Hello all,
I was able to make SRV query work with SER and bind 9x.
I was trying to use this pattern in bind zone file _sip._udp.testdomain.com which could be the reason why it rejected.
I modified to simple _sip.udp SRV 0 0 5060 server.testdomain.com and it started working.I did not know the reason.
Also why donot I see any NAPTR query from SER??
Regds karthikeyan.k
________________________________
From: Steve Blair [mailto:blairs@isc.upenn.edu] Sent: Thu 1/27/2005 5:10 PM To: Innovation Interops Cc: serusers@lists.iptel.org Subject: Re: [Serusers] DNS Support for SIP SRV records - RedHat Linux9.0
Can query manually query the DNS server for the SRV record? If so what happens?
innovation.interops@wipro.com wrote:
Hello all,
Have any one setup SIP srv records in Red Hat Linux 9.0 to work with SER.
I tried adding a SIP UDP based srv record in the zone file but when SER queries for the SRV record the DNS is replying not found even though it is available in the zone file.
I am using Bind 9x.
Regds karthikeyan.k
Confidentiality Notice
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin@wipro.com immediately and destroy all copies of this message and any attachments.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
--
ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104
voice: 215-573-8396
215-746-8001
fax: 215-898-9348
sip:blairs@upenn.edu
Confidentiality Notice
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin@wipro.com immediately and destroy all copies of this message and any attachments.
innovation.interops@wipro.com wrote:
Also why donot I see any NAPTR query from SER??
Use enum and you will see NAPTR queries.
I've never seen any SIP client using NAPTR to find the domains for the following SRV query. (as described in rfc 3262)
regards, klaus
On 28-01 10:08, Klaus Darilion wrote:
innovation.interops@wipro.com wrote:
Also why donot I see any NAPTR query from SER??
Use enum and you will see NAPTR queries.
I've never seen any SIP client using NAPTR to find the domains for the following SRV query. (as described in rfc 3262)
Neither did I, IMHO it adds too little value and it is not worth the overhead :-).
Jan.
On Friday 28 January 2005 18:02, Jan Janak wrote:
On 28-01 10:08, Klaus Darilion wrote:
innovation.interops@wipro.com wrote:
Also why donot I see any NAPTR query from SER??
Use enum and you will see NAPTR queries.
I've never seen any SIP client using NAPTR to find the domains for the following SRV query. (as described in rfc 3262)
Neither did I, IMHO it adds too little value and it is not worth the overhead :-).
Then you both did not looked at the Snom UA's closely enough :-) They do/support NAPTR lookups.
Greetings Nils
I am in nat, envio messages to another client but this it does not receive the instantaneous message. I have seen log and right lines of error appears two, this does not report ngrep, it uses I cosay and appeared these problems... as messenger 5.0 works? it is problem of the server or the client?
single it happens when envio a message, the slate and shared use of applications I hope that thanks can help me
# !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); #un cambio para ver si se consigue lo deseado if (!(search("^Content-Length:\ 0"))){ force_rtp_proxy(); }; } else if (nat_uac_test("1")) { fix_nated_contact(); }; }
4(4602) ERROR: extract_mediaport: can't parse `m=' in SDP 4(4602) ERROR: force_rtp_proxy2: can't extract media port from the message 2(4593) ERROR: extract_mediaport: can't parse `m=' in SDP 2(4593) ERROR: force_rtp_proxy2: can't extract media port from the message 2(4593) ERROR: on_reply processing failed
_________________________________________________________ Do You Yahoo!? Información de Estados Unidos y América Latina, en Yahoo! Noticias. Visítanos en http://noticias.espanol.yahoo.com
Nils Ohlmeier wrote:
On Friday 28 January 2005 18:02, Jan Janak wrote:
On 28-01 10:08, Klaus Darilion wrote:
innovation.interops@wipro.com wrote:
Also why donot I see any NAPTR query from SER??
Use enum and you will see NAPTR queries.
I've never seen any SIP client using NAPTR to find the domains for the following SRV query. (as described in rfc 3262)
Neither did I, IMHO it adds too little value and it is not worth the overhead :-).
Then you both did not looked at the Snom UA's closely enough :-) They do/support NAPTR lookups.
Greetings Nils
Kphone and Polycom Sounpoint support it too. Jan
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
innovation.interops＠wipro.com -
Jan Janak -
Jan Ruzicka -
Klaus Darilion -
Nils Ohlmeier -
Walter Willis