I am not sure if cisco IOS supports hairpin traffic, but I think that's your
problem. It doesn't show "supported" in
http://www.ietf.org/internet-drafts/draft-jennings-midcom-stun-results-02.tx
t.
_____
From: Raymond Chen [mailto:rchen@cityabove.net]
Sent: Tuesday, January 18, 2005 5:45 PM
To: 'Richard'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT
There is not firewall, we use cisco 7507 to perform NAT.
Ray
_____
From: Richard [mailto:richard@o-matrix.org]
Sent: Wednesday, January 19, 2005 11:41 AM
To: 'Raymond Chen'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT
What firewall do you have?
Your firewall probably has problems to support hairpin traffic.
Richard
_____
From: Raymond Chen [mailto:rchen@cityabove.net]
Sent: Tuesday, January 18, 2005 4:56 PM
To: 'Richard'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT
We use SIPURA 2000 and rtpproxy. I have attached the sip message log.
Ray
_____
From: Richard [mailto:richard@o-matrix.org]
Sent: Wednesday, January 19, 2005 10:27 AM
To: 'Raymond Chen'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT
What nat device do you have? Does it have any sip helper module? Are you
running rtpproxy? It will be helpful if you can send a sip packet dump.
Richard
_____
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Raymond Chen
Sent: Tuesday, January 18, 2005 2:59 PM
To: 'Matt Schulte'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT
Matt,
Both port use different sip port, and can make calls at the same time. But
still can't get voice when call to each other.
Raymond
_____
From: Matt Schulte [mailto:mschulte@netlogic.net]
Sent: Tuesday, January 18, 2005 9:08 AM
To: Raymond Chen; serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT
If I had a guess I would say either the NAT or rtp/media proxy is getting
confused about which client is which. Ignoring the problem for a second, can
both sipura's make calls at the same time? Are you using NAThelper for this
with SER? You mentioned "without proxy", this would mean port forwarding?
Try this, make each sipura use a diff range of RTP ports (in their config).
Matt
-----Original Message-----
From: Raymond Chen [mailto:rchen@cityabove.net]
Sent: Monday, January 17, 2005 12:25 PM
To: serusers(a)lists.iptel.org
Subject: [Serusers] multiple SIPURA behind same NAT
Dear all,
I have two sipura box behind NAT. both use via header and can dial out and
received calls without proxy. but they have no voice when they call to each
other, any idea?
Raymond