From: Martin Pohan?en?k &lt;pohancenik.martin(a)gmail.com&gt; >Subject: Re: [SR-Users] ? about presence >To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - > Users Mailing List" &lt;sr-users(a)lists.sip-router.org&gt; >Message-ID: &lt;BANLkTi=5S3OHe2SEDDe8ry+X+2ZUd2LqRg(a)mail.gmail.com&gt; >Content-Type: text/plain; charset="gb2312" > >What SIP client app are you using to test presence ? >Please try to post the client configuration, too. > >Also try to go through the entire config file from the guide and compare >what is different from your config file. That might give you a clue of what >is wrong > >2011/5/3 Bucur Marius &lt;bucur_marius_ovidiu(a)yahoo.com&gt; > >> Hello, >> >> If you disable "#!define WITH_PRECENCE" you will not use presence at all - >> so it is most probably that you don't want that. >> When you use db_fallback mode, the subscribers are only written to database >> once in a while (in your case every 20 seconds). >> Also, if the subscribers are not authorized, they will only be in the >> "watchers" table - not active_watchers. >> Can you check if there is something in the "watchers" table? >> Also, can you check your system and see if it works without the xcap >> server? >> >> modparam("presence_xml", "force_active", 1) >> #modparam("presence_xml", "integrated_xcap_server", 1) >> >> Cheers, >> Marius >> >> ------------------------------ >> *From:* hb &lt;hhb.1988(a)163.com&gt; >> *To:* sr-users(a)lists.sip-router.org >> *Sent:* Tue, May 3, 2011 11:44:16 AM >> *Subject:* [SR-Users] ? about presence >> >> Dear everyone: >> I use kamalio 3.1. >> I want to add the xcap_sever and presence modules into my >> kamailio. I followed the lists " >> http://cache.baidu.com/c?m=9d78d513d99a12f00bb6ca255001d7175b14d7226b8b8142… >> step by step. The only difference is that i use the database postgresql. >> When i start the server, it worked well, but the softphone was not >> able to show the presence of the contacts. >> I tried many times and found that when i disable the sentence >> "#!define WITH_PRECENCE" in "kamailio.cfg", it can show the state of the >> contacts. However, when i check the database, there was nothing in "Active >> Watchers" and "Presentity" tables. >> I think there must have something wrong with the configure of >> presence. Any response will be appreciated. >> >> >> >> ps: the configuration of the presence in kamailio.cfg as follows(same as >> the Tutorial): >> >> #!ifdef WITH_PRESENCE >> loadmodule "presence.so" >> loadmodule "presence_xml.so" >> #!endif >> >> #!ifdef WITH_PRESENCE >> # ----- presence params ----- >> modparam("presence", "db_url", DBURL) >> modparam("presence", "fallback2db", 1) >> modparam("presence", "db_update_period", 20) >> >> # ----- presence_xml params ----- >> modparam("presence_xml", "db_url", DBURL) >> modparam("presence_xml", "force_active", 0) >> modparam("presence_xml", "integrated_xcap_server", 1) >> #!endif >> haibo huang >> >> >> >> ------------------------------ >> ??????2G????????????????????3?!<http://mail.163.com/html/110414_attachment/att1.htm> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20110503/8d425fbc/attachment-0001.htm> > >------------------------------ > >Message: 2 >Date: Tue, 3 May 2011 12:55:57 +0900 >From: Sungjin Park &lt;parksj84(a)gmail.com&gt; >Subject: [SR-Users] Rtp Port Question >To: serusers(a)iptel.org >Message-ID: &lt;BANLkTimJwR5e_yM5SA67QjYzOj8s=tgAjQ(a)mail.gmail.com&gt; >Content-Type: text/plain; charset="iso-8859-1" > >Hello, I use your sip service well. >But there is one problem occured. > >I use your sip service on my android system. >The application is Csipsimple. > >On Wifi and 3G connection, your service is very good. your sip account did >good work. even 3G network connection. >Btw, On Mobile Wimax service, the signal was good. But the Voice could not >be trasnsferred. > > >I guess the problem is about rtp port. >*I'd like to know the rtp port that IPTEL use*. I will request Korea Telecom >about rtp port open. >Korea Telecom is Korean mobile Wimax Provider. > >Thank you. > >Sungjin Park >Seoul, Korea >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20110503/34b87280/attachment-0001.htm> > >------------------------------ > >Message: 3 >Date: Tue, 3 May 2011 12:21:22 -0300 (ART) >From: Claudio Furrer &lt;elcaio(a)gmail.com&gt; >Subject: [SR-Users] INSTALL file >To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - > Users Mailing List" &lt;sr-users(a)lists.sip-router.org&gt; >Message-ID: &lt;alpine.LNX.2.00.1105031219240.29861(a)askepios.local&gt; >Content-Type: TEXT/PLAIN; charset=US-ASCII > >Hello, > >Is this still applicable? > >See INSTALL file (line 669) > >3.1) create MySQL tables for SER flavour > - if you have a previously installed SER on your system, use > /usr/sbin/ser_mysql.sh reinstall > to convert your SER database into new structures > - otherwise, if this is your very first installation, use > /usr/sbin/ser_mysql.sh create > to create SER database structures > (you will be prompted for password of MySql "root" user) > >Because I did not found the *reinstall* option on sources.. > >Thanks, >Claudio > > > >------------------------------ > >Message: 4 >Date: Tue, 3 May 2011 12:49:22 -0300 (ART) >From: Claudio Furrer &lt;elcaio(a)gmail.com&gt; >Subject: [SR-Users] INSTALL file >To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - > Users Mailing List" &lt;sr-users(a)lists.sip-router.org&gt; >Message-ID: &lt;alpine.LNX.2.00.1105031223590.29861(a)askepios.local&gt; >Content-Type: TEXT/PLAIN; charset=US-ASCII > >Hello, > >Is this still applicable? > >See INSTALL file (line 669) > >3.1) create MySQL tables for SER flavour > - if you have a previously installed SER on your system, use > /usr/sbin/ser_mysql.sh reinstall > to convert your SER database into new structures > - otherwise, if this is your very first installation, use > /usr/sbin/ser_mysql.sh create > to create SER database structures > (you will be prompted for password of MySql "root" user) > >Because I did not found the *reinstall* option on sources.. > >Thanks, >Claudio > > > >------------------------------ > >Message: 5 >Date: Wed, 4 May 2011 17:18:17 +0800 (CST) >From: hb &lt;hhb.1988(a)163.com&gt; >Subject: [SR-Users] RE?RE? ? about presence >To: bucur_marius_ovidiu(a)yahoo.com >Cc: sr-users(a)lists.sip-router.org >Message-ID: &lt;694e6d8c.1c32b.12fba4cfaed.Coremail.hhb.1988(a)163.com&gt; >Content-Type: text/plain; charset="gbk" > >Dear?Bucur Marius? > Thank you for your help. > As you said the presence module does not work if I disable it's module. This time I used wireshark to get the packages. I found when I disable the presence module, one point send the "Notify" packages directly to the other, and there were no changes in the watchers table. And when I enable the module, I found it can create some lists in watchers. But at this time , I found there is nothing contents in packages like "Subscribe" and "Notify".What's more when one point change the state, it dose not send any packages to the server. > You said active_watchers will have something when the subscribe is authorised. What dose it mean? My server have not authorised the subscribe? But it can have a call with other subscribe. > Look foreword your help. > haibo huang >-------------- next part -------------- >An HTML attachment was scrubbed... >URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20110504/3f6d4fb8/attachment.htm> > >------------------------------ > >_______________________________________________ >sr-users mailing list &gt;sr-users(a)lists.sip-router.org >http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > >End of sr-users Digest, Vol 72, Issue 5 >***************************************