16 Jun
2022
16 Jun
'22
1:57 p.m.
Hello,
Is there any way to advertise a different IP Address in the Record-Route
header individually per branch?
I have a setup here - where Kamailio is listening on 2 different
interfaces: Local IP and External IP. At the moment if the packet is coming
through the internal interface - I'm checking where is it going to and
based on that I'm setting the Record-Route header accordingly - and
everything works well, except when I have multiple branches: one going
through the internal interface and another one through the external one, so
in this case, I have to add a different record-route header per branch, by
doing this in the branch_route - it's not working and getting the
error: w_record_route_advertised_address(): Double attempt to record-route.
What would be another way to accomplish this?
16 Jun
16 Jun
2:28 p.m.
Have you tried calling *t_save_lumps()* before relaying, even before RR?
On Thu, Jun 16, 2022 at 7:59 AM Ilie Soltanici <iliusha.md(a)gmail.com> wrote:
Hello,
Is there any way to advertise a different IP Address in the Record-Route
header individually per branch?
I have a setup here - where Kamailio is listening on 2 different
interfaces: Local IP and External IP. At the moment if the packet is coming
through the internal interface - I'm checking where is it going to and
based on that I'm setting the Record-Route header accordingly - and
everything works well, except when I have multiple branches: one going
through the internal interface and another one through the external one, so
in this case, I have to add a different record-route header per branch, by
doing this in the branch_route - it's not working and getting the
error: w_record_route_advertised_address(): Double attempt to record-route.
What would be another way to accomplish this?
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
3:19 p.m.
Hello,
Thank you, added it now - still the same, unfortunately.
Regards,
On Thu, 16 Jun 2022 at 13:29, Sergiu Pojoga <pojogas(a)gmail.com> wrote:
Have you tried calling *t_save_lumps()* before
relaying, even before RR?
On Thu, Jun 16, 2022 at 7:59 AM Ilie Soltanici <iliusha.md(a)gmail.com>
wrote:
Hello,
Is there any way to advertise a different IP Address in the Record-Route
header individually per branch?
I have a setup here - where Kamailio is listening on 2 different
interfaces: Local IP and External IP. At the moment if the packet is coming
through the internal interface - I'm checking where is it going to and
based on that I'm setting the Record-Route header accordingly - and
everything works well, except when I have multiple branches: one going
through the internal interface and another one through the external one, so
in this case, I have to add a different record-route header per branch, by
doing this in the branch_route - it's not working and getting the
error: w_record_route_advertised_address(): Double attempt to record-route.
What would be another way to accomplish this?
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
4:36 p.m.
Have you tried just *record_route()* with *enable_double_rr* option
enabled? All things considered, RR should take care of it all by itself,
per branch.
A script snippet could help.
On Thu, Jun 16, 2022 at 10:05 AM Patrick Karton <patrickarton(a)hotmail.com>
wrote:
It only work for request route.
Le 16 juin 2022 14:19, Ilie Soltanici <iliusha.md(a)gmail.com> a écrit :
Hello,
Thank you, added it now - still the same, unfortunately.
Regards,
On Thu, 16 Jun 2022 at 13:29, Sergiu Pojoga <pojogas(a)gmail.com> wrote:
Have you tried calling *t_save_lumps()* before relaying, even before RR?
On Thu, Jun 16, 2022 at 7:59 AM Ilie Soltanici <iliusha.md(a)gmail.com>
wrote:
Hello,
Is there any way to advertise a different IP Address in the Record-Route
header individually per branch?
I have a setup here - where Kamailio is listening on 2 different
interfaces: Local IP and External IP. At the moment if the packet is coming
through the internal interface - I'm checking where is it going to and
based on that I'm setting the Record-Route header accordingly - and
everything works well, except when I have multiple branches: one going
through the internal interface and another one through the external one, so
in this case, I have to add a different record-route header per branch, by
doing this in the branch_route - it's not working and getting the
error: w_record_route_advertised_address(): Double attempt to record-route.
What would be another way to accomplish this?
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
5:33 p.m.
I just did this quick POC test which worked as expected, it added a single
RR with public advertised and double RR with both public and private
advertise for the branch that routes to a private interface.
Prerequisites:
- mhomed=1
- modparam("rr", "enable_double_rr", 1)
- listen=YOUR_PUB_IP advertise "your_private_fqdn"
- listen=YOUR_PRIV_IP advertise "your_priv_fqdn"
- 10.22.0.0/24 is the private net
Script:
request_route {
record_route();
seturi("sip:a@google.com");
append_branch("sip:b@10.22.0.1", "1.0");
t_relay();
}
Give it a try.
On Thu, Jun 16, 2022 at 10:36 AM Sergiu Pojoga <pojogas(a)gmail.com> wrote:
Have you tried just *record_route()* with
*enable_double_rr* option
enabled? All things considered, RR should take care of it all by itself,
per branch.
A script snippet could help.
On Thu, Jun 16, 2022 at 10:05 AM Patrick Karton <patrickarton(a)hotmail.com>
wrote:
It only work for request route.
Le 16 juin 2022 14:19, Ilie Soltanici <iliusha.md(a)gmail.com> a écrit :
Hello,
Thank you, added it now - still the same, unfortunately.
Regards,
On Thu, 16 Jun 2022 at 13:29, Sergiu Pojoga <pojogas(a)gmail.com> wrote:
Have you tried calling *t_save_lumps()* before relaying, even before RR?
On Thu, Jun 16, 2022 at 7:59 AM Ilie Soltanici <iliusha.md(a)gmail.com>
wrote:
Hello,
Is there any way to advertise a different IP Address in the Record-Route
header individually per branch?
I have a setup here - where Kamailio is listening on 2 different
interfaces: Local IP and External IP. At the moment if the packet is coming
through the internal interface - I'm checking where is it going to and
based on that I'm setting the Record-Route header accordingly - and
everything works well, except when I have multiple branches: one going
through the internal interface and another one through the external one, so
in this case, I have to add a different record-route header per branch, by
doing this in the branch_route - it's not working and getting the
error: w_record_route_advertised_address(): Double attempt to record-route.
What would be another way to accomplish this?
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
17 Jun
17 Jun
1:02 p.m.
Adding that record route function can be used in branch_route only as
well, not required to have one call in request_route.
The suggested idea below, with advertise would be the one I would
recommend as well.
Cheers,
Daniel
On 16.06.22 17:33, Sergiu Pojoga wrote:
I just did this quick POC test which worked
as expected, it added a
single RR with public advertised and double RR with both public and
private advertise for the branch that routes to a private interface.
Prerequisites:
* mhomed=1
* modparam("rr", "enable_double_rr", 1)
* listen=YOUR_PUB_IP advertise "your_private_fqdn"
* listen=YOUR_PRIV_IP advertise "your_priv_fqdn"
* 10.22.0.0/24 <http://10.22.0.0/24> is the private net
Script:
request_route {
record_route();
seturi("sip:a@google.com <mailto:sip%3Aa@google.com>");
append_branch("sip:b@10.22.0.1 <mailto:sip%3Ab@10.22.0.1>",
"1.0");
t_relay();
}
Give it a try.
On Thu, Jun 16, 2022 at 10:36 AM Sergiu Pojoga <pojogas(a)gmail.com> wrote:
Have you tried just *record_route()* with /enable_double_rr/
option enabled? All things considered, RR should take care of it
all by itself, per branch.
A script snippet could help.
On Thu, Jun 16, 2022 at 10:05 AM Patrick Karton
<patrickarton(a)hotmail.com> wrote:
It only work for request route.
Le 16 juin 2022 14:19, Ilie Soltanici <iliusha.md(a)gmail.com> a
écrit :
Hello,
Thank you, added it now - still the same, unfortunately.
Regards,
On Thu, 16 Jun 2022 at 13:29, Sergiu Pojoga
<pojogas(a)gmail.com> wrote:
Have you tried calling *t_save_lumps()* before
relaying, even before RR?
On Thu, Jun 16, 2022 at 7:59 AM Ilie Soltanici
<iliusha.md(a)gmail.com> wrote:
Hello,
Is there any way to advertise a different IP
Address in the Record-Route header individually
per branch?
I have a setup here - where Kamailio is listening
on 2 different interfaces: Local IP and External
IP. At the moment if the packet is coming through
the internal interface - I'm checking where is it
going to and based on that I'm setting the
Record-Route header accordingly - and everything
works well, except when I have multiple branches:
one going through the internal interface and
another one through the external one, so in this
case, I have to add a different record-route
header per branch, by doing this in the
branch_route - it's not working and getting the
error: w_record_route_advertised_address(): Double
attempt to record-route.
What would be another way to accomplish this?
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial
Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the
recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do
not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not
reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - Online: June 20-23, 2022
* https://www.asipto.com/sw/kamailio-advanced-training-online/
4:56 p.m.
Hello,
Indeed, by using advertised and enable_double_rr enabled record route
header is added properly on all branches.
Thank You @Sergiu for your message and your time.
On Fri, 17 Jun 2022 at 12:04, Daniel-Constantin Mierla <miconda(a)gmail.com>
wrote:
Adding that record route function can be used in
branch_route only as
well, not required to have one call in request_route.
The suggested idea below, with advertise would be the one I would
recommend as well.
Cheers,
Daniel
On 16.06.22 17:33, Sergiu Pojoga wrote:
I just did this quick POC test which worked as expected, it added a single
RR with public advertised and double RR with both public and private
advertise for the branch that routes to a private interface.
Prerequisites:
- mhomed=1
- modparam("rr", "enable_double_rr", 1)
- listen=YOUR_PUB_IP advertise "your_private_fqdn"
- listen=YOUR_PRIV_IP advertise "your_priv_fqdn"
- 10.22.0.0/24 is the private net
Script:
request_route {
record_route();
seturi("sip:a@google.com");
append_branch("sip:b@10.22.0.1", "1.0");
t_relay();
}
Give it a try.
On Thu, Jun 16, 2022 at 10:36 AM Sergiu Pojoga <pojogas(a)gmail.com> wrote:
Have you tried just *record_route()* with
*enable_double_rr* option
enabled? All things considered, RR should take care of it all by itself,
per branch.
A script snippet could help.
On Thu, Jun 16, 2022 at 10:05 AM Patrick Karton <patrickarton(a)hotmail.com>
wrote:
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Kamailio Advanced Training - Online: June 20-23, 2022
* https://www.asipto.com/sw/kamailio-advanced-training-online/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
It only work for request route.
Le 16 juin 2022 14:19, Ilie Soltanici <iliusha.md(a)gmail.com> a écrit :
Hello,
Thank you, added it now - still the same, unfortunately.
Regards,
On Thu, 16 Jun 2022 at 13:29, Sergiu Pojoga <pojogas(a)gmail.com> wrote:
Have you tried calling *t_save_lumps()* before relaying, even before RR?
On Thu, Jun 16, 2022 at 7:59 AM Ilie Soltanici <iliusha.md(a)gmail.com>
wrote:
Hello,
Is there any way to advertise a different IP Address in the Record-Route
header individually per branch?
I have a setup here - where Kamailio is listening on 2 different
interfaces: Local IP and External IP. At the moment if the packet is coming
through the internal interface - I'm checking where is it going to and
based on that I'm setting the Record-Route header accordingly - and
everything works well, except when I have multiple branches: one going
through the internal interface and another one through the external one, so
in this case, I have to add a different record-route header per branch, by
doing this in the branch_route - it's not working and getting the
error: w_record_route_advertised_address(): Double attempt to record-route.
What would be another way to accomplish this?
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
688
days inactive
689
days old
7 comments
4 participants
participants (4)
-
Daniel-Constantin Mierla -
Ilie Soltanici -
Patrick Karton -
Sergiu Pojoga