Hello Danel, Thank you for your response,
Well i don't have SELinux enabled and IPTables isn't running.
About kamailio configuration, Pike module isn't also enabled, the only thing that i have enabled to limit the number of concurrent calls is the dialog module, counting the number of active dialogs and reject next new invites only after it has reached the 10.000 simultaneous calls.
The strange behavior is that kamailio only stop processing some sip messages like Byes and 200 Ok after more or less 40 seconds after siptester start sending calls.
And i can see several cases in wireshark that kamailio receives BYES/200OK from interface B(Carriers interface) but it isn't forward to Interface A(customer interface), if i make for example 20cps i don't have this issue, all packets are handled correctly and there isn't 408 requests timeouts.
Best Regards José Seabra
2015-09-27 13:52 GMT+01:00 Daniel-Constantin Mierla miconda@gmail.com:
The tmp variable is not intialized by default, so it can be anything therefore the out of bounds value. It used only when printing some errors, so it didn't get a proper value as no such error was printed for you case.
The backtrace shows the process in in recvfrom(), so it waits for traffic from network. That is the case when the processing of former sip message was finished and now Kamailio waits to receive another one.
If you run centos, be sure you don't have limits in selinux rules - better disable it completely and test again. Also, be sure you don't have limits in the firewall, especially contrack module and sip firewall modules in the kernel.
In kamailio.cfg, if you have pike module, be sure you don't drop good packet with this module.
Cheers, Daniel
On 25/09/15 19:53, José Seabra wrote:
Adding more information to my last email, when kamailio starts receiving calls, after more or less 40 seconds it stops processing some sip messages.
I'm using the kamailio version 4.3.2
Best Regards
2015-09-25 18:34 GMT+01:00 José Seabra joseseabra4@gmail.com:
I have one kamailio server listening in 2 network interfaces, kamailio receives sip messages from interface A and then send it to destine through interface B. When we start kamailio service then run gdb for each kamailio network interface process, execute the command "bt full" the result is the following:
*tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out of bounds>*
interface - A
bt full #0 0x00007fb01bfa40c3 in recvfrom () from /lib64/libc.so.6 No symbol table info available. #1 0x000000000047f2ba in udp_rcv_loop () at udp_server.c:421 len = 13 buf = '\000' <repeats 65535 times> tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out of bounds> from = 0x7faf9bf38bb8 fromlen = 16 ri = {src_ip = {af = 2309178400, len = 32765, u = {addrl = {5458819, 4284160}, addr32 = {5458819, 0, 4284160, 0}, addr16 = {19331, 83, 0, 0, 24320, 65, 0, 0}, addr = "\203KS\000\000\000\000\000\000_A\000\000\000\000"}}, dst_ip = {af = 2, len = 4, u = {addrl = {80026686, 0}, addr32 = {80026686, 0, 0, 0}, addr16 = {7230, 1221, 0, 0, 0, 0, 0, 0}, addr = ">\034\305\004", '\000' <repeats 11 times>}}, src_port = 55576, dst_port = 5060, proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s = {sa_family = 32687, sa_data = "\000\000\200D\243\211\375\177\000\000\213\337D"}, sin = {sin_family = 32687, sin_port = 0, sin_addr = {s_addr = 2309178496}, sin_zero = "\375\177\000\000\213\337D"}, sin6 = {sin6_family = 32687, sin6_port = 0, sin6_flowinfo = 2309178496, sin6_addr = {__in6_u = {__u6_addr8 = "\375\177\000\000\213\337D\000\000\000\000\000p", <incomplete sequence \372\233>, __u6_addr16 = {32765, 0, 57227, 68, 0, 0, 21616, 39930}, __u6_addr32 = {32765, 4513675, 0, 2616874096}}}, sin6_scope_id = 32687}}, bind_address = 0x7faf9becd7d8, proto = 1 '\001'} __FUNCTION__ = "udp_rcv_loop" #2 0x0000000000525eae in main_loop () at main.c:1573 i = 0 pid = 0 si = 0x7faf9becd7d8 si_desc = "udp receiver child=0 sock=62.28.197.4:5060 \000\000\000\000\000\000\001\000\000\000\000\000\000\000\260\244r\023n\000\000\000\071\263q\000\000\000\000\000\020\243q\000\000\000\000\000\b\000\000\000\001\000\000\000\260\373\371\233\257\177\000\000\220E\243\211\375\177\000\000|\351O\000\000\000\000\000\000\266\253\023\257\177\000\000\260\244r\023\257\177\000" ---Type <return> to continue, or q <return> to quit--- nrprocs = 32 __FUNCTION__ = "main_loop" #3 0x000000000052c395 in main (argc=11, argv=0x7ffd89a34848) at main.c:2533 cfg_stream = 0x2296010 c = -1 r = 0 tmp = 0x7ffd89a35f61 "" tmp_len = 0 port = 0 proto = 32688 options = 0x725010 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:" ret = -1 seed = 1641321572 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7ffd89a34710 p = 0x7fb01bf4c646 <intel_check_word+166> "H\205\300t\025\017\266P\003\017\266\312D9\371\017\204", <incomplete sequence \305> __FUNCTION__ = "main"
interface B bt full #0 0x00007fb01bfa40c3 in recvfrom () from /lib64/libc.so.6 No symbol table info available. #1 0x000000000047f2ba in udp_rcv_loop () at udp_server.c:421 len = 45
buf = '\000' <repeats 65535 times> tmp = 0x13cb2f24296000e9 <Address 0x13cb2f24296000e9 out ofbounds> from = 0x7faf9bf38bb8 fromlen = 16 ri = {src_ip = {af = 2309178400, len = 32765, u = {addrl = {5458819, 4284160}, addr32 = {5458819, 0, 4284160, 0}, addr16 = {19331, 83, 0, 0, 24320, 65, 0, 0}, addr = "\203KS\000\000\000\000\000\000_A\000\000\000\000"}}, dst_ip = {af = 2, len = 4, u = {addrl = {2764381246, 0}, addr32 = {2764381246, 0, 0, 0}, addr16 = {7230, 42181, 0, 0, 0, 0, 0, 0}, addr = ">\034Ť", '\000' <repeats 11 times>}}, src_port = 56136, dst_port = 5060, proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s = {sa_family = 32687, sa_data = "\000\000\200D\243\211\375\177\000\000\213\337D"}, sin = {sin_family = 32687, sin_port = 0, sin_addr = {s_addr = 2309178496}, sin_zero = "\375\177\000\000\213\337D"}, sin6 = {sin6_family = 32687, sin6_port = 0, sin6_flowinfo = 2309178496, sin6_addr = {__in6_u = { __u6_addr8 = "\375\177\000\000\213\337D\000\000\000\000\000p", <incomplete sequence \372\233>, __u6_addr16 = {32765, 0, 57227, 68, 0, 0, 21616, 39930}, __u6_addr32 = {32765, 4513675, 0, 2616874096}}}, sin6_scope_id = 32687}}, bind_address = 0x7faf9becda08, proto = 1 '\001'} __FUNCTION__ = "udp_rcv_loop" #2 0x0000000000525eae in main_loop () at main.c:1573 ---Type <return> to continue, or q <return> to quit--- i = 0 pid = 0 si = 0x7faf9becda08 si_desc = "udp receiver child=0 sock=62.28.197.164:5060 \000\000\000\000\001\000\000\000\000\000\000\000\260\244r\023n\000\000\000\071\263q\000\000\000\000\000\020\243q\000\000\000\000\000\b\000\000\000\001\000\000\000\260\373\371\233\257\177\000\000\220E\243\211\375\177\000\000|\351O\000\000\000\000\000\000\266\253\023\257\177\000\000\260\244r\023\257\177\000" nrprocs = 32 __FUNCTION__ = "main_loop" #3 0x000000000052c395 in main (argc=11, argv=0x7ffd89a34848) at main.c:2533 cfg_stream = 0x2296010 c = -1 r = 0 tmp = 0x7ffd89a35f61 "" tmp_len = 0 port = 0 proto = 32688 options = 0x725010 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:" ---Type <return> to continue, or q <return> to quit--- ret = -1 seed = 1641321572 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7ffd89a34710 p = 0x7fb01bf4c646 <intel_check_word+166> "H\205\300t\025\017\266P\003\017\266\312D9\371\017\204", <incomplete sequence \305> __FUNCTION__ = "main"
[root@c4-srv1 kamailio]# kamctl stats shmem shmem:fragments = 2552 shmem:free_size = 2082764040 shmem:max_used_size = 66449600 shmem:real_used_size = 64719608 shmem:total_size = 2147483648 shmem:used_size = 54355992
Can anyone explain the meaning of *tmp = 0x5f801b994c4715bd <Address 0x5f801b994c4715bd out of bounds>*
Best Regards José Seabra
-- Cumprimentos José Seabra
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com Kamailio Advanced Training, Sep 28-30, 2015, in Berlin - http://asipto.com/u/kat
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users