Thank you for your reply Daniel, I understand that you are very busy with work.
These attributes indentichny and are one and same data. Billing System (Radius server) these attributes allow the maximum call time for the client. Perhaps there is contact Ovidiu Sas or Juha Heinanen, who developed this module? Yes, just substitute the code C++ Session-Timeout does not work ((
It would be nice to do to download any attribute value, for example: modparam("auth_radius", "auth_get", "Session-Timeout=$avp(time);h323-credit-time=$avp(cisco-time)");
/etc/radiusclient-ng/dictionary ATTRIBUTE Session-Timeout 27 integer
/etc/radiusclient-ng/dictionary.cisco VENDOR Cisco 9 ATTRIBUTE h323-credit-time 102 string Cisco
16.12.2014, 02:11, "Daniel-Constantin Mierla" miconda@gmail.com:
On 15/12/14 13:31, Kalala Alexander wrote:
Daniel,
Possible to make changes to the module for the understanding of AVP from Radius?
As said, it will probably require a bit of C coding. I haven't dealt with Radius for many years. What is the AVP id for Session-Timeout (as defined in the radius dictionary)?
Daniel
11.12.2014, 18:11, "Daniel-Constantin Mierla" miconda@gmail.com:
Looking a bit deeper in the code, apparently only SIP_AVP (code 27) are added as avps -- see generate_avps():
modules/auth_radius/sterman.c
For adding all radius avps, I guess some extra C code needs to be pushed there.
Cheers, Daniel
On 11/12/14 14:57, Kalala Alexander wrote:
I have done avp_print (); Here's the output:
1(11832) INFO: avpops [avpops_impl.c:1488]: ops_print_avp(): name=<digest_challenge> 1(11832) INFO: avpops [avpops_impl.c:1496]: ops_print_avp(): val_str=<Proxy-Authenticate: Digest realm="sip.voip.by", nonce="VIgtSVSILB3mhgkw9TUSxb2W5cVvKr4S", qop="auth"
Received no attributes in the AVP (For Example "Session-Timeout")... The answer comes from the Radius after proxy_challenge("$fd", "0");
Access-Accept (2) AVP: l=6 t=Session-Timeout(27): 11234
11.12.2014, 16:06, "Daniel-Constantin Mierla" miconda@gmail.com:
Not using radius myself, but a quick look at the code reveals that some avps are generated after authentication. You can print the list of the avps with avp_print():
http://kamailio.org/docs/modules/stable/modules/avpops.html#avpops.f.avp_pri...
Then you can see what is getting back from radius.
Cheers, Daniel
On 10/12/14 20:42, Kalala Alexander wrote:
Radius server sends a response containing an attribute (Session-Timeout (27): 2342). How is the value saved in the AVPs using module auch_radius?
Config:
modparam("auth_radius", "radius_config","/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type",15) modparam("auth_radius", "use_ruri_flag", 22) modparam("auth_radius", "auth_extra", "Calling-Station-Id=$fU;Called-Station-Id=$tU;Acct-Session-Id=$ci")
if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!radius_www_authorize("$td")) { www_challenge("$td", "0"); exit; }
if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } }
...............................
if (from_uri==myself) { if (!radius_proxy_authorize("$fd", "$fU")) { proxy_challenge("$fd", "0"); exit;
}
-- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users