4 Oct
2003
4 Oct
'03
12:37 a.m.
OK, I think this conversation must have been confused by geographic
barriers. In north America, when you call someone your phone number
shows up on their phone. The Caller-ID or ANI. Strangely, the username
of the from address is showing up in my caller-id window.... if the
username is 256(a)test.com, 256 shows up as the caller-id. If the
username is test(a)test.com, 4534 shows up as the caller-id. I want it to
show up as 1XXXXXXXXXX.
Maybe there is a telephony guru on the list that is more familiar with
the north American conventions that can help me to explain it better.
This field is mandatory for voice services here to identify the caller
to emergency services.
Subject: Re: [Serusers] caller-id with raius using sip-rpid
What is caller-id ? Is is a header field or what ? Example, please....
Jan.
On 03-10 16:21, Steve Dolloff wrote:
812a73562d346e6f",uri="sip:256@voip2.test.net",response="1a4552ce6c65333
"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes");
append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes"
I want caller-id to work for a subscriber who has a
non-numeric
username.
Subject: Re: [Serusers] caller-id with raius using sip-rpid
There is a Remote-Party-ID header in your message. What else do you
want ? Please be more specific and provide some examples, your
terminology is
hard to follow for me, sorry.
Jan.
On 03-10 16:05, Steve Dolloff wrote:
username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b
Calling from one ata to another, proxied and
registered through ser,
here is my ngrep port 5060 output. Remote-party-id is being set but
not
> the call-id.
>
> U 219.242.10.153:5060 -> 226.145.234.80:5060
> INVITE sip:256@226.145.234.80:5060;user=phone;transport=udp
> SIP/2.0..Max-Fo
> rwards: 10..Record-Route:
> <sip:256@219.242.10.153;ftag=2441840520;lr=on>..V
> ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via:
> SIP/2.0/
> UDP 226.145.234.113:5060;rport=5060..From:
> sip:test@voip2.test.net;tag=24418
> 40520..To: <sip:256@voip2.test.net;user=phone>..Call-ID:
> 2303820380(a)226.145.
> 234.113..CSeq: 2 INVITE..Contact:
> <sip:test@226.145.234.113:5060;transport=
> udp>..User-Agent: Cisco ATA 186 v2.16.2 ata18x
> (030909a)..Authorization: D
> igest
>
> 439b
> 6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type:
> applicatio
> n/sdp..Remote-Party-ID:
> 222;party=calling;id-type=subscriber;screen=no....v
> =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN
IP4
> 226.14
> 5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0
> PCMU/8000/1..
> a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101
> telephone-even
> t/8000..a=fmtp:101 0-15..a=direction:active..
> #
> U 226.145.234.80:5060 -> 219.242.10.153:5060
> SIP/2.0 100 Trying..Via: SIP/2.0/UDP
> 219.242.10.153;branch=z9hG4bK41f3.9e2c
> 3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From:
> sip:test@vo
> ip2.test.net;tag=2441840520..To:
> <sip:256@voip2.test.net;user=phone>;tag=2077
> 559661..Call-ID: 2303820380@226.145.234.113..CSeq: 2
INVITE..Server:
Cisco
ATA 186 v2.16.2 ata18x (030909a)..Content-Length: 0....
Subject: Re: [Serusers] caller-id with raius using sip-rpid
Is there any Remote-Party-ID header field in outgoing INVITE ? If so
then your gateway/whatever ignores it.
Jan.
On 02-10 15:18, Steve Dolloff wrote:
> Any phone that supports caller-id. But I haven't gotten to work.
I'm
seeing
the username instead.
Subject: RE: [Serusers] caller-id with raius using sip-rpid
Which phone device should I use to see caller ID
information when using the ATA186?
Alejandro
--- Steve Dolloff <sdolloff(a)noc.test.net> escreveu: >
At the top of the config I have the following
statement....
if (method=="INVITE") {
record_route();
if (!radius_www_authorize("")) {
log(1,"radius auth
failure");
www_challenge("voip2.test.net","0");
break;
};
append_rpid_hf();
};
If I call a phone with caller-id and my username is
256, it shows 256 on
the phone, if I call with a username of test, it
shows 4534 on the
handset even though I have the sip-rpid set to 222.
Stephen
Subject: Re: [Serusers] caller-id with raius using
sip-rpid
Retrieving caller-id when users register doesn't
work because REGISTER
messages are processed by the server and the server
generates a reply
only.
What you need is to insert Remote-Party-ID header
field into INVITE
message, to make it work you must authenticate also
INVITE messages.
My guess is that you do not authenticate INVITE
messages and therefore
there is nothing append_rpid_hf can add.
Jan.
On 02-10 11:35, Steve Dolloff wrote:
> I want to retrieve the caller-id of a user from
radius when they
> register and use it when I redirect an invite
request to the voicemail
> system so that the voicemail system can route the
call based on
> caller-id. I also want to be able to send it to
the sip gateway when
I
> am routing calls to the pstn.
>
> I have this in my config currently and it doesn't
appear to set the
> caller-id in the invite message.
>
>
rewritehostport("219.242.10.153:5061");
> append_rpid_hf();
> t_relay();
>
>
> Subject: Re: [Serusers] caller-id with raius using
sip-rpid
>
> append_rpid_hf has no parameters. Version with 2
parameters is in
> unstable branch in the CVS only. What exactly do
you want to do ?
>
> Jan.
>
> On 02-10 11:26, Steve Dolloff wrote:
> > I found this example in a previous Serusers
message.
> >
> > append_rpid_hf("<sip:+",
> >
> >
>
> >
> > I tried calling append_rpid_hf();, but it does
nothing.
> >
> > I also tried
> >
>
> > > > > ); but I get an unknown
command presumably
> > > because I am not using
> > > the
> > > > > right number of parameters.
> > > > >
> > > > > I only want to modify the calling-id info.
> > > > >
> > > > > Can anyone provide an example?
> > > > >
> > > > > -----Original Message-----
> > > > > From: Jan Janak [mailto:jan@iptel.org]
> > > > > Sent: Thursday, October 02, 2003 11:09 AM
> > > > > To: Steve Dolloff
> > > > > Cc: serusers(a)lists.iptel.org
> > > > > Subject: Re: [Serusers] caller-id with raius
> > > using sip-rpid
> > > > >
> > > > > If you want to add Remote-Party-ID header field
> > > then you have to
> > > call
> > > > > append_rpid_hf function in your script.
> > > > >
> > > > > Jan.
> > > > >
> > > > > On 02-10 11:07, Steve Dolloff wrote:
> > > > > > OK, I am setting up a Voicemail system (using
> > > asterisk) and I am
> > > > > > currently doing a rewritehostport(ip:port) and
> > > then trelay() to
> > > send
> > > > > it
> > > > > > to the voicemail system if an invite fails.
> > > > > >
> > > > > > Should I change something? See my ser.cfg and
> > > output from the call
> > > > to
> > > > > > the vm.
> > > > > >
> > > > > > Here is the code from ser.cfg
> > > > > >
> > > > > >
> > > > > rewritehostport("219.242.10.153:5061");
> > > > > > t_relay();
> > > > > >
> > > > > > Here is the sip info from asterisk.
> > > > > >
> > > > > > INVITE sip:200@219.242.10.153:5061;user=phone
> > > SIP/2.0
> > > > > > Max-Forwards: 10
> > > > > > Record-Route:
> > > <sip:200@219.242.10.153;ftag=2236658534;lr=on>
> > > > > > Via: SIP/2.0/UDP
> > > 219.242.10.153;branch=z9hG4bK13de.31901234.0
> > > > > > Via: SIP/2.0/UDP
> > > 226.145.234.113:5060;rport=5060
> > > > > > From: sip:test@voip2.test.net;tag=2236658534
> > > > > > To: <sip:200@voip2.test.net;user=phone>
> > > > > > Call-ID: 2218108971(a)226.145.234.113
> > > > > > CSeq: 1 INVITE
> > > > > > Contact:
> > > <sip:test@226.145.234.113:5060;transport=udp>
> > > > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x
> > > (030909a)
> > > > > > Expires: 300
> > > > > > Content-Length: 271
> > > > > > Content-Type: application/sdp
> > > > > >
> > > > > >
> > > > > >
> > > > > > Subject: Re: [Serusers] caller-id with raius
> > > using sip-rpid
> > > > > >
> > > > > > Remote-Party-ID header field is inserted into
> > > forwarded requests,
> > > > not
> > > > > > responses.
> > > > > >
> > > > > > Jan.
> > > > > >
> > > > > > On 02-10 10:53, Steve Dolloff wrote:
> > > > > > > Ser doesn't appear to be passing the
> > > Caller-id to the ata at
> > > auth
> > > > or
> > > > > I
> > > > > > > am doing something wrong. Can anyone point
> > > me in the right
> > > > > direction?
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > > Stephen
> > > > > > >
> > > > > > > I have the following entry in my freeradius
> > > users file.
> > > > > > >
> > > > > > > test(a)voip2.test.net Auth-Type := Digest,
> > > User-Password == "test"
> > > > > > > Reply-Message = "Hello, test with
> > > digest", Sip-Rpid =
> > > > > > > "8472222222"
> > > > > > >
> > > > > > > When I run a radclient test I get the
> > > correct info..
> > > > > > >
> > > > > > > radclient -f digest.test 219.242.10.153:1812
> > > auth testing
> > > > > > > Received response ID 134, code 2, length =
> > > 57
> > >
> > === message truncated ===
> >
> > Yahoo! Mail - o melhor webmail do Brasil
> > http://mail.yahoo.com.br