05#

pls. advise on how to fix this.

thnks. ----- Original Message ----- From: Kofi Obiri-Yeboah To: chris ; serusers@lists.iptel.org Sent: Tuesday, July 26, 2005 8:06 PM Subject: RE: [Serusers] serctll add error

syntax is <username> <password> <email address> you have a typo in the email address use "@" instead of "2" use shift-2 before yahoo.com

HTH -----Original Message----- From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of chris Sent: Tuesday, July 26, 2005 12:58 AM To: serusers@lists.iptel.org Subject: [Serusers] serctll add error

hello

i tried running serctl add 1001 1001 chris_cleofe2yahoo.com

but i got this error:

awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed

pls advise.

thnks.

hi kofi,

attached is my ser.cfg i got this sample script from onsip.org getting started doc. this is their auth-mysql.3.05.cfg sample script, i just change the IP address on the listen variable. running using this cfg file leads me to an error.

ERROR: bad config file (1 errors)

maybe u can help me fix this. i have no idea how i can give you more details on the error cause that is the only line the system gives me.

thnks.

debug=3 fork=yes log_stderror=no

listen=203.115.128.41 # put your server IP address here port=5060 children=4

dns=no rev_dns=no

fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser"

loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so"

modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1)

route {

# ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; };

if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; };

# ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); };

# ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { route(1); break; };

# ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); break; };

if (uri==myself) { if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; };

lookup("aliases"); if (uri!=myself) { route(1); break; };

if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; };

route(1); }; }

route[1] {

# ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- if (!t_relay()) { sl_reply_error(); }; }

route[2] {

# ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying");

if (!www_authorize("","subscriber")) { www_challenge("","0"); break; };

if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; };

consume_credentials();

if (!save("location")) { sl_reply_error(); }; }

route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; };

consume_credentials();

lookup("aliases"); if (uri!=myself) { route(1); break; };

if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; };

route(1); }

----- Original Message ----- From: Kofi Obiri-Yeboah To: chris ; serusers@lists.iptel.org Sent: Tuesday, July 26, 2005 11:39 PM Subject: RE: [Serusers] serctll add error

please send your config file -----Original Message----- From: chris [mailto:chris@fivestartel.com] Sent: Tuesday, July 26, 2005 6:34 AM To: Kofi Obiri-Yeboah; serusers@lists.iptel.org Subject: Re: [Serusers] serctll add error

hi,

i still got the same error

bash-2.05# serctl add 1001 1001 chris@yahoo.com awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed bash-2.05#

pls. advise on how to fix this.

thnks. ----- Original Message ----- From: Kofi Obiri-Yeboah To: chris ; serusers@lists.iptel.org Sent: Tuesday, July 26, 2005 8:06 PM Subject: RE: [Serusers] serctll add error

syntax is <username> <password> <email address> you have a typo in the email address use "@" instead of "2" use shift-2 before yahoo.com

HTH -----Original Message----- From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of chris Sent: Tuesday, July 26, 2005 12:58 AM To: serusers@lists.iptel.org Subject: [Serusers] serctll add error

hello

i tried running serctl add 1001 1001 chris_cleofe2yahoo.com

but i got this error:

awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed

pls advise.

thnks.

hi kofi,

i did commented out the listen=IP line. but i gives me the same error.

ERROR: bad config file (1 errors)

by the way, when i tried the hello_world.cfg from onsip i did not encountered any problem and ser was able to run.

thnks kofi, i will wait for you reply next week.

chris. ----- Original Message ----- From: Kofi Obiri-Yeboah To: chris ; serusers@lists.iptel.org Sent: Wednesday, July 27, 2005 11:19 AM Subject: RE: [Serusers] serctll add error

Chris,

I will run your config file over the weekend and will get back to you.

Clearly that fact that you are receiving a bad config file error is an indication that there is a problem. Could you please comment out the listen=IP address line and rerun ??????

KOFI -----Original Message----- From: chris [mailto:chris@fivestartel.com] Sent: Tuesday, July 26, 2005 10:19 AM To: Kofi Obiri-Yeboah; serusers@lists.iptel.org Subject: Re: [Serusers] serctll add error

hi kofi,

attached is my ser.cfg i got this sample script from onsip.org getting started doc. this is their auth-mysql.3.05.cfg sample script, i just change the IP address on the listen variable. running using this cfg file leads me to an error.

ERROR: bad config file (1 errors)

maybe u can help me fix this. i have no idea how i can give you more details on the error cause that is the only line the system gives me.

thnks.

debug=3 fork=yes log_stderror=no

listen=203.115.128.41 # put your server IP address here port=5060 children=4

dns=no rev_dns=no

fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser"

loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so"

modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1)

route {

# ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; };

if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; };

# ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); };

# ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { route(1); break; };

# ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); break; };

if (uri==myself) { if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; };

lookup("aliases"); if (uri!=myself) { route(1); break; };

if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; };

route(1); }; }

route[1] {

# ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- if (!t_relay()) { sl_reply_error(); }; }

route[2] {

# ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying");

if (!www_authorize("","subscriber")) { www_challenge("","0"); break; };

if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; };

consume_credentials();

if (!save("location")) { sl_reply_error(); }; }

route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; };

consume_credentials();

lookup("aliases"); if (uri!=myself) { route(1); break; };

if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; };

route(1); }

----- Original Message ----- From: Kofi Obiri-Yeboah To: chris ; serusers@lists.iptel.org Sent: Tuesday, July 26, 2005 11:39 PM Subject: RE: [Serusers] serctll add error

please send your config file -----Original Message----- From: chris [mailto:chris@fivestartel.com] Sent: Tuesday, July 26, 2005 6:34 AM To: Kofi Obiri-Yeboah; serusers@lists.iptel.org Subject: Re: [Serusers] serctll add error

hi,

i still got the same error

bash-2.05# serctl add 1001 1001 chris@yahoo.com awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed bash-2.05#

pls. advise on how to fix this.

thnks. ----- Original Message ----- From: Kofi Obiri-Yeboah To: chris ; serusers@lists.iptel.org Sent: Tuesday, July 26, 2005 8:06 PM Subject: RE: [Serusers] serctll add error

syntax is <username> <password> <email address> you have a typo in the email address use "@" instead of "2" use shift-2 before yahoo.com

HTH -----Original Message----- From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of chris Sent: Tuesday, July 26, 2005 12:58 AM To: serusers@lists.iptel.org Subject: [Serusers] serctll add error

hello

i tried running serctl add 1001 1001 chris_cleofe2yahoo.com

but i got this error:

awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed

pls advise.

thnks.

Did you try ser -c -f <config file> ? This should tell you where the problem is.

Kofi Obiri-Yeboah wrote:

Chris,

I will run your config file over the weekend and will get back to you.

Clearly that fact that you are receiving a bad config file error is an indication that there is a problem. Could you please comment out the listen=IP address line and rerun ??????

KOFI

-----Original Message-----
*From:* chris [mailto:chris@fivestartel.com]
*Sent:* Tuesday, July 26, 2005 10:19 AM
*To:* Kofi Obiri-Yeboah; serusers@lists.iptel.org
*Subject:* Re: [Serusers] serctll add error

hi kofi,

attached is my ser.cfg i got this sample script from onsip.org
getting started doc. this is their auth-mysql.3.05.cfg sample
script, i just change the IP address on the listen variable.
running using this cfg file leads me to an error.

ERROR: bad config file (1 errors)

maybe u can help me fix this. i have no idea how i can give you
more details on the error cause that is the only line the system
gives me.

thnks.


debug=3
fork=yes
log_stderror=no

listen=203.115.128.41           # put your server IP address here
port=5060
children=4

dns=no
rev_dns=no

fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser"

loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"

modparam("auth_db|uri_db|usrloc", "db_url",
"mysql://ser:heslo@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("usrloc", "db_mode", 2)
modparam("rr", "enable_full_lr", 1)

route {

 # -----------------------------------------------------------------
 # Sanity Check Section
 # -----------------------------------------------------------------
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483", "Too Many Hops");
  break;
 };

 if (msg:len > max_len) {
  sl_send_reply("513", "Message Overflow");
  break;
 };

 # -----------------------------------------------------------------
 # Record Route Section
 # -----------------------------------------------------------------
 if (method!="REGISTER") {
  record_route();
 };

 # -----------------------------------------------------------------
 # Loose Route Section
 # -----------------------------------------------------------------
 if (loose_route()) {
  route(1);
  break;
 };

 # -----------------------------------------------------------------
 # Call Type Processing Section
 # -----------------------------------------------------------------
 if (uri!=myself) {
  route(1);
  break;
 };

 if (uri==myself) {
  if (method=="INVITE") {
   route(3);
   break;
  } else  if (method=="REGISTER") {
   route(2);
   break;
  };

  lookup("aliases");
  if (uri!=myself) {
   route(1);
   break;
  };

  if (!lookup("location")) {
   sl_send_reply("404", "User Not Found");
   break;
  };

  route(1);
 };
}

route[1] {

 # -----------------------------------------------------------------
 # Default Message Handler
 # -----------------------------------------------------------------
 if (!t_relay()) {
  sl_reply_error();
 };
}

route[2] {

 # -----------------------------------------------------------------
 # REGISTER Message Handler
 # ----------------------------------------------------------------
 sl_send_reply("100", "Trying");


 if (!www_authorize("","subscriber")) {
  www_challenge("","0");
  break;
 };

 if (!check_to()) {
  sl_send_reply("401", "Unauthorized");
  break;
 };

 consume_credentials();

 if (!save("location")) {
  sl_reply_error();
 };
}

route[3] {
 # -----------------------------------------------------------------
 # INVITE Message Handler
 # -----------------------------------------------------------------
 if (!proxy_authorize("","subscriber")) {
  proxy_challenge("","0");
  break;
 } else if (!check_from()) {
  sl_send_reply("403", "Use From=ID");
  break;
 };

  consume_credentials();

 lookup("aliases");
 if (uri!=myself) {
  route(1);
  break;
 };

 if (!lookup("location")) {
  sl_send_reply("404", "User Not Found");
  break;
 };

 route(1);
}



    ----- Original Message -----
    *From:* Kofi Obiri-Yeboah <mailto:kofi@radiocomplex.com>
    *To:* chris <mailto:chris@fivestartel.com> ;
    serusers@lists.iptel.org <mailto:serusers@lists.iptel.org>
    *Sent:* Tuesday, July 26, 2005 11:39 PM
    *Subject:* RE: [Serusers] serctll add error

    please send your config file

        -----Original Message-----
        *From:* chris [mailto:chris@fivestartel.com]
        *Sent:* Tuesday, July 26, 2005 6:34 AM
        *To:* Kofi Obiri-Yeboah; serusers@lists.iptel.org
        <mailto:serusers@lists.iptel.org>
        *Subject:* Re: [Serusers] serctll add error

        hi,

        i still got the same error

        bash-2.05# serctl add 1001 1001 chris@yahoo.com
        <mailto:chris@yahoo.com>
        awk: syntax error near line 1
        awk: bailing out near line 1
        awk: syntax error near line 1
        awk: bailing out near line 1
        HA1 calculation failed
        bash-2.05#
        pls. advise on how to fix this.

        thnks.

            ----- Original Message -----
            *From:* Kofi Obiri-Yeboah <mailto:kofi@radiocomplex.com>
            *To:* chris <mailto:chris@fivestartel.com> ;
            serusers@lists.iptel.org <mailto:serusers@lists.iptel.org>
            *Sent:* Tuesday, July 26, 2005 8:06 PM
            *Subject:* RE: [Serusers] serctll add error

            syntax is <username> <password> <email address>
            you have a typo in the email address use "@"  instead
            of "2" 
            use shift-2 before yahoo.com

            HTH

                -----Original Message-----
                *From:* serusers-bounces@lists.iptel.org
                <mailto:serusers-bounces@lists.iptel.org>
                [mailto:serusers-bounces@lists.iptel.org]*On Behalf Of
                *chris
                *Sent:* Tuesday, July 26, 2005 12:58 AM
                *To:* serusers@lists.iptel.org <mailto:serusers@lists.iptel.org>
                *Subject:* [Serusers] serctll add error

                hello

                i tried running serctl add 1001 1001
                chris_cleofe2yahoo.com

                but i got this error:

                awk: syntax error near line 1
                awk: bailing out near line 1
                awk: syntax error near line 1
                awk: bailing out near line 1
                HA1 calculation failed

                pls advise.


                thnks.

---

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

hi,

any fixes and advise on the error i encountered?

bash-2.05# serctl add 1001 1001 chris@yahoo.com awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed bash-2.05#

thnks. ----- Original Message ----- From: chris To: Kofi Obiri-Yeboah ; serusers@lists.iptel.org Sent: Tuesday, July 26, 2005 9:33 PM Subject: Re: [Serusers] serctll add error

hi,

i still got the same error

bash-2.05# serctl add 1001 1001 chris@yahoo.com awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed bash-2.05#

pls. advise on how to fix this.

thnks. ----- Original Message ----- From: Kofi Obiri-Yeboah To: chris ; serusers@lists.iptel.org Sent: Tuesday, July 26, 2005 8:06 PM Subject: RE: [Serusers] serctll add error

syntax is <username> <password> <email address> you have a typo in the email address use "@" instead of "2" use shift-2 before yahoo.com

HTH -----Original Message----- From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of chris Sent: Tuesday, July 26, 2005 12:58 AM To: serusers@lists.iptel.org Subject: [Serusers] serctll add error

hello

i tried running serctl add 1001 1001 chris_cleofe2yahoo.com

but i got this error:

awk: syntax error near line 1 awk: bailing out near line 1 awk: syntax error near line 1 awk: bailing out near line 1 HA1 calculation failed

pls advise.

thnks.

------------------------------------------------------------------------------

_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers