21 Feb
2013
21 Feb
'13
12:36 p.m.
Dear All,
I am trying to use Kamailio 3.1.x server (called LB here) as the Load
Balancer for two other Kamailio server (called server01 and server02 here) .
Client A -----> Kamailio LB -----> Kamailio server01
Client B -----> Kamailio LB -----> Kamailio server01
If I dont use LB here , and letting Client A and B connect to Kamailio
server01 directly , all the communication is fine.
While using Kamailio LB ,without luck, although the sip client A and B
get 200 from server01 for Register,
they cannot reach each other for "Message" and "Invite".
It will be great appreciated if anyone can give a hint.
my config for Kamailio LB is as below :
==========================================
....
debug=2 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
children=2
check_via=no # (cmd. line: -v)
dns=off # (cmd. line: -r)
rev_dns=off # (cmd. line: -R)
port=5060
# for more info: sip_router -h
# ------------------ module loading ----------------------------------
mpath="/usr/local/lib64/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "dispatcher.so"
loadmodule "db_mysql.so"
# ----------------- setting module-specific parameters ---------------
# -- dispatcher params --
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
modparam("dispatcher",
"db_url","mysql://.........@........")
modparam("usrloc", "db_mode", 0)
modparam("rr", "enable_full_lr", 1)
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
# if (!method=="REGISTER")
# record_route();
ds_select_dst("1","4");
forward();
exit;
}
..
==========================================
best regards,
chanea
21 Feb
21 Feb
4:35 p.m.
New subject: [sr-dev] SOS!! Kamailio 3.1.x Load Balancer doesn't work
Are the clients behind NAT? If yes, you have to use proper NAT traversal
on the LB. Further, for outgoing INVITEs you have to route the requests
through the LB, either by static forwarding to the LB or using the Path
extension.
regards
Klaus
On 21.02.2013 12:36, chanea wrote:
Dear All,
I am trying to use Kamailio 3.1.x server (called LB here) as the Load
Balancer for two other Kamailio server (called server01 and server02 here) .
Client A -----> Kamailio LB -----> Kamailio server01
Client B -----> Kamailio LB -----> Kamailio server01
If I dont use LB here , and letting Client A and B connect to Kamailio
server01 directly , all the communication is fine.
While using Kamailio LB ,without luck, although the sip client A and
B get 200 from server01 for Register,
they cannot reach each other for "Message" and "Invite".
It will be great appreciated if anyone can give a hint.
my config for Kamailio LB is as below :
==========================================
....
debug=2 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
children=2
check_via=no # (cmd. line: -v)
dns=off # (cmd. line: -r)
rev_dns=off # (cmd. line: -R)
port=5060
# for more info: sip_router -h
# ------------------ module loading ----------------------------------
mpath="/usr/local/lib64/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "dispatcher.so"
loadmodule "db_mysql.so"
# ----------------- setting module-specific parameters ---------------
# -- dispatcher params --
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
modparam("dispatcher",
"db_url","mysql://.........@........")
modparam("usrloc", "db_mode", 0)
modparam("rr", "enable_full_lr", 1)
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
# if (!method=="REGISTER")
# record_route();
ds_select_dst("1","4");
forward();
exit;
}
..
==========================================
best regards,
chanea
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
6:16 p.m.
New subject: [sr-dev] SOS!! Kamailio 3.1.x Load Balancer doesn't work
Dear Klaus,
Thanks for your help. Both the server and clients are behind NAT.
After adding NAT traversal on the LB , now the clients are able to talk to
each other via "MESSAGE" method.
However, there is another issue that , every time the client A sends one
message to the server , the client B gets 3 or 4 copies of it from the
server.
Any idea how this happen?
best regards,
chanea
On Fri, Feb 22, 2013 at 12:35 AM, Klaus Darilion <
klaus.mailinglists(a)pernau.at> wrote:
Are the clients behind NAT? If yes, you have to use
proper NAT traversal
on the LB. Further, for outgoing INVITEs you have to route the requests
through the LB, either by static forwarding to the LB or using the Path
extension.
regards
Klaus
On 21.02.2013 12:36, chanea wrote:
> Dear All,
>
> I am trying to use Kamailio 3.1.x server (called LB here) as the Load
> Balancer for two other Kamailio server (called server01 and server02
> here) .
>
> Client A -----> Kamailio LB -----> Kamailio server01
> Client B -----> Kamailio LB -----> Kamailio server01
>
> If I dont use LB here , and letting Client A and B connect to Kamailio
> server01 directly , all the communication is fine.
>
> While using Kamailio LB ,without luck, although the sip client A and
> B get 200 from server01 for Register,
> they cannot reach each other for "Message" and "Invite".
>
> It will be great appreciated if anyone can give a hint.
>
> my config for Kamailio LB is as below :
> ==============================**============
> ....
> debug=2 # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=yes # (cmd line: -E)
>
> children=2
> check_via=no # (cmd. line: -v)
> dns=off # (cmd. line: -r)
> rev_dns=off # (cmd. line: -R)
> port=5060
>
> # for more info: sip_router -h
>
> # ------------------ module loading ------------------------------**----
> mpath="/usr/local/lib64/**kamailio/modules_k/:/usr/**
> local/lib64/kamailio/modules/"
>
> loadmodule "sl.so"
> loadmodule "tm.so"
> loadmodule "rr.so"
> loadmodule "maxfwd.so"
> loadmodule "usrloc.so"
> loadmodule "registrar.so"
> loadmodule "textops.so"
> loadmodule "mi_fifo.so"
> loadmodule "dispatcher.so"
> loadmodule "db_mysql.so"
>
>
> # ----------------- setting module-specific parameters ---------------
> # -- dispatcher params --
> modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
> modparam("dispatcher",
"db_url","mysql://.........@..**......")
> modparam("usrloc", "db_mode", 0)
> modparam("rr", "enable_full_lr", 1)
>
> route{
> if (!mf_process_maxfwd_header("**10")) {
> sl_send_reply("483","Too Many Hops");
> exit;
> };
>
> # if (!method=="REGISTER")
> # record_route();
> ds_select_dst("1","4");
> forward();
>
> exit;
>
> }
> ..
> ==============================**============
>
>
> best regards,
>
> chanea
>
>
>
> ______________________________**_________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
>
http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**dev<http://l…
>
>
24 Feb
24 Feb
1:20 p.m.
New subject: [sr-dev] SOS!! Kamailio 3.1.x Load Balancer doesn't work
Dear Klaus ,
Sorry , still stuck in this issue.
The part is still not correctly recorded in the server side behind LB for
REGISTER method.
Following your advice, my config file has been changed as below , anything
wrong ??
===========================================================
####### Routing Logic ########
# main request routing logic
route {
# per request initial checks
route(REQINIT);
# NAT detection
route(NAT);
# handle requests within SIP dialogs
route(WITHINDLG);
### only initial requests (no To tag)
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# record routing for dialog forming requests (in case they are routed)
# - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE|SUBSCRIBE"))
record_route();
# account only INVITEs
if (is_method("INVITE"))
{
setflag(1); # do accounting
}
# dispatch destinations
route(DISPATCH);
route(RELAY);
}
route[RELAY] {
#!ifdef WITH_NAT
if (check_route_param("nat=yes")) {
setbflag(FLB_NATB);
}
if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) {
route(RTPPROXY);
}
#!endif
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Per SIP request initial checks
route[REQINIT] {
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if(!sanity_check("1511", "7"))
{
xlog("Malformed SIP message from $si:$sp\n");
exit;
}
}
# Caller NAT detection route
route[NAT] {
force_rport();
if (nat_uac_test("19")) {
#xlog("L_INFO","ALERT: ua is behind NAT (ru:$ru)(IP:$si:$sp)\n");
if (method=="REGISTER") {
fix_nated_register();
} else {
fix_nated_contact();
}
setflag(FLT_NATS);
}
return;
}
# RTPProxy control
route[RTPPROXY] {
if (is_method("BYE")) {
unforce_rtp_proxy();
} else if (is_method("INVITE")){
xlog("L_INFO","ALERT: force_rtp_proxy called\n");
force_rtp_proxy();
}
if (!has_totag()) add_rr_param(";nat=yes");
return;
}
# Handle requests within SIP dialogs
route[WITHINDLG] {
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
}
route(RELAY);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(PRESENCE);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK;
# must be ACK after a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and discard.
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
}
# Dispatch requests
route[DISPATCH] {
# round robin dispatching on gateways group '1'
if(!ds_select_dst("1", "0"))
{
send_reply("404", "No destination");
exit;
}
xlog("L_INFO", "--- SCRIPT: going to <$ru> via <$du>\n");
t_on_failure("RTF_DISPATCH");
return;
}
# Sample failure route
failure_route[RTF_DISPATCH] {
if (t_is_canceled()) {
exit;
}
# next DST - only for 500 or local timeout
if (t_check_status("500")
or (t_branch_timeout() and !t_branch_replied()))
{
if(ds_next_dst())
{
t_on_failure("RTF_DISPATCH");
route(RELAY);
exit;
}
}
}
===========================================================
On Fri, Feb 22, 2013 at 12:35 AM, Klaus Darilion <
klaus.mailinglists(a)pernau.at> wrote:
Are the clients behind NAT? If yes, you have to use
proper NAT traversal
on the LB. Further, for outgoing INVITEs you have to route the requests
through the LB, either by static forwarding to the LB or using the Path
extension.
regards
Klaus
On 21.02.2013 12:36, chanea wrote:
> Dear All,
>
> I am trying to use Kamailio 3.1.x server (called LB here) as the Load
> Balancer for two other Kamailio server (called server01 and server02
> here) .
>
> Client A -----> Kamailio LB -----> Kamailio server01
> Client B -----> Kamailio LB -----> Kamailio server01
>
> If I dont use LB here , and letting Client A and B connect to Kamailio
> server01 directly , all the communication is fine.
>
> While using Kamailio LB ,without luck, although the sip client A and
> B get 200 from server01 for Register,
> they cannot reach each other for "Message" and "Invite".
>
> It will be great appreciated if anyone can give a hint.
>
> my config for Kamailio LB is as below :
> ==============================**============
> ....
> debug=2 # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=yes # (cmd line: -E)
>
> children=2
> check_via=no # (cmd. line: -v)
> dns=off # (cmd. line: -r)
> rev_dns=off # (cmd. line: -R)
> port=5060
>
> # for more info: sip_router -h
>
> # ------------------ module loading ------------------------------**----
> mpath="/usr/local/lib64/**kamailio/modules_k/:/usr/**
> local/lib64/kamailio/modules/"
>
> loadmodule "sl.so"
> loadmodule "tm.so"
> loadmodule "rr.so"
> loadmodule "maxfwd.so"
> loadmodule "usrloc.so"
> loadmodule "registrar.so"
> loadmodule "textops.so"
> loadmodule "mi_fifo.so"
> loadmodule "dispatcher.so"
> loadmodule "db_mysql.so"
>
>
> # ----------------- setting module-specific parameters ---------------
> # -- dispatcher params --
> modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
> modparam("dispatcher",
"db_url","mysql://.........@..**......")
> modparam("usrloc", "db_mode", 0)
> modparam("rr", "enable_full_lr", 1)
>
> route{
> if (!mf_process_maxfwd_header("**10")) {
> sl_send_reply("483","Too Many Hops");
> exit;
> };
>
> # if (!method=="REGISTER")
> # record_route();
> ds_select_dst("1","4");
> forward();
>
> exit;
>
> }
> ..
> ==============================**============
>
>
> best regards,
>
> chanea
>
>
>
> ______________________________**_________________
> sr-dev mailing list
> sr-dev(a)lists.sip-router.org
>
http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**dev<http://l…
>
>
4078
days inactive
4081
days old
3 comments
2 participants
participants (2)
-
chanea -
Klaus Darilion